– 160Moduł odbiornika wideo HD COFDM MHz ~ 860 MHz z wyjściem HDMI/AV/Ethernet/USB
– Dekoder wideo H.264
This COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, suitable for use in fluid and high-mobility applications. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios is supported.
The receiver module also includes DVR record functionality with Micro SD card or USB disk. Dodatkowo, the receiver module has a built-in RTSP sever that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like Smart phone or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.
- COFDM demodulation and H.264 video decoder
- Rozdzielczość Full HD, 1080P@60fps
- Great security by AES decryption
- DVR record with Micro SD card or USB disk
- Built-in RTSP server enables video streaming over Ethernet
- Enables video streaming over USB host for remote device
- Supports display characters string on the video display screen in OSD mode
- Stabilny transfer sygnału w NLOS i poruszanie się z dużą prędkością
- Regulowana częstotliwość pracy, przepustowość łącza
Paired with COFDM transmitter
This module can also be paired with SUE5&RCB transmitter module(or SUE5SA&RCB module) for lowest video latency application when manufactured with specified firmware. The specified firmware enable proprietary H.264 video compression/decompression only used p-frames for lowest latency. Opóźnienie wideo od momentu wejścia nadajnika do wyświetlenia ekranu HDMI odbiornika wynosi około 50 ms do 130 ms.
IO
| HD Video output | HDMI type “A” Connector |
| Composite video output | 6Złącze PIN PH2,0mm |
| Wyjście audio | Embedded HDMI and 6PIN PH2.0mm connector |
| Wejście RF | Dwie samice SMA |
| Włącz zasilanie | 2Złącze PIN PH2,54 mm |
| Host USB | 4Złącze PIN PH2,0 mm |
| Uart danych | 3Złącze PIN PH1,25 mm, TTL 3,3 V |
| steruj uartem | 4Złącze PIN PH1,25 mm, TTL 3,3 V |
| Karta TF | Gniazdo karty TF |
| Ethernet | 6Złącze PIN PH2,0 mm |
| Klawiatura&diody LED | 2*5Złącze PIN PH2,0mm |
Wideo i dźwięk
| Wyjście wideo | HDMI i CVBS, Ethernet, USB |
| Formaty wideo | 1080P lub 720P 720*480 60I(NTSC), 720*576 50I(KUMPEL) |
| Dekodowanie wideo | H.264 |
| Wyjście audio | Wbudowane audio HDMI i AV |
| Dekodowanie dźwięku | AAC |
| Składowanie | USB disk or TF-Card |
| Odszyfrowanie | AES256 |
Demodulacja
| Demodulation Formats | COFDM(DVB-T) |
| Przewoźnicy | 2K |
| Pasmo | Możliwość konfiguracji w zakresie od 1 MHz do 8 MHz, krok co 1 kHz |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8(lock automatically according to the transmitter) |
| Interwał ochronny | 1/32, 1/16, 1/8, 1/4(lock automatically according to the transmitter) |
| Konstelacja | QPSK, 16QAM, 64QAM(lock automatically according to the transmitter) |
| Szybkość transmisji | 0.5Mb/s do 31,67 Mb/s(according to the transmitter) |
RF
| Pasma częstotliwości | Selectable from 160MHz~860MHz |
| Rozmiar kroku strojenia | 1kHz |
| Wrażliwość | -97±1dBm(BW=8 MHz, QPSK, CR=2/3, IG=1/16) dla jednego kanału i dodaj 3dBm dla dwóch kanałów |
Monitorowanie i kontrola
Comprehensive receiver setup with Config Panel or Windows PC via Control UART.
Zakres temperatur
Pełna specyfikacja: 0° do +70°C otoczenia
Składowanie: –40° do +80°C
Wymagania dotyczące zasilania
Zakres wejściowy: 9~24VDC
Zużycie energii: <300mA przy 12 V
Charakterystyka fizyczna
Board dimensions: 80.4*50.8mm
Zadać pytanie
Twoja wiadomość została wysłana