How to add relay between drone transmitter and receiver

The customer has purchased our drone video data transmitter (air unit) and receiver (ground unit). In order to extend the distance and avoid obstacles, he wants to add a repeater and asks us how to operate it. We use TX900 as an example.

The customer did not request to add a repeater when placing the order, so the default configuration is.

	Air Unit	Ground Unit
IP Address	192.168.1.12	192.168.1.11
Device Type	Access Node	Central Node
TDD Configruation		1D4U

We need to use the original ground receiving unit 192.168.1.11 as a relay, change the long antenna to a short antenna on the relay, add a new ground unit 192.168.1.13, connect it to the original long antenna, and configure it as follows.

	Air Unit	Relay / Repeater	Ground Unit
IP Address	192.168.1.12	192.168.1.11	192.168.1.13
Device Type	Access Node	Central Node	Access Node
TDD Configruation		2D3U

Notes:

1. Access node does not need to set the TDD configuration. (also can not modify the TDD configuration.)