IP Mesh 100Mbps wireless video data transceiver 2X5W PA 16 hop
Table of Contents
Features
- It not only supports point-to-point networking, but also supports mesh decentralized networks.
- It can support network speeds up to 100Mbps.
- The three network RJ45 ports can connect to three different network devices at the same time.
- One data serial port (RS232 or TTL optional) and one control serial port. If more serial ports are needed, it can also support the serial port to network port UDP broadcast protocol.
- Support transparent transmission*.
- Dual antenna: Primary and Secondary antenna, Dual Transmit and Dual Receive mode (2T2R),
- Supports CA (carrier aggregation) and MIMO mode
- Wireless working frequency band: 566~678MHz, 1420~1530MHz
- Supports automatic frequency hopping within the frequency band. (FHSS)
- Frequency range supports up to 110Mhz.
- Default built-in 2X5Watts amplifier (2X2W, 2X10 optional)
- Support AES128 encryption and decryption.
- Parameter Configured by Network port Web UI or the control serial port.
- DC 24~28V power supply.
Transparent Transmission
Transparent transmission refers to a communication mode where data is transmitted and received without modification, interpretation, or additional processing by the wireless transceiver. The transceiver simply acts as a relay, passing the data between devices as-is, ensuring that the original data structure and format remain unchanged.
Mesh Networking Type
Mesh networking is a type of network topology where multiple devices, or nodes, are interconnected to create a decentralized communication system. Unlike traditional networks that rely on a single central node or access node, mesh networks distribute connections among nodes, allowing them to relay data dynamically.
Support max 16 hops or 32 hops. (optional)
Weight and Size
Full Set
FAQ
Q1: Is it possible to configure one RF port for transmitting only and another for receiving only?
A1: The main antenna can be set to transmit and receive, and the secondary antenna can be set to receive only, not transmit, by turning off the CA and MiMo modes, but this will reduce the code stream by half!
Q2: What encryption algorithms does the transmitter support?
A2: SNOW3G, AES, ZUC.
Relative Post
Tadeush –
After testing multiple mesh systems for video transmission, this 100Mbps IP Mesh transceiver stands out for mission-critical reliability. The dual 5W PAs deliver exceptional signal penetration through dense urban structures and wooded terrain—no more dropouts during live drone inspections or construction site monitoring. What truly impresses is the 16-hop capability: we seamlessly relayed HD video feeds across 100kms of non-line-of-sight obstacles using only 4 nodes as repeaters, maintaining stable 10–15Mbps throughput end-to-end. Setup was plug-and-play with IP passthrough, and the self-healing mesh instantly rerouted signals when we intentionally blocked a node—perfect for mobile teams in dynamic environments. For industrial IoT cams, live event broadcasting, or remote surveillance, this is the unshakeable wireless backbone I’ve needed for years. Zero lag, zero fuss!