No products in the cart.
FHSS Frequency-hopping spread spectrum for wireless video data link transmitter and receiver
How does FHSS work on the drone wireless video transmitter and receiver?
FHSS is an automatic frequency modulation technology. We widely used FHSS in wireless video data transmission of drones. Because the drone’s wireless link is often subject to signal interference.
In this video, this frequency point shows the current signal strength.
The 1365 we see is the current signal working frequency point of our wireless transmission equipment.
Why does this frequency go here?
Because there are other signals on the right that are interfering. It will run automatically.
If the signal receives interference again, it runs away again, choosing the frequency with the least interference.
This process is meant to avoid interference. We also call it the FHSS function.
Q1: What is the FHSS Frequency-hopping spread spectrum?
A1: Frequency-hopping spread spectrum (FHSS) is a method of transmitting radio signals that involves rapidly changing the carrier frequency among a wide range of frequencies.
FHSS will occur automatically on both the transmitter and receiver at the same time. FHSS is used to prevent eavesdropping and interference on the long-range wireless video transmitter and receiver. When the current working frequency is jammed or interfered with, the transmitter and receiver disconnect and hop to the next available frequency to reconnect.
Q2: Why do you need the FHSS function?
A2:
1. Because the signal hops to a different frequency band, FHSS signals are highly resistant to narrow-band interference.
2. If the frequency-hopping pattern is unknown, signals are difficult to intercept.
3. Jamming is also difficult if the pattern is unknown; if the spreading sequence is unknown, the signal can only be jammed for a single hopping period.
4. With minimal mutual interference, FHSS transmissions can share a frequency band with many types of conventional transmissions. FHSS signals interfere in narrow-band communications and vice versa.
Q3: How to set the FHSS at your wireless video data transmitter and receiver?
A3: At the web manager UI, please choose the advance page, you can see the above picture.
https://i0.wp.com/ivcan.com/wp-content/uploads/2022/02/UI-Advance.webp
Q4: 7 tips you should know before you choose a wireless video transmitter and receiver with FHSS function.
A4:
1. TX900B-2W supports the frequency range is 1420~1530MHz, and there is 110Mb bandwidth to use.
2. The customer can set the working bandwidth as 1.4M/3M/5M/10M/20MHz (However, 1.4M/3MHz may not be suited for video transmitting). Then TX900B-2W can work in FHSS mode (Frequency-hopping spread spectrum) and the system will automatically select the central working frequency and may do frequency hopping (between 1420~1530MHz) during its working.
3. Customers can also plan to use the frequency channels in the whole 1420~1530MHz and set the device to work in the fixed frequency channels too.
4. TX900B-2W supports the longest distance at 22km.
Except for the frequency range supported and the longest distance, the physical appearance, interface, UI, operation, and so on, the TX900B-2W is the same as the existing TX900B-15km-2W.
5. TX900B-2W only support a frequency range is 1420~1530MHz, it does not support 800MHz and 2.4GHz frequency range.
6. There are two versions, TX900B-2W-15km, and TX900B-2W-22km.
7. As the TX900B-2W frequency range is 110Mb, so if you config the working bandwidth as 10Mb, then you will get 11 points to hopping.
Q5: What is the working principle of your FHSS?
Our wireless video transceiver adopts intelligent frequency selection-interference avoidance.
Intelligent frequency selection (interference avoidance) technology is a new anti-interference technology, which can effectively avoid interference and maximize the reliability and stability of wireless transmission.
The key to our unique intelligent frequency selection (interference avoidance) technology lies in the three major processes of interference detection, decision-making, and switching execution. Interference detection refers to real-time detection of interference and background noise at each frequency point during normal communication, so as to provide basic support for decision-making. The decision-making is completed independently by each node, and the optimal frequency is selected based on the criterion of optimizing its own receiving performance. The point is used as the receiving frequency point; the switching execution occurs after the decision selects a new optimal frequency point, and the switching process will not cause data loss, ensuring stable and continuous data transmission.
Our unique intelligent frequency selection (disturbance avoidance) technology enables each node to independently and dynamically select different optimal frequency points for different frequency networking, so as to optimize the overall network performance and effectively avoid interference.
Please check the below picture, the blue area is the effective signal, and the red line is interference. 
Q6: Do you have a video data link as per the below requirement?
The required distance is 50 kilometers, with frequency hopping technology (jumping over 1,000 times in one second), ideally above 6Ghz (others can be considered, the most important thing is frequency hopping technology), and it is also necessary to transmit data, video, and protect the remote control channel, preferably A set of data links (transmitter + receiver + antenna) using frequency hopping technology (FHSS)
iVcan Reply: No, The frequency is only 1.4G, the working frequency for 6Ghz needs custom development.
Q7: Do you have any optional model to support the FHSS Frequency-hopping spread spectrum?
In the below picture, you can see that there are 12 points frequency ready for FHSS.
Real-time interference detection function
2W PA 27KM Real Test from mountain top to seaside Line-of-Sight
Latest 110km test video for the drone Long-range Wirless Video Transmitter and Receiver
Latest test video for the drone Long-range Wirless Video Transmitter and Receiver
NLOS wireless video transmitter and receiver test video in building indoor lift non line of sight
65 KM drone UAV Really fly Test Wireless Video Transmission
1.5km for ground NLOS, 10-20-30km LOS air to ground wireless video transmitter receiver transmission
80KM wireless transmitter-receiver Video Data RC Transmission System HDMI SDI long-range low latency
COFDM-912T NLOS (non-line of sight) 1.5km real test in city, buildings, trees and roads
Web Device Management UI for UAV wireless video data link transmitter transmission by IP Net camera
6.5 KM drone UAV Really fly Test Vcan1643 Main Feature
One HDMI Wireless Video Transmitter to many receivers for home meeting show room.
SDI Camera input encode board + Wireless Video Transmitter assembly DIY
COFDM-907T HDMI + CVBS input NLOS (non-line of sight) 1.5km real test in city, buildings
Cheapest CVBS RCA 720P Wireless Video Transmitter + 1080P Receiver Support 128 encryption
How to set encryption on the transmitter and receiver to protect your privacy
COFDM-912T Really test in the complex city environment, transmitter in the car, receiver in the building
Modify the COFDM Wireless Video Receiver to 890 900Mhz, out of normal DVB-T reception range
Cheap Wireless video transmitter and receiver's small screen has great help on signal strength lock
Modify our tv box to 445.5Mhz 7M bandwidth COFDM DVB T wireless transmitter transmission receiver box
COFDM-905T COFDM Wireless Video Transmitter with two board, Encode board and transmitter board
COFDM-905T Wieless Video Transmitter by CVBS video input test video
how to connect mini wireless HDMI video transmitter and receiver kit use android phone as receiver
OFDM Wireless Video Transmitter for IP Cameras Lightweight Long Range Transmission Automatic Network
Transmission Distance
PA Power Amplifier Inside
Flight Control Protocol
Transmitter Video Input
Wireless Transmit Method
Obstacle and Sight
Encrypt and decrypt
Transmission Carrier
Data Direction
For
Frequency
Application Place
Feature
Antenna
Countries Sold
FAQs about Wireless Video Transmitter and Receiver
1. What types of video inputs port does your wireless video transmitter have?
Our wireless video transmitters have these types of video input interfaces: HDMI 1080P and 4K HDMI, CVBS composite, SDI, AHD, IP Ethernet, BNC, or tell us what type do you need, our engineer will modify to meet your demand.
2. What is the transmission distance supported by your wireless video transmitter?
Our transmission distance can be adjusted by adding power amplifiers. At present, the main ones are 15km, 30km, 50km, 80km, 100km , and 150km, which depend on the needs of customers.
Of course, the transmission distances listed above are all within LOS the line-of-sight range. If there are obstacles between the transmitter and the receiver, NLOS (the non-line-of-sight), the transmission distance is greatly reduced, only 1km or 2km, depending on the number of intermediate obstacles and the local wireless environment.
3. What is one-way or two-way? Simples vs half-duplex, full-duplex
One-way means, We can only transmit and download video or data from the wireless video transmitter to the receiver in one direction, and we cannot upload video or data from the receiver to the transmitter. This type is also called simplex.
Two-way means that, not only we can download video or data from our wireless transmitter to the receiver, but also we can upload the video or data from the receiver to the transmitter. This is very suitable for operating drones. You can not only see the real-time video transmitted from the drone, but also upload the command to control the drone or the command to control the PTZ camera to adjust the angle to the transmitter. This can operate simultaneously. This type also named half-dulpex or full-duplex.
Please check the details at the below link. https://ivcan.com/request-a-quote-of-wireless-video-transmission/#simplex
4. Does your HDMI video transmitter support encryption and receiver decryption?
Most Wireless video transmitters now support AES128 or AES256 bit encryption and decryption, depending on which model you choose. Please contact us to verify.
5. Can the frequency of the wireless video transmitter be modified after ordinary users receive the goods?
The frequencies of both the wireless video transmitter and the wireless video receiver can be modified. Users need to purchase additional parameter configuration boards.
However, considering that the corresponding power amplifier and antenna are already fixed within a certain range when the goods are sent out. If the user adjusts the frequency of the transmitter, the corresponding power amplifier, transmitter antenna and receiver antenna should also be modified to the same frequency, and these users need to be prepared. If not, it will cause the frequency of the wireless video transmitter to be different from the frequency of the antenna, making reception difficult. So please be sure to inform the correct frequency you need before placing an order.
If it is for security or confidentiality, you can use the encryption and decryption functions of the transmitter and receiver, which can ensure that your video transmission is private. .
6. I saw that your model is very similar to my needs, but I need to modify one of the parameters, is that possible?
Yes, all our product parameters can be customized according to customer's needs. If you have a special request, please let us know via the link below.
https://ivcan.com/request-a-quote-of-wireless-video-transmission/
7. What should I do if my wireless video receiver shows a weak signal?
- Change the place of the receiver to avoid potential local interference from strong magnetic environments.
- Ensure that the antennas on both the transmitter and receiver are vertical.
- Please raise the antennas of the transmitter and receiver to maintain a certain height difference.
- Please look around to ensure that there are no obstacles between the transmitter and receiver.
- Change the orientation of the receiver antenna.
- If it doesn't work, try moving the receiver to be near the transmitter's position to see if it exceeds the effective wireless transmission distance.
- Or consider adding a relay of the transmitting between the transmitter and receiver.
- The antenna should be as high off the ground as possible, as the ground will absorb the transmitted signal.
8. Can I buy modules of the transmitters and amplifiers only? I want to assemble them into my equipment.
We can, of course, supply wireless video transmitter modules and power amplifiers.
For the first sample test, I recommend that you purchase the entire set of products because our engineers have optimized the parameters to achieve the best performance.
After you have completed your test verification, you can remove the case or heat sink, install it in your device, and constantly adjust the parameters to achieve the best performance. In the future, you will be able to purchase only the modules or accessories that you require.
9. Can you take a test video for me to see before shipping?
Of course, we also understand that wireless video transmission transmitters and receivers are very expensive. You are far away from the China factory. and hope that the goods you receive are fit for the best performance.
If you pay special attention to a specific parameter or function, we can take some test videos based on the features you want to see, please feel free to contact us. It won't be shipped to you directly without your approval.
10. How to test the latency of wireless video transmitters and receivers?
To test the delay of the wireless video transmitter and receiver, we need to do two tests.
The first is to test the delay from the camera to the display.
The second is the camera, plus the display plus the wireless image transmission transmitter and the delay of the receiver.
Subtracting the two test results is the real delay of the wireless video transmitter and receiver.
As a professional long-range HDMI wireless video transmitter and receiver supplier and manufacturer in China Shenzhen, we produce the best wireless video transmitter and receiver for many years, and we got a good reputation and best reviews.
Some famous brands of wireless video transmitters, like Blackmagic, Holyland mars 300 400s, Accsoon cine eye 5g, RavenEye, Zhiyun, Inkee benbox, actiontec, CVW SWIFT 800, dahua, iogear, Artek pat-225k, microlite, nyrius, teradek.
The best budget wireless broadcast video transmitter and the receiver have many applications, for 4K tv, CCTV security camera, vehicle backup camera, PTZ video camera kit, battery-powered, computer, sony camcorder, wifi video conference system, CANON DSLR, UAV drone, pc computer laptop, projector, in-car, iPhone iPad, live streaming, GoPro sports camera, raspberry pi, Xbox.
The full HD video, audio, data link smallest 1080P wireless video transmitter and the receiver has many input and output connectors, like AV composite CVBS, HDMI, SDI, BNC, VGA, USB.
The wireless video transmitter sender TX RX frequency has 170-806Mhz, 1.2ghz, 2.4G, 5.8G, lowest but not zero latency. In order to support longer distances, the power amplifier has 10w, 20watts, and even 30W.
What is a best buy FHD wireless video transmitter at a cheap price? It should consider your details requirement, choose suitably, not expensive, if you have any doubt, please fulfil the request a quote form, our engineer will offer you a solution.
Latest 2W Power Amplifier 27 KM long-range wireless video transmitter receiver living demo image data link transmission in 2022
27 KM long-range wireless video transmitter receiver from the mountaintop to the seaside, tested the wireless video + data + control link for UAV In order to better show our customers the actual support distance and use the effect of the 2W PA 30km long-distance image transmission transmitter and receiver, [...]
Read More
06
Feb
Feb
New long-range wireless video transmitter and receiver for drone camera 110km 10W PA wireless video data audio link real test
110km test video of the long-range wireless video transmitter and receiver for the drone video camera Why do we want to do this 110km long-range test this time? Some clients ask me the longest distance of the wireless video transmitter and receiver, now we recommended this 10W Power Amplifier model, [...]
Read More
07
Oct
Oct
Latest Wireless Video Data Audio Transmitter and Receiver Test Video in 2022
Wireless Video Data Audio Transmitter and Receiver TX900 2 Watts 27km test video from mountain top to the seaside. (Video inside) Wireless Video Data Audio Transmitter and Receiver, Two-way, Download-Upload A customer saw our real test video about the 2 watts Power Amplifier 27km long-range wireless video transmitter and receiver. He [...]
Read More
01
Sep
Sep
60-80 km wireless video transmitter receiver transmission really flying test
Really a drone flying test of 60-80 km wireless video transmitter receiver transmission This is a video transmitter and receiver for drone UAV cameras, the best in 2023, and it has many satisfied reviews. It also supports ground to ground, if you have any project that needs a video transmitter [...]
Read More
24
Oct
Oct