Drone Detection Module User Manual

Drone Detection Module User Manual

Version: v2.1

2025/4/22 

Copyright © 2014-2025 Shenzhen Anpu Information Technology Co., Ltd. reserves all rights. Without the written permission of our company, no unit or individual may excerpt or copy part or all of the contents of this document without authorization, and may not disseminate it in any form. The information in this document may be changed without prior notice.

1 Introduction

The drone detection module developed by Shenzhen Anpu Information Technology Co., Ltd. can be used to detect common civilian drones including quad-rotors, fixed-wings,DIY, drones, etc., with a very low false alarm rate. At the same time, the detection module is small in size, low in power consumption, can work in a wide temperature range, and adapt to outdoor environments. The detection module provides a serial port,GPIO And other communication alarm methods, easy for users to integrate.

2 HardwareOur company currently provides a variety of drone detection modules for customers to choose from.

2.1 TNC246AL v1.2

TNC246ALIt is a small module with a module size of41x54mm, providing multiple independent adoption1.25mmInterface, useMMCX Interface for connecting antenna.

TNC246ALWith maximum40MHz The bandwidth can quickly analyze the received data, improving the analysis speed and accuracy.TNC246ALIt has the characteristics of high receiving sensitivity and low background noise, and can detect weak signals at farther distances.TNC246ALCan launch2.5~40MHz The hardware supports the detection frequency range of:430MHz~750MHz ，820MHz~1.98GHz ，3.2GHz~4.6GHz ，2.24GHz~2.74GHz， 4.63GHz~6.19GHz。 

The supply voltage range is:3.8-30V。

3 Control Panel Usage

Users can choose to use our control panel solution to develop it according to the structural needs, or they can useAT Serial port self-developed control board. This chapter will introduce our control board solutionTNX246AL Use of.

3.1 Button FunctionThe expansion board supports six buttons by default, and the function definitions are as follows:Table 3–1 Button Definition

Function

confirm

return

Control forward

Control Backward

Volume increase

Volume Down

Button DescriptionOK 

Back （R） Left Switch interface function options Right Switch interface function options + (optional) – (optional)

3.1.1 Power on function buttonBefore turning on the device, press and hold the button on the top of the device to turn it on, or you can connect it to the power supply through the Typc-c interface.

3.2 Screen ContentThe screen is divided into three interface states, defined as follows:

Interface Description

Welcome screen is displayed when the computer is started, and a customized startup screen can be displayed.

Main interface Displays status information and alarm information. Menu interface Enter through the main interface to configure device parameters.

3.3 Menu FunctionTable 3–2Menu functions

Item Description

Language selection Currently only supports English. Volume adjustment You can adjust the volume from 0 to 10, where 0 is mute and 10 is the maximum volume. Backlight brightness adjustment You can adjust the screen backlight brightness from 0 to 5, where 0 is no backlight and 5 is the maximum.LEDLight switch On Controls whether to use the LED light. Vibration intensity adjustment Adjusts the vibration intensity from 0 to 3. 0 means no vibration and 3 means the maximum. Detection sensitivity selection Adjusts the detection sensitivity from 1 to 5. 1 means the least false alarms and 5 means the strongest detection. Detection frequency band selection Selects the detection frequency band range. (Can only be configured after fully powered on.)

Restore Default Configuration Restore to default configuration. Device Information Display device version, serial number and other information.