Latest 2W Power Amplifier 27 KM long-range wireless video transmitter receiver living demo image data link transmission in 2022
In order to better show our customers the actual support distance and use the effect of the 2W PA 30km long-distance image transmission transmitter and receiver, we conducted an actual test recently and found a Meisha Peak, from here to the seaside of Nan’ao, The distance is 27 kilometers. This site passes through Dapeng Bay, the line of sight is visible, and there are no obstructions. It just simulates the use of the transmitter in the air and the receiver on the ground.
Table of Contents
How to choose the best long-range video transmitter and receiver?
Please consider the below points before you buy. Here are some tips for you.
1. Transmission distance from the transmitter and receiver. The further the distance, the larger the power amplifier required; the larger the power amplifier, the higher the battery capacity requirement. Therefore, you need to determine the wireless transmission distance according to your own project or drone.
2. LOS or NLOS, Is there any obstacle between the transmitter and receiver? All the transmission distances mentioned on this site are based on the LOS environment. If your use environment is NLOS, you need a larger power amplifier to have stronger diffraction and penetration capabilities. Also, consider placing a relay repeater module in the middle.
3. One-way or two-way transmission type? One-way is like TV or radio, you can get the video or data at the receiver only, and two-way like mobile phones and the internet, you can get living video and send data or joystick control commands to the transmitter’s camera from the receiver side remotely. Two-way has a downlink and an uplink both.
4. PA, Power Amplifier, it is a signal enlarger, for example, 1 watts, 2 watts, 5 watts, 10 watts, 20 watts, big PA support longer range and strong signal to Anti-jamming. When choosing a power amplifier, you also need to consider power consumption, which will also increase the capacity of the battery.
5. Antenna, A longer and bigger antenna will offer you better signal sensitivity. Omnidirectional FRP fiberglass antennas or automatic antenna tracking pan/tilts are recommended.
6. UART control, Do you need to send the AT command from the computer or portable tablet receiver via uart?
Please check the below link for more details.
https://ivcan.com/request-a-quote-of-wireless-video-transmission/
Or WhatApp us to get free support.
Test Map measured 27km from the transmitter to the receiver
27 KM Test Video on YouTube
Features for drone long-range video transmitter and receiver
1. Based on OFDM technology, an IP RJ45 camera (HD camera with ethernet) is recommended.
2. Two-way broadband wireless link equipment supports 30Mbps. (The receiver can get the audio-video download, it also can upload the data to the receiver)
3. Interface: 2X Ethernet ports, 3X RS232 serial ports, audio input-output (More control operation) If your camera is HDMI output, then it needs an extra encoder device, which can encode the HDMI video and audio signal to digital data to this transmitter. At the receiver, it can connect your computer or NVR directly, if you need the output to an HDMI monitor, then it also needs an extra decoder device to encode the digital data to HDMI video and audio signal.
4. Dual antennas: SMA connector. ANT1 is the main antenna to work in transmitter mode, and the ANT2 is the auxiliary antenna to work in receive mode.
5. Wireless working frequency band: 1428~1448MHz (1.4G) or 806~826MHz (800Mhz) or 2.4Ghz, support automatic frequency hopping in the frequency band (FHSS).
6. Wireless bandwidth: 3MHz, 5MHz, 10MHz, 20MHz, all nodes share the working bandwidth, and the maximum sharing rate of the system is 30Mbps.
7. Modulation mode: QPSK/QAM16/QAM64 automatic adaptation. Networking mode: point-to-point, point-to-multipoint star network, IP mesh networking, or relay networking. (like up to 6 cameras and transmitters to one receiver application.)
8. Wireless transmitting power: 2-watt, 5-watt, 10-watt power amplifier.
9. Node receiving sensitivity: -103 at 10MHz bandwidth.
10. Support AES128 encryption and decryption.
11. Transmission distance: 15km/30km/80km/150km range optional.
12. The device configuration and wireless working status can be viewed through the Web UI of the network port or the serial port.
13. Power supply: DC24~30V, 28V power supply is recommended, the maximum average power consumption is less than 1.4A@28V, and the instantaneous peak power supply requirement can reach 2.8A@28V.
14. Size: 124*67.8*28.5mm (excluding the connector extending out of the shell, etc.).
15. 27 KM long-range wireless video transmitter receiver Weight: 250 grams
One of our clients bought our 2W PA (Power Amplifier) with 30km, up to 150km wireless video transmitter and receiver, but we can not find a 30km Line of sight place to test in our city, there are many high buildings. But luckily we found a place called Meishajian Peak, which is about 27 kilometers from the top of the mountain to the seaside.
About Meishajian, please check the below two links.
https://www.trip.com/travel-guide/attraction/shenzhen/meishajian-45198174/
Although the client chose a 2W-PA 30km transmission distance transceiver system, the test video is only 27km, So it is a 27 KM long-range wireless video transmitter-receiver.
Let us show you the transmitter and receiver first.
To show you clearly, we put the devices on one top and one bottom side for you.
There is two SMA antenna. ANT1 is the main antenna and works in transceiver mode. ANT2 is an auxiliary antenna that works in receive mode.
There are 2 pieces of RJ45 ethernet input and power input. There is an Audio input and output connector, and the connector is three pieces of RS232 for UART data communication.
Before delivery, we take it out for testing and a live demo. It is hard to find a good place to test in our super large city, which needs 30km without obstacles. In this testing we have two teams, one team takes the IP camera and transmitter to the top of the mountain (Meishajian Peak), and another team takes the receiver and computer to the seaside (Nan’ao).
Where is the Air Unit Transmitter and Camera?
We put the transmitter, camera, and rechargeable battery on the rock.
On the map, we can see the distance measurement is 27.85km.(17.30 miles)
At the top of the mountain, the weather is bad and full of fog.
Here I use our last time demo video to show you our position and environment.
It was a sunny day, it was easy to watch the seaside.
Hope you see where are the transmitter and camera now.
That time we were at the top of the mountain to test another composite CVBS video transmitter COFDM-912T.
It also tested and passed 26km from the transmitter and receiver.
Today The set we tested is a long-range video data link system on the base of OFDM, which means the transmitter and receiver are the total same and support RJ45 IP web camera video input via ethernet connector.
If your camera has HDMI output, then it needs an extra HDMI encoder IP RJ45 output board, which can encode the HDMI video and audio signal to digital data to this transmitter.
At the receiver, it can connect your computer or NVR directly, We used a notebook computer monitor as the receiver screen, RTSP player, or VLC player to play the living video streaming from the transmitter and camera.
This model Networking mode support point-to-point and point-to-multipoint star network.
Point to point means one transmitter and one receiver, Point to multipoint means up to 6 cameras from the different transmitters and one receiver at the Security monitoring center.)
They are two-way broadband wireless video data audio links, the receiver can get the audio and video download, and it also can upload the data to the transmitter, for example, some people need to control the PTZ camera via the joystick from the receiver.
Where is the Ground Unit Receiver and Computer (ground control station)?
At the receiver position, which is at the seaside, we use the two fiberglass antennae as the receiver’s antenna. Because the wireless video receiver supports RJ45 output, we can connect it by computer directly, with no need HDMI monitor.
The link and operation are very simple.
Now we will show you the video of the computer, it is from the computer recording screen software.
At the parameter of transmitter and receiver, there are two data in red, which shows the signal strength. Another import parameter shows the distance between the transmitter and the receiver.
This distance is calculated based on the time when the receiver sends some packets to the transmitter and receives their response from the transmitter.
Now we will show you the transmitter and receiver working details. The transmitter IP address is 192.168.1.12 and the receiver IP address is 192.168.1.11.
If you have any questions about our 27 KM long-range wireless video transmitter receiver, please feel free to contact us. I will show you the details in the next video.
What can you operate at the Web UI?
Do you want to see a 110km Real Test video?
Which model supports 150km?
Long-Range Wireless Video Transmitter and Receiver for camera datasheet download
Typical Applications and Usage Scenarios
Do you have a similar request?
Free Inquiry, Free Quote, Free Support!
-
15km 30km 80km 150km long-distance wireless video transmitter receiver transmission transceiver PA 2W 5W 10W -
Best FPV Video Transmitter Module 170-860Mhz Wireless RF audio video Transmitter for FPV Camera 3W PA 50km -
10W PA 150KM airborne video data link long-range UAV wireless transmission transmitter receiver broadband tactical handhold -
UAV drone video data link module wireless video transmitter and receiver for camera long-range TDD transceiver two-way vcan1401 -
COFDM video transmitter-receiver AV in HDMI out FPV, Wireless 10km-15km-30km long-range cheaper and longer COFDM-912T -
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver full Set Audio Video TX RX for UAV Drone 1080P 908T -
Two-way UAV Wireless Video Data RC Control Link module long-range bidirectional transceiver Transmitter-Receiver Vcan1681 -
COFDM Wireless Video HDMI Transmitter TX Transmission HDMI HD 1080P CVBS H264 Encoder COFDM-907T -
Wireless Video Transmitter and Receiver for Camera, HDMI HD H265 264 encoder 1W/2.5W PA 1080P60 Vcan1726 -
30-millisecond Drone UAV HDMI Wireless video transmitter Ultra-low-latency wireless transmission system Vcan1729 -
Drone mesh wireless video data link 150-200km longe-range centerless ad hoc network transceiver -
PA rf Power Amplifier for DVB-T COFDM TX Transmitter transmission 1-2-5-10-20-30-40-50-watt -
COFDM Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming -
HDMI To IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet RSTP UDP for UAV Drone Robotic -
UAV Wireless Video Data RC Link for Drone 15-20-30-50-100-150km 1.4G / 2.4G / 5.8G transceiver transmitter-receiver Vcan1818 -
COFDM wireless Ethernet transparent transmission module 100M bps RJ45 FDD video data transmitter and receiver -
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port vcan1816 -
22km wireless video data RC control link for ip ethernet camera transmitter and receiver fhss Vcan1806