SDL550 two-way broadband wireless transmission link equipment

SDL550 two-way broadband wireless transmission link equipment

• Two-way broadband wireless transmission link equipment，The highest code rate can reach 30Mbps,Suitable for wireless video and broadband data transmission。
• Air-to-ground wireless transmission distance up to 150km，Transmission distance 1~10km under ground-to-ground line-of-sight conditions。
• Provide 2 wireless transparent transmission Ethernet ports、3Wireless transparent transmission RS232 serial port、Two-way audio transmission function。
• Dual antenna：The main antenna works in TDD transceiver mode，Auxiliary antenna works in receive mode。
• Wireless transmission power：10W。
• Support peer-to-peer、point-to-multipoint、relay、Mesh ad hoc network(Customized version)and other communication methods。
• Configuration management and real-time monitoring of wireless connection status can be performed through Web UI。
• Size 124*67.8*28.5mm，Weight 250g。

SDL550 two-way broadband wireless transmission link equipment works in the 800MHz frequency band or 1.4GHz frequency band(Determined when shipping according to customer needs)，Wireless transmission power 10W，Suitable for long-distance wireless video transmission applications。

Technical specifications：

• TDD OFDM modulation and demodulation，QPSK/16QAM/64QAM system adaptive selection。
• Working frequency band：800MHz frequency band(806~826HMz)or 1.4GHz band(1428~1448MHz)。
• Support automatic frequency hopping within the frequency band。
• 3/5/10/20MHz wireless bandwidth configurable。
• Maximum wireless air interface transmission rate 30MBps，Asymmetric transmission in uplink and downlink。
• Wireless transmission power: 10W。
• Receive sensitivity: -108dBm(1Mbps)。
• Business data Ethernet port IP transparent transmission mode(Provide 2 network ports to the outside world，internal bridge mode)。
• 3RS232 data serial port。
• Air-to-ground wireless transmission distance up to 150km，Transmission distance 1~10km under ground-to-ground line-of-sight conditions。
• Configuration management and real-time monitoring of wireless connection status can be performed through Web UI。
• AES128 encryption and decryption
• Asymmetric uplink and downlink transmission rates，Configurable uplink and downlink transmission rate ratio。
• Support networking mode：peer to peer、point-to-multipoint(Star networking)、relay、Mesh wireless ad hoc network(Firmware customized version)。
• Support node movement：Supports movement speed of at least 120km/h。
• CNC metal shell design，Small size、light weight、Good heat dissipation、Reduce wireless signal crosstalk。
• powered by：DC24~30V,The maximum average power consumption of the video transmitter is less than 1.4A@28V，The maximum average power consumption of the video receiving end is less than 0.36A@28V
• Overall machine size: 124*67.8*28.5mm(This dimension does not include connectors protruding from the device housing, etc.)。
• weight: 250gram

interface signal

SDL550 networking application

    Long-distance two-way wireless data communication can be achieved using SDL550 module，Point-to-point two-way communication possible，Point-to-multipoint star networking can also be used for two-way communication. ，As well as relay and wireless ad hoc network Mesh methods(Custom firmware)Two-way communication。During point-to-multipoint communication，If communication is required between two access nodes, it must be relayed through the central node，Each node is in the same wireless LAN，All access nodes communicate with the central node and share the wireless working bandwidth，The module will automatically distribute the system speed evenly。Data transmission in the direction from the central node to the access node is called downlink，Data transmission in the direction from the access node to the central node is called the uplink.。When communicating point-to-point or point-to-multipoint，Downlink and uplink share wireless operating bandwidth。When the module is shipped，The default setting is the ratio of uplink rate to downlink rate = 4:1。therefore，If the module is used to transmit IP Camera video data，The IP camera should be connected to the access node。The module will automatically and dynamically adjust the wireless transmission rate according to the business data stream carried.，When the amount of business data carried is smaller,，Under the same conditions, the transmission distance will be farther。therefore，When using the device to transmit IP Camera video data，You can increase the wireless transmission distance by appropriately reducing the IP Camera video encoding bit rate.。

peer-to-peer communication：

Star networking：

Relay mode：

Mesh wireless ad hoc network(Customized version)：