SUE2 H.264 compression coding module

• Low-latency H.264 audio and video encoding，Maximum support for 1080P@60 real-time video encoding
• Support HDMI or AV audio and video input for H.264 compression encoding
• Support network port docking IP Camera to COFDM wireless transmission，Can be connected to multiple IP cameras at the same time

Function Description：

• SUE2 board implements H.264 compression coding，Maximum support for 1080P@60fps encoding，Backward compatible with various other resolutions、frame rate encoding；
• Audio and video input interface：
  • HDMI input(HDMI Type A socket)
  • AV in and Audio in(3.5mm headphone socket)
  • Ethernet port(Can be connected to multiple IP cameras)
• SUE2 board video input system support：
  • HDMI：1080 60P、1080 50P、1080 30P、1080 25P、1080 60I、1080 50I、1080 30I、720 60P、720 50P、720 30P、……，Various modes of adaptation
  • AV: 720×480 60I(NTSC)、720×576 50I(PAL)，mode adaptation
• Encoded video stream output interface：Ethernet signal in FPC Connector
• One-way transparent data transmission serial port(FPC_CON interface)
• control serial port(FPC_CON interface)
• Micro USB interface(For software programming、upgrade maintenance etc.)
• COFDM transmit interface(Power, 2PIN Phoenix terminal interface)
• Size 70x45mm(COFDM transmit interface)
• SUE2 PCB board thickness 1.2mm，The highest point of the front device is less than 7mm，The highest point of the device on the back is less than 2.5mm
• COFDM transmit interface：7V ~ 24V

SUE2 board application matching：

1) The SUE2 board can be stacked and assembled with COFDM modulation modules such as RCA or RCB，Form COFDM transmitters with different functions，The connection interface is FPC_Main(26PIN flat cable flexible cable interface)。

2) SUE2 can be stacked together with SUE-Hat1 expansion board，Connect through FPC_CON interface flexible cable，Provide external RS232 parameter configuration serial port、RS232 transparent data transmission serial port、6PIN Ethernet port。

SUE-Hat1 size 45x18mm，Two of the screw holes can be connected to the leftmost two screw holes of SUE2。SUE-Hat1 converts the two TTL serial ports in the FPC-CON interface of SUE2 into RS232 interfaces，One in the form of a Micro USB physical interface，for parameter configuration，Can be connected to SconB parameter configuration panel(As shown below)。Another RS232 interface is used for transparent data transmission，Maximum transmission baud rate 115200bps。SUE-Hat1 also converts the USB signal in the FPC-CON interface of the SUE board to Ethernet signal，Provide external Ethernet communication interface。

3) SUE2 is combined with SUE-Hat1 expansion board and RCA or RCB stack，Composition interface with feature-rich coded transmitter。

• Application function A：HDMI high-definition audio and video input or AV standard definition audio and video input，COFDM transmission after H264 encoding。H264 encoding parameters can be configured through the serial port、COFDM modulation transmission parameters。In addition, one wireless transparent data transmission serial port is provided。
• Application function B：Connect multi-channel IP Camera through Ethernet port(Ethernet HUB is required to access multiple IP Cameras)，Transmit multi-channel IP Camera video data to the receiving end via COFDM wireless link，The receiving end is then connected to the NVR through the Ethernet port for multi-channel IP Camera video split display on the same screen。
• Application function C.：Simultaneous access to HDMI(or OFF)Video signal and IP Camera video signal，Transmitted to the receiving end via COFDM wireless link，Receiver HDMI(or OFF)Show one of the videos，The other video stream is then connected to the NVR through the Ethernet port for multi-channel video split display on the same screen。