COFDM RF Frequency Down Converter BDC
Table of Contents
Customized Frequency
Q1: Can you make a frequency down converter from 2400Mhz to 410Mhz？
A1: Yes, please check the below specification.
https://ivcan.com/wp-content/uploads/Frequency-Down-Converter-2400-410Mhz.pdf
| Items | Specification |
| input frequency | 2400 MHz |
| output frequency | 410 MHz |
| Local Frequency | 1990 MHz |
| Noise Figure | ≤1.5dB |
| gain | 25 dB |
| Carrier leakage | ≤-20dBm |
| Belt unevenness(8MHz) | ≤1.5dB |
| IIP3: | ≥15dBm |
| maximum input level | -10dBm |
| VSWR | ≤1.5 |
| operation temperature | -10～+60℃ |
| voltage current | ≤12V/450mA |
| RF Interface | SMA-50KFD |
| size | 81*48*15mm |
| Power supply mode | Socket power supply |
Q2: Can you make a frequency down converter from 3500Mhz to 500Mhz （3200~3800Mhz to 200~800Mhz）？
A2: Yes, we can customize it for you.
3200~3800Mhz to 200~800Mhz Frequency Down Converter Specification
| Items | Specification |
| input frequency | 3200 MHz ～3800 MHz |
| output frequency | 200 MHz ～800 MHz |
| Local Frequency | 3000 MHz |
| Noise Figure | ≤1.5dB |
| gain | 25 dB |
| Carrier leakage | ≤-20dBm |
| Belt unevenness(8MHz) | ≤1.5dB |
| IIP3: | ≥15dBm |
| maximum input level | -10dBm |
| VSWR | ≤1.5 |
| operation temperature | -10～+60℃ |
| voltage current | ≤12V/450mA(Input connector energized) |
| RF Interface | N-50KFD |
| size | 81*48*15mm |
| Power supply mode | Socket power supply |
Dimension
FAQ
Q: Is it possible to convert the DC supply through the same coaxial cable LMR 400
A: Yes, we can customize it for you.
Q: Can you make a frequency UP / Down Converter with a UART port where we can change the LO?
We want to shift up 750-1050 to 3100-3300 and we also wish to have the opportunity to change LO to shift up 750-1050 to 3500-3800 or 4100-4400 and up to 4600-4900 for example
A: Most of the time, the LO is fixed. If you want to test a trial sample with adjustable LO, we can also do the sample for you.
If it’s a fixed Lo, we can test it and take a video for you, and you won’t have a problem using it. If it is adjustable, we can also reserve this interface, but if it is easy to fail by the user modifying the LO, the engineer is a little worried at this point.
BDC is a block down converter. L-band up converters, down converters, and block converters, covering a frequency range of 200MHz to 3.8GHz.
Q: Can you make the frequency down converter in this frequency range? From 5750-5950Mhz to 200-400Mhz?
Down Converter: RF in 5750-5950 MHZ IF out 200-400 MHZ Local oscillator 5550 MHZ
A: We can not do it. The oscillator frequency 5550Mhz is too high, our max is 4200M.
kanak –
We integrated this into our drone video transmission system, and the results are phenomenal! The device handles interference effortlessly and maintains crystal-clear output even in challenging environments. A must-have for critical operations!