H264 COFDM Receiver Module

 – 160MHz~860MHz HD video COFDM receiver module with HDMI/AV/Ethernet/USB output
    – H.264 video decoder

This COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, suitable for use in fluid and high-mobility applications. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios is supported.

The receiver module also includes DVR record functionality with Micro SD card or USB disk. Additionally, the receiver module has a built-in RTSP sever that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like Smart phone or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.

When paired with the COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.

• COFDM demodulation and H.264 video decoder
• Full HD resolution, 1080P@60fps
• Great security by AES decryption
• DVR record with Micro SD card or USB disk
• Built-in RTSP server enables video streaming over Ethernet
• Enables video streaming over USB host for remote device
• Supports display characters string on the video display screen in OSD mode
• Stable signal transfer in NLOS and high speed moving
• Adjustable working frequency, band width

Paired with COFDM transmitter

This module can also be paired with SUE5&RCB transmitter module(or SUE5SA&RCB module) for lowest video latency application when manufactured with specified firmware. The specified firmware enable proprietary H.264 video compression/decompression only used p-frames for lowest latency. The video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 50ms to 130ms.

IO

HD Video output	HDMI type “A” Connector
Composite video output	6PIN PH2.0mm connector
Audio output	Embedded HDMI and 6PIN PH2.0mm connector
RF input	Two SMA female
Power in	2PIN PH2.54mm Connector
USB Host	4PIN PH2.0mm Connector
Data uart	3PIN PH1.25mm Connector, TTL 3.3V
control uart	4PIN PH1.25mm Connector, TTL 3.3V
TF-Card	TF-Card slot
Ethernet	6PIN PH2.0mm Connector
Keys&LEDs	2*5PIN PH2.0mm connector

Video and Audio

Video output	HDMI and CVBS, Ethernet, USB
Video formats	1080P or 720P 720*480 60I(NTSC), 720*576 50I(PAL)
Video Decoding	H.264
Audio output	Embedded HDMI and AV audio
Audio decoding	AAC
Storage	USB disk or TF-Card
Decryption	AES256

Demodulation

Demodulation Formats	COFDM(DVB-T)
Carriers	2K
Bandwidth	Configurable from 1MHz to 8MHz, step by 1KHz
FEC	1/2, 2/3, 3/4, 5/6, 7/8(lock automatically according to the transmitter)
Guard interval	1/32, 1/16, 1/8, 1/4(lock automatically according to the transmitter)
Constellation	QPSK, 16QAM, 64QAM(lock automatically according to the transmitter)
Bitrates	0.5Mbps to 31.67Mbps(according to the transmitter)

RF

Frequency Bands	Selectable from 160MHz~860MHz
Tuning Step size	1KHz
Sensitivity	-97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) for one channel and add 3dBm for two channel

Monitoring and control
Comprehensive receiver setup with Config Panel or Windows PC via Control UART.

Temperature range
Full specification: 0° to +70°C Ambient
Storage: –40° to +80°C

Power requirements
Input range: 9~24VDC
Power consumption: <300mA@12V

Physical Characteristics
Board dimensions: 80.4*50.8mm