UVC USB web camera to IP ethernet converter by RV1126 for wireless IP transmitter
Table of Contents
Encoder Modules Boards
Decoder Modules Boards
Available for Customization
New Encoder Products
| No. | Product Name | Configuration | Key Features | Status |
|---|---|---|---|---|
| 1 | Dual-Channel USB UVC Visible Light Video Encoder | 2× USB input | Supports dual USB camera video encoding, and RTSP streaming; local CVBS/HDMI output; switchable display modes | Mass Production |
| 2 | Dual-Channel Encoder (1× USB Visible Light + 1× USB Thermal Imaging camera) | 2× USB input | Supports dual USB camera (visible + thermal) capture, encoding, and RTSP streaming; local CVBS/HDMI output; switchable display modes | Mass Production |
| 3 | RTSP Decoder HDMI/CVBS Display Module | HDMI + CVBS output | Supports up to 4×1080P@30fps RTSP stream decoding; Support video streaming protocol forwarding; HDMI/CVBS output display | Sample Available |
| 4 | RTSP Decoder HDMI/CVBS Display Module with 4.3"/5" LCD | HDMI output + LCD screen | Supports up to 4×1080P@30fps RTSP stream decoding; protocol forwarding; HDMI/CVBS output display | Debugging |
| 5 | Dual-Channel Encoder (1× USB Visible Light + 1× CVBS Analog) | 1× CVBS + 1× USB UVC input | Dual video (USB + CVBS), encoding and RTSP streaming; local CVBS/HDMI output; switchable display modes | Debugging |
| 6 | Dual-Channel Encoder (1× USB UVC + 1× AHD Analog) | 1× AHD + 1× USB UVC input | Dual video capture (USB + AHD), encoding and RTSP streaming; local CVBS/HDMI output; switchable display modes | Debugging |
| 7 | Dual-Channel Encoder (1× CVBS + 1× AHD Analog Video) | CVBS + AHD 2 video input | Dual analog video capture, encoding and RTSP streaming; local CVBS/HDMI output; switchable display modes | Debugging |
| 8 | Dual-Channel Encoder (1× CMOS Camera + 1× USB Thermal Imaging camera) | 1× USB interface | Supports CMOS + USB thermal camera capture, encoding and RTSP streaming; local CVBS/HDMI output; switchable display modes | Mass Production |
For customized video input/output conversion solutions not listed in our products, please contact us for OEM/ODM support. We can develop tailored products based on your requirements.
The USB web camera to IP Ethernet converter based on the RV1126 processor is a compact, high-performance solution that allows any standard USB UVC camera to be converted into a professional IP camera stream. Designed for applications where flexibility, low latency, and high video quality are critical, this module is an ideal choice for wireless video transmission, remote monitoring, and integration into UAVs, robotics, security systems, and embedded vision platforms.
Overview
At its core, the converter utilizes Rockchip’s RV1126 SoC, a powerful processor with advanced ISP (Image Signal Processing), efficient hardware encoding (H.264/H.265), and multi-format codec support. By connecting a standard UVC-compliant USB camera, the RV1126 development board encodes and streams the video into Ethernet IP format. The video can then be transmitted through a wired LAN or further integrated with a wireless IP transmitter for long-range video applications.
This design makes it possible to turn any simple USB camera into an ONVIF/RTSP compatible IP camera, fully interoperable with NVRs, VMS systems, and RTSP video players. The solution is customizable for OEM/ODM projects where clients require hardware adaptation, firmware modification, or software development to meet specialized application requirements.
Feature
- Supports encoders from USB video device class UVC input
- How to turn your USB camera into an ONVIF IP webcam
- Create an IP Camera from a USB Camera
- USB camera to IP camera converter
- USB webcam ONVIF.
- UVC to TCP / IP.
- USB camera to Ethernet converter
- Web camera over IP
-
UVC to IP Conversion: Converts video from any USB UVC camera into RTSP/ONVIF IP streams.
-
High-Definition Video: Supports up to 4K resolution at 30FPS or 1080p resolution at 60FPS (depending on the camera and firmware).
-
Multi-format Encoding: H.264, H.265, and advanced H.265+ codecs for reduced bandwidth and storage.
-
Flexible Transmission Modes: Constant Bit Rate (CBR), Variable Bit Rate (VBR), and best-effort streaming options.
-
Wide Protocol Support: ONVIF, RTSP, CGI, and 28181 protocols for maximum compatibility.
-
Expandable I/O: Includes RS-485 for PTZ camera control, audio in/out, and TF card storage.
-
Networking Options: Standard 100M Ethernet port for wired IP streaming, with customization available for WiFi modules or wireless IP transmitters.
-
OEM/ODM Ready: Supports software customization, hard
Specification
| Specifications | RV1126 4K, 30 frames 1080p/60 frames |
| video processing | Support 30-frame codec, 1080P multi-format codec
Support encoding from USB video device class UVC input |
| image transmission
resolution |
4K (8 million)(3264*2448)
[16:9 mode (60 fps mode)] [16:9 mode (30 fps mode)][16:9 mode (50 fps mode)] [16:9 mode (25 fps mode)] 1920×1080, 1280×720, 640×360, 320×180 [4:3 mode (30 fps mode)] [4:3 mode (25 fps mode)] 1280×960, VGA, QVGA [4:3 mode (15 fps mode)] [4:3 mode (12.5 fps mode)] 2048×1536, 1280×960, VGA, QVGA |
| H.265+/H.264+ | [Transmission Mode] Constant bit rate / VBR / Frame rate / Best effort [Transmission Type] Unicast port (AUTO) / Unicast port (MANUAL) / Multi-cast |
| 485 PTZ function | support |
| network connection | Support wired network connection |
| Mobile computer direct connection | Support, wired connection via USB interface |
| hardware function | Support one key reset |
| audio function | Audio input and output functions (2Pin Mic) |
| Wireless WiFi function | Support, without wifi module |
| clock function | Support, remember Time settings with power disconnected |
| TF card | support |
| ONVIF RTSP
CGI protocol |
support |
| 28181 agreement | support |
| Network port function | Support RJ45 network cable connection |
| signal interface | One USB port, 4P 5V, D+/-, GND
one 100M Ethernet port (4Pin TX+/-, RX+/-) one TF/ Micro-SD card Slot
|
| Lightning Protection | The lightning protection of the power supply complies with the national standard GB/TI7626.5. |
| Business Function | Core module + hardware customization + software development + OEM/ODM |
| Support Protocol | IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, SSL/TLS, SMTP, DNS, NTP, SNMPv1/v2/v3, DHCPv6, |
| power supply | 5V- 12.8V +-20% power supply |
| size | 46mm*23mm*13mm (includes components) |
| Operation Temperature
|
-20℃ to 85℃ |
Typical Applications
-
Wireless UAV Video Transmission
The module can be paired with a wireless IP transmitter to provide live HD video feeds from drones. With low-latency encoding, it enables pilots and operators to view real-time images at long range. -
Industrial and Security Surveillance
Traditional USB cameras can be transformed into ONVIF IP cameras, reducing cost while maintaining professional interoperability. -
Robotics and Remote Monitoring
Robots, automated vehicles, and inspection devices can use this converter for remote vision over Ethernet or wireless links. -
Custom Embedded Systems
For manufacturers developing proprietary systems, the RV1126 board provides a flexible base for integration into products requiring IP streaming from USB imaging devices. -
Multi-Camera Solutions
The converter can support dual USB camera inputs, encoding them into Ethernet video streams simultaneously for applications such as 360° surveillance, stereoscopic vision, or multi-angle inspection.
Technical Highlights
-
Processor: Rockchip RV1126 with advanced image processing and video encoding.
-
Video Input: Standard USB UVC cameras.
-
Video Output: Ethernet/IP streams with ONVIF and RTSP support.
-
Resolution Options: 4K (30FPS), 1080p (60FPS), 720p, VGA, and more.
-
Audio: Integrated microphone input/output supported.
-
Storage: TF/MicroSD card slot for local video storage.
-
Power Supply: Wide input range (5V–12.8V).
-
Form Factor: Compact size (46mm × 23mm × 13mm).
-
Operating Temperature: –20℃ to +85℃ for industrial environments.
Advantages Over Traditional Solutions
-
Plug and Play: Any UVC USB camera can be connected without requiring special drivers.
-
High Efficiency: Hardware encoding reduces CPU load and lowers power consumption.
-
Flexible Deployment: Works in both wired Ethernet and wireless IP transmission scenarios.
-
Scalability: Easily integrated into multi-camera networks, NVRs, or cloud-based monitoring systems.
-
Customizable: Firmware can be adapted to support specific cameras, resolutions, or frame rates based on customer requirements.
FAQ
Q: Does your RV1126 DEV board support a USB camera at 60FPS?
My camera is HD (1920*1080) with 60FPS and IR camera (200*200) at 60, 120, and 200 FPS.
A: RV1126 maximum support 4K 30FPS, we don’t test your USB camera; it is better that you send us your real camera to test on our RV1126 Dev board. We also need to test or modify the firmware to support your USB camera’s driver.
The USB web camera to IP Ethernet converter based on RV1126 is a versatile, professional, and customizable solution for transforming simple USB webcams into advanced IP video devices. With support for ONVIF, RTSP, and multiple encoding formats, it enables seamless integration into existing surveillance and streaming systems. Whether for UAVs, robotics, security monitoring, or industrial inspection, this compact converter provides the bridge between USB imaging and IP video transmission.
Fedor –
The RV1126 USB-to-IP Ethernet Converter is a standout! Seamlessly transforms USB webcams into wireless IP transmitters with HD clarity and near-zero latency. Plug-and-play simplicity, rock-solid stability, and broad compatibility make it ideal for security, live streaming, or remote monitoring. Custom-built for reliability—essential for pro-grade wireless video solutions!