Wireless Video transmission receiver Omni Fiberglass Antenna
Wireless Video transmission receiver Omni Fiberglass Antenna long-distance omnidirectional Antenna Outdoor Long Range IP67 SMA FRP
595Mhz the length is 1.8 Meters
Table of Contents
The length is adjustable according to the customized frequency.
1.8 Meter package details:
Gross Weight 1.5kg
Package dimension: 186 * 8 * 8 cm
Volume Weight: 2.5KG
We can customize the frequency of the antenna according to customer requirements. There may be slight differences in the length and gain of the antenna for different frequencies. The following is the specification of the antenna customized according to the customer’s requirements of 280 ~ 300Mhz.
| 类别 Category | 全向天线Omni Antennas |
| 型号 Model | 912T-RTX |
| 频率范围 Frequency Range-MHz | 280-300Mhz |
| 宽带 Bandwidth-MHz | 14 |
| 增益 Gain-dBi | 6 |
| 垂直面波瓣宽度 Vertical Beamwidth | 17 |
| 电压驻波比 VSWR | ≤1.5（频点Center Frequency ≤1.2） |
| 标称阻抗 Nominal Impedance-Ω | 50 |
| 极化方式 Polarization | 垂直
Vertical |
| 最大功率 Maximum Power-W | 100 |
| 长度 Length-meter | 1.8 |
| 重量 Weight-kg | 2.0 |
| 抗风强度 Rated Wind Velocity-m/s | 60 |
| 接头型号 Connector | SL16或N座 UHF or N Female |
| 备注 Remarks | 玻璃钢 FRP Fiberglass Antenna |
Download PDF specification
FAQ
Question: Can you customize a 10dBi FRP antenna for 120 cm length at 664 Mhz?
Answer:
- If the frequency is 2.4 Ghz and 120 cm in length, then it can have 10dBi.
- For 664Mhz and 120 cm length, then the gain can not reach 10dBi, only 6dBi.
- If you really need 664Mhz and 10dBi, then the antenna length should be 380cm, two parts, and fixed together.
- The length of the antenna determines the gain. If it marked the length of the antenna you bought as 10dbi, it must be a false gain mark.
- 664 MHz ±10 frequency band, 120cm fiberglass, with 1.5m extension cable with U-shaped mounting clip.
Question: Can you make it center frequency at 433Mhz +-10 MHz and Gain at 5dBI?
Answer: Yes, the length should be 120cm.
Q: Is the feeder cable RG58 type of TX900?
A: 1.5 meter SYV50-5 cable, RF connector N female to SMA male.
Q: Do we have to do an antenna SWR tuning?
Standing Wave Ratio. It is used to make sure that the best antenna impedance matches the maximum RF power transferred to the antenna. Using SWR meter.
Reviews
There are no reviews yet.