Filter

wireless data transceiver transmitter receiver radio telemetry

Industrial Data Transmission Radio Telemetry for UAV drone long-range 1-10-30-50-100-150km

Name: Industrial data transmission radio 2023 Best
SKU: VCAN1888
Availability: InStock

$0.00

SKU: VCAN1888 Category: Wireless Data Transmission

Industrial Data Transmission Radio Telemetry for UAV drone long-range 1-10-30-50-100-150km

Vcan1888 is a TDMA chip with high sensitivity, super resistance to multipath interference, and automatic frequency hopping. The default configuration of this product is a built-in one-watt power amplifier. If you want to pursue a longer range, you need to change it to a 10-watt power amplifier. (Vcan1878)

Table of Contents

Introduction

Vcan1888 is a frequency hopping radio in the 902-928mhz frequency band, which can support point-to-point, point-to-multi-point, and AD hoc network communication modules. It has the characteristics of high integration, low power consumption, and ultra-long distance. It suits UAV clusters, robot communication, industrial automation, new energy systems, etc.

Feature

1. Working frequency 902~928MHz

2. Outputpower1W-10W

3. Support automatic relay and AD hoc network

4. Transparent transmission, low delay maximum speedup to 276kbps

5. Easy to integrate

long-range wireless data transmitter and receiver radio telemetry for uav drone

Vcan1888 series
Description Working frequency Modulation Spread spectrum TX power Transmission Distance Work mode Transmission Rate Data interface Control interface Antenna interface Voltage range System power consumption LWH Working temperature	1888-30-IPEX 902~928MHz 2FSK FHSS 1W air-to-ground 60KM P2P, P2MP, Mesh 57.6kbps~276.4kbps TTL TTL IPEX DC3.3V <10W 33mmx26.5mmx3.5mm -40~+70°	1888-MINI-DT01 902~928MHz 2FSK FHSS 1W air-to-ground 60KM P2P, P2MP, Mesh 57.6kbps~276.4kbp GH1.25-4PIN none SMA female head DC7V-26V <10W 53mmx40mx13mm -40C~+70	1888-MINI-DT02 902~928MHz 2FSK FHSS 1W air-to-ground 60KM P2P, P2MP, Mesh 57.6kbps~276.4kbps Type C to USB none SMA female head USB 5V 10W 53mmx40mmx13mm -40°C~+70°C

FAQs

1. Does your telemetry radio support connecting the Mavlink and Sbus both?

Our 2X UART wireless transceiver supports changing 2X TTL and 2X RS232 in the metal box.
If you need to have one TTL and one RS232, we have to set it to both RS232 and add one extra board to support the RS232 ⇄ SBus converter board.

2. I can not change the Master or Slave mode using PC configuration software, how to do it?

The mini data transmission can be forced into configuration mode by pressing and holding the SET key and powering on. The baud rate is forced to 9600.