HDMI in MPEG4 H264 encoder Extender Via Web NMS Management Convert HDMI To DVB-T or ISDB-T Over Coaxial 1080P out Vcan1907
- Voltage: 12V
- Type: Digital
- High Definition: Yes
- RF output: DVB-T or ISDB-T
- LCN: Support
- Management/Upgrade: Web Control
- MER: Typ. 35dB
- RF range: 100~950MHz, 1KHz step
- RF output level: 100 dBμV (30dB Attenuation)
- Power supply: DC 12V 1A
- Dimensions: 104*74*26mm
- Weight: 211g
MPEG4/H.264 I Extender Via W-e-b NMS Management Convert HDMI To DVB-T Over Coaxial 1080P
IMPORTANT NOTE: Remark the type of adapter, US or EU.
Table of Contents
Intended use
This HDMI Extender is used to feed audio-video signals through the HDMI connector into a coaxial cable network.
Signals from surveillance cameras, media players, satellite receivers, or computers. The signal is RF-modulated
and available to any number of receivers (TV, set-top-box) over long distances.
Features
- Supports output resolutions up to 1080 60p
- Easy to set up and upgrade via Web NMS (default IP: 192.168.0.168.)
- Small size and Lightweight
- Support wall-mount type
- Good ventilation for the device
- Install multiple units onto your TV system
- Support 2U Rack Mount installed up to 14 units onto your TV system
Applications
- Monitor security cameras on domestic or communal TV systems
- Distribute HD images for high-impact video displays
- Add extra channels to multi-dwelling TV systems
- Information channels in hotels or public spaces

Specifications
|
Encoding Section-Video |
Stream/ Encoder |
Service provider/Network ID/ ONID/ TS ID/ Service ID /PMT PID/VPID/APID/PCR PID/ Network/Half FPS/FHD Output/Latency |
|||||
|
Encoding |
MPEG4 AVC/H.264 |
||||||
|
Interface |
HDMI*1 |
||||||
|
Resolution |
Input 720@50p,720@60p 1080@50i/p,1080@60i/p |
Output Max. 1080@60p |
Network |
IP Address/Subnet Mask/ Default Gateway/ MAC Address |
|||
|
Update |
Modulator Firmware/Main MCU |
||||||
|
Modulator Section |
|||||||
|
MER |
Typ. 35dB |
||||||
|
Bit rate |
Max.20Mbps |
RF range |
100-950MHz, 1KHz step |
||||
|
Encoding Section-Audio |
RF output level |
100 dBμV(30dB Attenuation) |
|||||
|
Encoding |
MPEG-1 Layer2, AAC |
Standard |
DVB-T or ISDB-T |
||||
|
Sample rate |
48KHz |
Constellation |
QPSK, 16QAM, 64QAM |
||||
|
System |
Code rate |
1/2, 2/3, 3/4, 5/6, 7/8 |
|||||
|
Management |
Ethernet |
Guard interval |
1/4, 1/8, 1/16, 1/32 |
||||
|
Language |
English |
Mode |
1 |
2 |
3 |
||
|
Upgrade |
Ethernet |
Time Interleave |
I=4,8,16 |
I=2,4,8 |
I=1,2,4 |
||
|
Menu Configuration |
General |
||||||
|
General |
Frequency/ RF Attenuation/ Service Name/Modulation/ Remote Key ID |
Power supply |
DC 12V1A |
||||
|
Dimensions |
104*74*26mm |
||||||
|
Weight |
211g |
||||||
Package Contents
1. Encoder*1pc
2. Power supply *1pc
Pictures



HDMI in MPEG4 H264 encoder Extender
Shipping Policy
Important: Brazil Customers please leave your CPF after placing an order
Cause this is a free shipping order, the seller has the right to choose the most convenient courier from FEDEX/ DHL/ TNT/ UPS/ EMS.
No matter what buyers choose what kind of express delivery.

FAQ
Q1: Would you like to offer the user manual for this HDMI input encoder to ISDB-T RF output?
A1: Please check the user manual here. https://ivcan.com/wp-content/uploads/2023/08/1907-Manual-HDMI-input-to-ISDB-T-RF-output.pdf
Please check the leaflet here. https://ivcan.com/wp-content/uploads/2023/08/1907-Leaflet-HDMI-encoder-input-to-ISDB-T-RF-output.pdf
Q2: While setting up the virtual channel on your device, we found it connecting to the transmitter instead of the configured channel.

A2: Please download the upgrade firmware of the ISDB-T encoder transmitter. 【This software is intended for upgrades for specific customers. The customer has provided their hardware and software versions. If you encounter any technical issues, please send us your hardware and software versions first so that we can verify them. We will then provide a tailored software solution if necessary. Please do not download or upgrade on your own without confirmation.】
https://drive.google.com/file/d/1AUwAqgi-2PukqcUtXU_Myvf1IDAfVoSD/view?usp=sharing
FAQs
Thanks for your inquiry about our ISDB-T modulator.
We are from a China factory, so the price is cheaper, The product is located in the factory, we don't have a shop in Peru now. if you need it, I will send it to your hand by DHL or UPS.
Yes















Reviews
There are no reviews yet.