Suggestion for installing COFDM wireless video transmitter

Suggestion for installing COFDM wireless video transmitter

Do you have any suggestions for installing a COFDM Wireless Video transmitter to get the best performance?

Suggestion for installing COFDM wireless video transmitter

Installation Warning
1. Before Power On, the user should install the antenna and make sure that the interface is tightened. Otherwise, it will damage the circuit.
2. Please make sure the transmitter and receiver supply the voltage within the prescribed voltage range. Otherwise, it will damage the circuit.
3. Be able to keep the antenna of the transmitter down vertically and without any obstacles to prevent shortening communication distance because of blocking.
4. The antenna of the receiver should be able to keep away from large metal parts.
5. Please be sure to use the right type of antenna, the antenna frequency should be suitable for the transmitter frequency.
6. Please pay attention to keeping the proper distance between the electronic equipment to minimize electromagnetic interference.

Usage warning
1. Please make sure that all connecting wires are fastened and connected correctly.
2. There is no entry into any foreign body (e.g. liquid, sand, etc.)
3. The transmitter needs about 15 seconds to power on, after that, can transmit
4. Please ensure that there is no interference in the environment with the same frequency or high RF power wireless transmission equipment, otherwise, the receiver may not receive the video normally.
5. If the signal of the Receiver is poor, try to change the direction of the receiver antenna.
6. Using HDMI cable, LCD display, and other accessories, select a better electromagnetic shielding performance of the product as far as possible.

Open chat