SHD4 Video Decoder Board

— H.264 video decoder, high definition output up to 1920*1080@60
— Ethernet input, HDMI+AV output
— Audio codec with audio output
— Video record with a Micro SD card or USB disk
— Web UI or uart for management
— The normal video latency is about 200ms when paired with encoder module
— Support proprietary H.264 video decompression only used p-frames for lowest latency as 50ms to 130ms

SHD4 video decoder board implements H.264 video decoding and audio codec, the video stream input via Ethernet is decoded and sent to display via HDMI and AV interface. The SHD4 decoder board features a range of comprehensive signal outputs including an HD video at 1080P/720P, down-converted HD CVBS monitor video, and two analog audios supported. SHD4 board includes DVR record functionality with a Micro SD card or USB disk using record switch controls. Additionally, the SHD4 board supports a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders(option). This board is in compact size and suitable for embedded applications and real-time live video monitoring via wireless link or Ethernet.

Specification:

IO

HD video output	HDMI type A connector
Composite video output	6PIN PH2.0mm connector
Audio output	Embedded HDMI and 6PIN PH2.0mm connector
Power in	2PIN PH2.54mm connector
USB Host	4PIN PH2.0mm connector
Keys+LEDs	Extension port for assembling keys and LEDs on necessary
3.3V TTL data uart	3PIN PH1.25mm connector
3.3V TTL control uart	4PIN PH1.25mm connector
TF-Card	TF-Card slot
Ethernet	6PIN PH2.0mm connector

Video and Audio

Video output	HDMI and CVBS
Video formats	1080P or 720P 720*480 60I(NTSC), 720*576 50I(PAL)
Video Decoding	H.264
Audio output	Embedded HDMI and Analog audio
Audio Decoding	AAC
Decryption	AES256
Storage	USB disk or micro SD card
Ethernet stream protocol	Support UDP TS stream decoding, RTSP client decoding, RTSP server forward

Monitoring and control
Setup via Web UI or control uart.

Temperature range
Full specification: 0° to +70°C Ambient(Optional: -40° to +85°C)
Storage: –40° to +85°C

Power requirements
Input range: 9~30VDC
Power consumption: <250mA@12V

Physical Characteristics
Dimensions: 80.4 * 50.8mm(not including connectors out of the board)
PCB thickness: 1.2mm, the maximum height of up components less than 7mm, the maximum height of bottom less than 2.5mm.
Weight:27.3g