Conversor descendente de frequência RF COFDM BDC FDC
Table of Contents
Frequência Personalizada
1º trimestre: Can you make a frequency down converter from 2400Mhz to 410Mhz？
A1: Sim, please check the below specification.
https://ivcan.com/wp-content/uploads/Frequency-Down-Converter-2400-410Mhz.pdf
| Unid | Specification |
| frequência de entrada | 2400 MHz |
| frequência de saída | 410 MHz |
| Local Frequency | 1990 MHz |
| Figura de ruído | ≤1,5dB |
| ganho | 25 dB |
| Vazamento de transportador | ≤-20dBm |
| Desigualdade da correia(8MHz) | ≤1,5dB |
| IP3: | ≥15dBm |
| nível máximo de entrada | -10dBm |
| ROE | ≤1,5 |
| temperatura de operação | -10～+60℃ |
| corrente de tensão | ≤12V/450mA |
| Interface RF | SMA-50KFD |
| tamanho | 81*48*15mm |
| Modo de fonte de alimentação | Fonte de alimentação do soquete |
2º trimestre: Can you make a frequency down converter from 3500Mhz to 500Mhz （3200~3800Mhz to 200~800Mhz）？
A2: Sim, podemos personalizá-lo para você.
3200~3800Mhz to 200~800Mhz Frequency Down Converter Specification
| Unid | Specification |
| frequência de entrada | 3200 MHz ～3800 MHz |
| frequência de saída | 200 MHz ～800 MHz |
| Local Frequency | 3000 MHz |
| Figura de ruído | ≤1,5dB |
| ganho | 25 dB |
| Vazamento de transportador | ≤-20dBm |
| Desigualdade da correia(8MHz) | ≤1,5dB |
| IP3: | ≥15dBm |
| nível máximo de entrada | -10dBm |
| ROE | ≤1,5 |
| temperatura de operação | -10～+60℃ |
| corrente de tensão | ≤12V/450mA(Input connector energized) |
| Interface RF | N-50KFD |
| tamanho | 81*48*15mm |
| Modo de fonte de alimentação | Fonte de alimentação do soquete |
Dimensão
FAQ
P: Is it possible to convert the DC supply through the same coaxial cable LMR 400
A: Sim, podemos personalizá-lo para você.
P: Can you make a frequency UP / Down Converter with a UART port where we can change the LO?
We want to shift up 750-1050 para 3100-3300 and we also wish to have the opportunity to change LO to shift up 750-1050 para 3500-3800 ou 4100-4400 e até 4600-4900 por exemplo
A: Most of the time, the LO is fixed. If you want to test a trial sample with adjustable LO, we can also do the sample for you.
If it’s a fixed Lo, we can test it and take a video for you, and you won’t have a problem using it. If it is adjustable, we can also reserve this interface, but if it is easy to fail by the user modifying the LO, the engineer is a little worried at this point.
BDC is a block down converter. L-band up converters, down converters, and block converters, covering a frequency range of 200MHz to 3.8GHz.
P: Can you make the frequency down converter in this frequency range? From 5750-5950Mhz to 200-400Mhz?
Conversor para baixo: RF em 5750-5950 MHZ IF out 200-400 MHZ Local oscillator 5550 MHZ
A: We can not do it. The oscillator frequency 5550Mhz is too high, our max is 4200M.
kanak –
We integrated this into our drone video transmission system, and the results are phenomenal! The device handles interference effortlessly and maintains crystal-clear output even in challenging environments. A must-have for critical operations!