80KM wireless transmitter-receiver
80KM wireless transmitter-receiver Video Data RC Transmission System HDMI SDI long-range low latency Vcan1702
Table of Contents
Overview
This model designed for the drone, It is a kind of wireless FHD video and data transmission system. It has the advantages of small size, low power consumption and long-distance. The system can transmit FHD video, flight control data, gimbal control data, and RC control data simultaneously. With the H.265 video CODEC and OFDM modulation technology, it can achieve low latency, high-resolution video transmission.
With advanced radio frequency technology, it can support two frequency bands. Users can change frequency bands easily. Users can choose a suitable frequency band according to local regulations. Also, you can choose frequency hopping or fixed mode under special conditions.
We can configure the air unit to Point-to-Point mode or Repeater mode. Users only need one more air unit and a simple configuration to achieve long-distance transmission. Please watch the instruction video for more information.
It has an encryption function. Users can Enable/Disable this function when needed. It is easy to set an encryption code using Maestro Assistant or Web UI.
The device has 2 UART—UART1 and UART2. Two protocols, Mavlink and Transparent, are supported. Users can use it for flight control data and gimbal control data transmission. Also, the system can improve the RC control distance via the SBUS port. On the ground unit, there is a USB 3.0 port. Users can add a USB storage device to save the FHD video.It supports a variety of video input and output interfaces, such as HDMI, Ethernet, SDI, CVBS. It can also match most gimbal on the market.
This is a highly integrated data transmission system that has RC, data link, and video link built inside. It has an 80km distance to support it. The frequency and power of the 80km wireless data RC transmission system can be set through software according to your needs. It supports 2 frequency ranges: 800Mhz (806~825); and 1.4G(1430~1444). This Video Data RC transmission system supports HDMI input, and HDMI/Ethernet port output, video resolution is 1080p @60/50/30.
Feature
- Lightweight
- Low power consumption
- Long-distance
- Low latency
- Which is suitable for UAV and other data/video/radio transmission applications
Specification
- Transmitter Video-Input: HDMI / CVBS / SDI
- Receiver Video Output: HDMI/ Ethernet port
- Transmitter Data Input: UART/SBUS/CAN
- Receiver Data Output: UART/SBUS
Parameter
| Category | Item | Detail | |
| Wireless
Performance |
Frequency band | 800MHz/1.4GHz | |
| Frequency
range |
800MHz：806MHz～825MHz
1.4GHz：1427MHz～1447MHz |
||
| Bandwidth | 3MHz / 5MHz / 10MHz / 20MHz | ||
| Modulation | OFDM | ||
| EIRP | 33dBm±1dB | ||
| Sensitivity | ≤-95dBm | ||
| Range | 80km (we test the distance under the condition of no interference and LOS. ) | ||
| Bit rate | 30Mbps@20MHz | ||
| Power Range | DC 9~28V | ||
| Power consumption | ≤10W | ||
| Interface | Antenna | SMA *2 | |
| Power | XT60 | ||
| UART | TTL 3.3V，1 start bit, 8 data bit, 1 stop bit, no parity., Baud rate 115200（default）， 57600, 38400, 19200, 9600. | ||
| UART1 and UART2 | |||
| SBUS | SBUS_IN | ||
| SBUS_OUT | |||
| Ethernet | RJ45 | ||
| 4Pin | |||
| 7Pin（With +12V Output) | |||
| Button | 1 | ||
| Switch | For air and ground switch | ||
| Antenna | Interface | SMA | |
| Type | Air: Glue stick antenna 20cm
Ground: Directional antenna, 120cm |
||
| Polarization | Vertical | ||
| type | ||
| Gain | Air：2.5dBi
Ground：12dBi |
|
| SWR | ≤2.0 | |
| Environment | Work
temperature |
-40℃～+70℃ |
| Storage
temperature |
-40℃～+85℃ | |
| Humidity | 5~95%，non-condensing | |
| Appearance | Size | 112 X 63.5 X 21 mm |
| weight | 170g |
Package
1x Transmitter for Long Range Video/Data/RC Transmitter
1x Receiver for Long Range HD Video/Data/RC Receiver
2x Transmitter Antenna
2x Receiver Antenna
2x Power/UART Cable
4x Antenna Feeder
FAQ
Question: We have planes with SIYI Radio. We want to make an 80km range drone. Can your 80km wireless drone video transmitter and receiver work on my RC plane?
Answer: Our device has two RJ45 IP ports for the camera. There are three data serial ports, I don’t know if you have these interfaces on your radio, Or you can show us more pictures of the SIYI.
You can connect it as long as it is a network port, serial port, or SBUS interface. It means that you have to see if there are these interfaces first. You have to figure out how to structurally fasten our transceiver and your remote control together.
Our recommendation is the model below
Sandro –
The anti-jamming capabilities and frequency agility ensure secure data transmission even in contested environments. Used in our border patrol systems, it’s proven indispensable for encrypted reconnaissance missions.