IP -Mesh 100mbit / s Wireless Video -Daten Transceiver 2x5w PA 16 hüpfen

Eigenschaften

1. It not only supports point-to-point networking, but also supports mesh decentralized networks.
2. It can support network speeds up to 100Mbps.
3. The three network RJ45 ports can connect to three different network devices at the same time.
4. One data serial port (RS232 or TTL optional) and one control serial port. If more serial ports are needed, it can also support the serial port to network port UDP broadcast protocol.
5. Support transparent transmission*.
6. Dual antenna: Primary and Secondary antenna, Dual Transmit and Dual Receive mode (2T2R),
7. Supports CA (carrier aggregation) and MIMO mode
8. Drahtloses Arbeitsfrequenzband: 566~678MHz, 1420~1530 MHz
9. Supports automatic frequency hopping within the frequency band. (Dieses Modell wurde für die drahtlose Video- und Datenübertragung mit einer drahtlosen Zwei-Wege-Datenverbindung entwickelt)
10. Frequency range supports up to 110Mhz.
11. Default built-in 2X5Watts amplifier (2X2W, 2X10 optional)
12. Support AES128 encryption and decryption.
13. Parameter Configured by Network port Web UI or the control serial port.
14. DC 24~28V power supply.

Transparente Übertragung

Transparent transmission refers to a communication mode where data is transmitted and received without modification, interpretation, or additional processing by the wireless transceiver. The transceiver simply acts as a relay, passing the data between devices as-is, ensuring that the original data structure and format remain unchanged.

Mesh Networking Type

Mesh networking is a type of network topology where multiple devices, or nodes, are interconnected to create a decentralized communication system. Unlike traditional networks that rely on a single central node or access node, mesh networks distribute connections among nodes, allowing them to relay data dynamically.

Support max 16 hops or 32 Hopfen. (optional)

Weight and Size

Full Set

FAQ

Q1: Is it possible to configure one RF port for transmitting only and another for receiving only?

A1: The main antenna can be set to transmit and receive, and the secondary antenna can be set to receive only, not transmit, by turning off the CA and MiMo modes, but this will reduce the code stream by half!

Q2: What encryption algorithms does the transmitter support?

A2: SCHNEE3G, AES, ZUC.

Relativer Beitrag

1. Benötigen Sie ein wasserdichtes Gehäuse, staubdicht, und beschlagfrei?
2. Mesh Radios AT-Befehlshandbuch