RCA Video Splitter Distribution Video Signal Booster Video Amplifier for Car DVD Distribution RCA A-100
Price range: $18.90 through $28.90
Shipping by China Post
RCA Video splitter
RCA Video Splitter Distribution Video Signal Booster Video Amplifier for Car DVD Distribution RCA Splitter A-100
Table of Contents
Introduction
1 to 3 Car Channel RCA Video Signal Booster and Splitter For 12V, this is a composite video splitter amplifier inside for one input and three outputs. It supports one-player video sources to connect more screens like headrests or roof mount monitors. The yellow connect is an RCA video signal splitter input and output connector.
Selling Points
1 input to 5X output
One input to 5 output
Without any Signal / Quality Loss
Description
Product condition: Brand New
Dimensions: 43 * 50 * 23 mm
Video input level: 2.0 Vpp
Power supply voltage: 12V (24V is optional)
Output level: 0.5~1.5Vpp
Output impedance: 75 ohm
The material of the case: Plastic Box
Feature
It’s easy to install;
With one RCA video input
With five RCA video outputs
Sharing the same car AV source at the same time
Compact design for easy mounting
Allows the connection of up to 5 monitors to a single video source
Good for signal transmission
Ideal for any in-dash monitors, car roof monitors, headrests monitor installation
Power Supply: 12V
For example, one DVD player, over 40pcs headrest monitor in a bus, two Sun-visor monitors, the roof mount monitor, and the armrest monitor.
Compact Design for Easy Installation
The compact and attractive design with a slim body makes this video signal booster easy to install in your vehicles.
Only has a 1/5 size compared with other video signal boosters.
Strong Video Signal Transmission
5 ways to output the head unit video to other monitors
- Output the head unit video signal to the two headrests directly, the video signal on both headrests is fuzzy.
- Output the head unit video signal to one of the headrests and the headrest video is fuzzy, and then output the first headrest video to the other one, it will be fuzzier than the first headrest.
- Output the head unit video signal to the two headrests, the video signal on them is as vivid and clear as the head unit.
With a video signal booster, there is no signal loss in the process of transmission, therefore, you can enjoy the same vivid and beautiful videos on all the monitors.
FAQs
Yes, we can modify it for you, please check the below picture.
We can also make one cvbs composite video input and five video outputs, all with female connectors, as shown in the image below.
Yes, we will modify it for you if really need it.
Yes, we can modify our RCA CVBS Composite Video splitter to meet your requirement. Please check the below picture.
Question: I have an application, that I believe there's an issue with the video signal being too weak, the camera is 1080P NTSC 30 FPS and I need to split that into two devices (LCD and Dashcam) but when there's 2 running there's some interference, will this device work with 1080P Camera's?
Answer: Sorry, our RCA video splitter only supports composite RCA CVBS video sources. It does not support HDMI signals. Maybe you need an HDMI splitter device?
Question: I need some help with getting all the screens in my car to play the same video at the same time. I wanted the two headrests and the front screen to show the same thing at the same time.
Answer: The operation steps are as follows:
- Please connect the video input port of our CVBS video splitter to the video output of your DVD player. There is a No.6 Video Output in your picture.
- Connect the two video outputs of our video splitter to the video inputs on your monitor.
- Just power on the video splitter.
- Or see out test video at YouTube. https://youtu.be/IPykkTnh92M
Nylon shell PA66
Product Description: Flip-top snap-on type, no screws required for fastening
Appearance size: length*width*height=42*42*26mn
Material Material: Nylon PA66
Spot color: black
Operating temperature: -25°C~+85°C
Technical characteristics: Insertion and extraction force: 3-20N Life span: 5000 times
No. But you can use three existing a-100 to expand it.
How to connect it to our headrest or sun visor monitor?
Please check the operation video at the YouTube.
Related Keywords
RCA Video Splitter
RCA Splitter
Video Booster
Car Video Splitter
1 RCA Male to 5 RCA Y Splitter
Video Amplifier
RCA Distribution Splitter
1 to 5 Car Channel RCA Video Signal Booster and Splitter For 12V
A-100 Splitter Amplifier Video splitter/amplification video signal with a video input within 5 video outputs. Universal use with RCA inputs/outputs.
1 to 5 Channels Ways Video Signal Amplifier Booster Splitter Cable Distribution. Car Video Amplifiers. Custom Fit Car Stereo. Car Backup Cameras. Car Safety & Security. Car Stereo Installation. Car Headrest Players.
30pcs Package Dimension: 36*20*10CM
30pcs Package Gross Weight:3KG
1 review for RCA Video Splitter Distribution Video Signal Booster Video Amplifier for Car DVD Distribution RCA A-100
Add a review
You must be logged in to post a review.
RCA Video Splitter Distribution Video Signal Booster Video Amplifier for Car DVD Distribution RCA A-100
Price range: $18.90 through $28.90
Shipping by China Post
RCA Video splitter
RCA Video Splitter Distribution Video Signal Booster Video Amplifier for Car DVD Distribution RCA Splitter A-100
Introduction
1 to 3 Car Channel RCA Video Signal Booster and Splitter For 12V, this is a composite video splitter amplifier inside for one input and three outputs. It supports one-player video sources to connect more screens like headrests or roof mount monitors. The yellow connect is an RCA video signal splitter input and output connector.
Selling Points
1 input to 5X output
One input to 5 output
Without any Signal / Quality Loss
Description
Product condition: Brand New
Dimensions: 43 * 50 * 23 mm
Video input level: 2.0 Vpp
Power supply voltage: 12V (24V is optional)
Output level: 0.5~1.5Vpp
Output impedance: 75 ohm
The material of the case: Plastic Box
Feature
It’s easy to install;
With one RCA video input
With five RCA video outputs
Sharing the same car AV source at the same time
Compact design for easy mounting
Allows the connection of up to 5 monitors to a single video source
Good for signal transmission
Ideal for any in-dash monitors, car roof monitors, headrests monitor installation
Power Supply: 12V
For example, one DVD player, over 40pcs headrest monitor in a bus, two Sun-visor monitors, the roof mount monitor, and the armrest monitor.
Compact Design for Easy Installation
The compact and attractive design with a slim body makes this video signal booster easy to install in your vehicles.
Only has a 1/5 size compared with other video signal boosters.
Strong Video Signal Transmission
5 ways to output the head unit video to other monitors
- Output the head unit video signal to the two headrests directly, the video signal on both headrests is fuzzy.
- Output the head unit video signal to one of the headrests and the headrest video is fuzzy, and then output the first headrest video to the other one, it will be fuzzier than the first headrest.
- Output the head unit video signal to the two headrests, the video signal on them is as vivid and clear as the head unit.
With a video signal booster, there is no signal loss in the process of transmission, therefore, you can enjoy the same vivid and beautiful videos on all the monitors.
FAQs
Yes, we can modify it for you, please check the below picture.
We can also make one cvbs composite video input and five video outputs, all with female connectors, as shown in the image below.
Yes, we will modify it for you if really need it.
Yes, we can modify our RCA CVBS Composite Video splitter to meet your requirement. Please check the below picture.
Question: I have an application, that I believe there's an issue with the video signal being too weak, the camera is 1080P NTSC 30 FPS and I need to split that into two devices (LCD and Dashcam) but when there's 2 running there's some interference, will this device work with 1080P Camera's?
Answer: Sorry, our RCA video splitter only supports composite RCA CVBS video sources. It does not support HDMI signals. Maybe you need an HDMI splitter device?
Question: I need some help with getting all the screens in my car to play the same video at the same time. I wanted the two headrests and the front screen to show the same thing at the same time.
Answer: The operation steps are as follows:
- Please connect the video input port of our CVBS video splitter to the video output of your DVD player. There is a No.6 Video Output in your picture.
- Connect the two video outputs of our video splitter to the video inputs on your monitor.
- Just power on the video splitter.
- Or see out test video at YouTube. https://youtu.be/IPykkTnh92M
Nylon shell PA66
Product Description: Flip-top snap-on type, no screws required for fastening
Appearance size: length*width*height=42*42*26mn
Material Material: Nylon PA66
Spot color: black
Operating temperature: -25°C~+85°C
Technical characteristics: Insertion and extraction force: 3-20N Life span: 5000 times
No. But you can use three existing a-100 to expand it.
How to connect it to our headrest or sun visor monitor?
Please check the operation video at the YouTube.
Related Keywords
RCA Video Splitter
RCA Splitter
Video Booster
Car Video Splitter
1 RCA Male to 5 RCA Y Splitter
Video Amplifier
RCA Distribution Splitter
1 to 5 Car Channel RCA Video Signal Booster and Splitter For 12V
A-100 Splitter Amplifier Video splitter/amplification video signal with a video input within 5 video outputs. Universal use with RCA inputs/outputs.
1 to 5 Channels Ways Video Signal Amplifier Booster Splitter Cable Distribution. Car Video Amplifiers. Custom Fit Car Stereo. Car Backup Cameras. Car Safety & Security. Car Stereo Installation. Car Headrest Players.
30pcs Package Dimension: 36*20*10CM
30pcs Package Gross Weight:3KG
1 review for RCA Video Splitter Distribution Video Signal Booster Video Amplifier for Car DVD Distribution RCA A-100
-
Hello VCAN, ich habe gekauft die video splitter und es hat keine verstärker, nur eine eingang 75 ohms terminierd, und 5 ausgange 75 ohms terminierd keine VERSTARKER nur buffert, eine 1 zu 1 eingang ausgang. wo is die verstarker, —————- I bought the video splitter and it has no amplifier, only one input 75 Ohms terminierd, and 5 outputs 75 Ohms terminierd only buffert no amplifier a 1 to 1 Input Output, 5 channels. where is the amplifier there is no increase in video level no AMPLIFER. information, Thanks! Yours truly. R. J. Walker
Add a review
You must be logged in to post a review.
RCA composite CVBS Video Splitter 1 video input, 3-5 video output, in-Car Channel RCA Video Signal Booster and Splitter For 12V A-100, the connector of the video input or o output can be customized. We used stronger power IC chipset, when the power supply is over 30V in the car or the truck, it will stop to work to protect the pcba, it will be working well if the power supply is slow down under 30V.
RCA Video Splitter with strong video signal booster
Or buy it at https://vc48.com/p/video-splitter/
R. J. Malcolm Walker, Esq. –
Hello VCAN, ich habe gekauft die video splitter und es hat keine verstärker, nur eine eingang 75 ohms terminierd, und 5 ausgange 75 ohms terminierd keine VERSTARKER nur buffert, eine 1 zu 1 eingang ausgang. wo is die verstarker, —————- I bought the video splitter and it has no amplifier, only one input 75 Ohms terminierd, and 5 outputs 75 Ohms terminierd only buffert no amplifier a 1 to 1 Input Output, 5 channels. where is the amplifier there is no increase in video level no AMPLIFER. information, Thanks! Yours truly. R. J. Walker