Best FPV Video Transmitter Module 170-860Mhz Wireless RF audio video Transmitter for FPV Camera 3W PA 50km


Table of Contents
Video Transmitter TX Module
- We can adjust the RF bandwidth of this model to 2M/QPSK and increase the receiving sensitivity to -98 (actual), which is 7dB higher than the original sensitivity. This will more than double the corresponding transmission distance.
- What UAVs care about is the size and weight of the Video Transmitter TX Module. The weight of the whole machine can be within 100g.
- The Wireless Video Transmitter TX Module transmission itself has a delay of 75ms
- One-way COFDM video transmission, mainly used for FPV(First Person View)
- SD video transmission, RF bandwidth up to 2M, end-to-end delay of less than 200ms
- Default 3W PA support 50km (LOS)
- The default working frequency is 595 Mhz, and we can customize 170~860 Mhz

Video Receiver RX Module

RF Wireless Video Receiver Dimension 70×80×15mm
Here is the FPV video transmitter with a metal case.




Why this model is better than COFDM-912T as an FPV video transmitter?
The difference between COFDM-912T and FPV1887 wireless video transmission is
- The FPV1887 video transmission video delay latency is small, only 120 milliseconds. COFDM-912T delay is more than 400ms.
- With different modulation bandwidths, with the exact video resolution, the FPV1887 video transmission only requires 2MHz bandwidth, while COFDM-912T requires more than 6MHz.
- FPV1887 has a longer-range transmission distance, stronger diffraction performance, and anti-interference performance. Because it uses a narrower bandwidth, it has higher receiving sensitivity and takes up fewer resources.
- Smaller size and weight: Compared with COFDM-912T video transmission, the FPV-1887 video transmission adopts a more advanced encoding and modulation scheme, with lower overall power consumption, smaller size, and a weight of only 80g.
- The unique 45-degree RF antenna design is more suitable for the FPV and is more suitable for the high-speed flight angle of the FPV.
- The video transmission of this FVP1887 is suitable for vehicles with a flying speed of about 120km. For vehicles with higher flying speeds, the video delay will appear larger and the control will not be so good.
- More amplifiers to choose from 1 watts, 2 watts, 3 watts, and 4 watts. (default 3-watts support 50km)
FAQ
Question: Why does powering on the transmitter cause its shell to become very hot?
Answer: First, we tested this circuit board at temperatures of minus 40 degrees and 85 degrees. The hand feels very hot and will not affect the normal use of the transmitter.
Second: There are two reasons why the case temperature is a bit high:
Question About Product
- Was the product you need not found?
- Do the described here differ from your needs?
- Do you want to change it to suit your project?
- Do you still have questions about the product?
- Please tell us to customize it for you.