56110MHz-7210MHz 6-7 GHz FPV VTX 3 Watts Power Amplifier 6.1-7.2GHz 5WPA Transmitter
Table of Contents
Appearance


Dimension

Specification
- 7.2 GHz, 64 frequency points: 6110 MHz – 7210 MHz;
- Maximum power: 5W (25mW/1000mW/5000mW, adjustable);
- Input voltage: DC 15V-36V, supports 2-8S battery input 4. Antenna interface: SMA female socket 5. Communication protocol: IRC Tramp
- Heat dissipation method: aluminum alloy heat sink + fan
- Mounting hole: 20mm*20mm /ø2mm
- Product size: 53mm x 28.85mm x 16mm
- Product weight: 25.85g
Interface and button LED layout

- Frequency indicator: Red LED
- Band indicator: Blue LED
- Power indicator: Green LED
- Band and frequency adjustment button
- Power adjustment button
- 1.0 6P cable holder
- SMA female antenna socket
Button Control Method and LED Indicator Definition
Button ④ switches between frequency points and frequency bands. Each time you briefly press button ④, the corresponding red LED will flash, switching from one frequency point to the next. This cycle repeats; see the figure below for details.
| CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | |
| Red LED | Blink 1 time | Blink 2 time | Blink 3 time | Blink 4 time | Blink 5 time | Blink 6 time | Blink 7 time |
Blink 8 time |
Press and hold button ④ to switch frequency bands. Press and hold for 5 seconds and the corresponding blue LED will flash.
Frequency group A.B.E.F.R.P.H.U. This operation can be cyclic; see the figure below for details!
| Blink 1 time | Blink 2 time | Blink 3 time | Blink 4 time | Blink 5 time | Blink 6 time | Blink 7 time | Blink 8 time | |
| Blue LED | A | B | E | F | R | P | H |
U |
Button ⑤ is the power adjustment button. Each short press cycles through the three power settings: 25mW, 1000mW, and 3000mW. The green LED is the power indicator, as shown in the figure below: 25mW flashes once, 1000mW flashes twice, and 3000mW flashes three times. Press and hold for 3 seconds to enter pit mode, where the green light remains on. See the figure below for details.
| Constantly on | Blink 1 times | Blink 2 times | Blink 3 times | |
| Green Led | PIT Mode | 25mW | 1000mW |
3000mW |
Note: This video / image transmitter has a temperature protection function. When the temperature of the image transmitter is higher than 100℃,, the image transmission power will be reduced by one level. If the temperature is still higher than 100When the temperature drops to 95℃, the transmit power will return to the originally set power level.
Channel Corresponding Parameter Table

6P 1.0 Cable Interface Definition

Precautions for use
- When installing the image transmission module, be sure to leave enough space around it to ensure adequate air circulation and heat dissipation. Otherwise, the module’s overheat protection will activate, reducing or even shutting down the transmission power.
- Before connecting the power cord, ensure the correct voltage range and polarity to avoid damaging the components.
- Before connecting the power supply, it is recommended to ensure that the antenna is installed at the RF output terminal to extend the service life of the module.
- Please read the instructions before use to ensure correct wiring and extend the service life of the module.
Customizable Items for FPV VTX:
-
Frequency Range – Adjustable working bands (for example 1.2GHz / 2.4GHz / 5.8GHz / 6.7GHz, 7.2GHz) to meet regional regulations or application needs.
-
Output Power – Different RF power levels (25mW, 200mW, 600mW, 1W, 2W, 3W, 5W, etc.) for short- or long-distance transmission.
-
Modulation Type – Analog or Digital (COFDM, DVB-T, custom protocols).
-
Video Interface – HDMI, SDI, CVBS, or IP stream input.
-
Audio/Data Channel – Additional audio input or telemetry data channel.
-
Form Factor & Size – Board type, enclosed module, or lightweight compact version for UAVs and drones.
-
Power Supply Range – Wide voltage input (e.g., 7–24V, 12V, 28V) depending on system requirements.
-
Antenna Connector – Custom RF connectors such as SMA, RP-SMA, MMCX, or custom cable.
-
Encryption – Optional AES or proprietary encryption for secure transmission.
-
Cooling Method – Passive heatsink or active fan cooling depending on power output.
-
Channel Number & Switching – Fixed channels, DIP switch, or software control for frequency selection.
-
Housing & Protection – Waterproof, dustproof, or ruggedized case for outdoor/military use.
-
Logo & Firmware – OEM/ODM branding and firmware customization.


User Manual
VTX: 7.2G 5W VTX Manual
VRX: 6G7 64CH VRX BOX
Gallery




7GHz FPV VRX receiver
7GHz FPV VTX transmitter
FAQ
1. What is the frequency range of the 6110MHz-7210MHz FPV VTX 5W Power Amplifier?
The amplifier operates in the 6110MHz–7210MHz range, covering the 6–7 GHz FPV frequency band, offering 64 selectable channels.
2. How much output power does this FPV VTX amplifier provide?
It supports three adjustable power levels: 25mW, 1000mW, and up to 5000mW (5W) maximum output.
3. Can I adjust the transmission power of this 6-7 GHz FPV VTX?
Yes, the power amplifier allows switching between 25mW, 1000mW, and 5000mW via the control button.
4. What type of antenna connector does this FPV VTX power amplifier use?
It uses a standard SMA female connector, compatible with most FPV antennas.
5. Does the 6-7 GHz FPV VTX amplifier support pit mode?
Yes, by holding the power button, it enters pit mode for safe indoor or bench testing.
6. What is the input voltage range for the FPV VTX 3W amplifier?
It accepts DC 15V–36V, supporting 2S–8S LiPo batteries, making it highly versatile.
7. How heavy is the 6110MHz-7210MHz FPV VTX 5W Power Amplifier?
It weighs only 25.85 grams, making it lightweight for drones and FPV aircraft.
8. What are the physical dimensions of this FPV video transmitter?
The size is 53mm x 28.85mm x 16mm, compact for mounting on most FPV builds.
9. What cooling system does the 6-7 GHz FPV VTX power amplifier use?
It features an aluminum alloy heat sink and an active cooling fan for reliable heat dissipation.
10. Does this FPV VTX amplifier have overheating protection?
Yes, it automatically reduces output power if the temperature exceeds 100°C, and restores when it cools below 95°C.
11. Which communication protocol is supported by the FPV VTX amplifier?
It supports the IRC Tramp protocol for remote control and easy VTX configuration.
12. Is this 6-7 GHz FPV transmitter suitable for long-range FPV flights?
Yes, with up to 3W output power, it is ideal for long-distance FPV and drone video transmission.
13. How do I change frequency channels on this FPV VTX?
Press the frequency button to cycle through channels; the red LED blinks to indicate the channel number.
14. How do I switch frequency bands on this FPV VTX 5W power amplifier?
Hold the frequency button for 5 seconds; the blue LED indicates the selected band.
15. How many frequency bands are supported in the 6110-7210MHz FPV VTX?
It supports 8 bands (A, B, E, F, R, P, H, U) with multiple channel options.
16. How many total channels does the FPV VTX support?
There are 64 frequency points, ensuring flexibility and interference avoidance.
17. Is this FPV VTX amplifier compatible with standard FPV goggles and receivers?
Yes, it works with most 6-7 GHz FPV receivers that support the same frequency range.
18. Can I use this FPV VTX with digital FPV systems?
It is primarily designed for analog FPV transmission, not digital systems like DJI O3.
19. What is the maximum power consumption of the FPV VTX amplifier?
At full 3W output, it consumes more power, so using a reliable 2S–8S battery is recommended.
20. Does the FPV VTX include an antenna in the package?
Usually, the amplifier includes only the module; compatible 6-7 GHz SMA antennas must be purchased separately.
21. How do I know what power level is currently set?
The green LED flashes: once for 25mW, twice for 1000mW, and three times for 5000mW.
22. What happens if I power the FPV VTX without an antenna?
Operating without an antenna may damage the amplifier; always connect an antenna before powering on.
23. Can the FPV VTX amplifier be mounted on racing drones?
Yes, with its 20x20mm mounting holes, it is compatible with racing drone frames.
24. Is the FPV VTX amplifier lightweight enough for fixed-wing aircraft?
Yes, its 26g weight makes it perfect for airplanes, long-range wings, and UAVs.
25. Can this VTX amplifier be controlled through flight controllers?
Yes, via IRC Tramp protocol, flight controllers like Betaflight can change VTX settings.
26. What is pit mode in FPV transmitters?
Pit mode reduces output power to near-zero for safe bench testing without interference.
27. Can this 6-7 GHz VTX be used for FPV racing events?
Yes, with multiple channels and bands, it can be used in multi-pilot FPV events.
28. Is there an LED indicator for each function on the VTX?
Yes, red for frequency, blue for band, green for power.
29. What type of cable interface does the FPV amplifier use?
It uses a 6-pin 1.0 cable for control and connection.
30. What is the recommended installation method for this FPV VTX?
Mount with adequate airflow, leaving space for cooling and heat dissipation.
31. Can I power this FPV amplifier directly from a drone battery?
Yes, it supports 2S to 8S LiPo batteries, making it very convenient.
32. Does this FPV VTX amplifier work in high-temperature environments?
Yes, but if it exceeds 100°C, the power automatically steps down to protect the device.
33. Is the 6-7 GHz frequency legal in all countries?
No, always check your local radio regulations before using this frequency band.
34. Can this FPV transmitter be used for professional UAV video streaming?
Yes, with 5W power output, it is suitable for long-range UAV and industrial FPV applications.
35. How durable is the aluminum housing?
The metal heat sink casing improves durability and provides efficient cooling.
36. Can the VTX be used with ground station receivers?
Yes, as long as the receiver supports 6110–7210MHz frequencies.
37. Does this FPV VTX amplifier come pre-configured?
It ships with default settings, but you can adjust frequency, band, and power manually.
38. How easy is it to change settings on this FPV transmitter?
Very easy – just press the buttons and check the LED indicators for feedback.
39. Can I switch bands and channels while flying?
No, it is not recommended to change the frequency or channel during flight.
When the VTX switches to a different frequency, the video signal will be interrupted for about 1–2 seconds, causing the image to black out or lose signal. The receiver (VRX) cannot automatically follow this change, so the video link will be completely disconnected.
For safety reasons, please set and confirm the correct frequency and channel before takeoff. Changing the frequency is only suitable for ground testing or multi-pilot frequency coordination before flight.
40. What is the minimum safe operating voltage?
The amplifier should not be powered below 15V DC.
41. Does the FPV VTX amplifier support smart audio?
No, it supports IRC Tramp protocol instead of SmartAudio.
42. Can this FPV VTX be used in urban environments?
Yes, its high power output helps overcome interference in urban FPV flying.
43. Is the fan noisy during operation?
The built-in cooling fan runs quietly while keeping the amplifier cool.
44. Can this module be used for FPV drones beyond line of sight (BLOS)?
Yes, with 3W power, it is capable of long-range transmission.
45. What precautions should I take before using the FPV VTX amplifier?
Ensure correct wiring, attach the antenna, and provide proper cooling before powering on.
46. Is this FPV VTX waterproof or weatherproof?
No, avoid exposure to rain or moisture; mount it in a protected area.
47. How reliable is the signal stability at 7 GHz?
The amplifier provides strong, stable FPV video transmission even in high-frequency bands.
48. Can the FPV VTX be upgraded with firmware?
Currently, it is a hardware-based device with no firmware upgrade requirement.
49. Does the amplifier interfere with GPS signals?
No, operating at 6–7 GHz, it does not interfere with standard GPS bands (1.5 GHz).
50. Why should I choose the 6110MHz-7210MHz 6-7 GHz FPV VTX 5W amplifier?
Because it offers high power, reliable long-range transmission, efficient cooling, multiple frequency options, and compatibility with modern FPV systems.
51. Do you have the Video Transmitter THOR T67 FPV VTX and Receiver THOR R67 FPV Receiver?
No, do you agree with this model to replace? Same support 6-7GHz frequency.




iVcan.com –
I’ve been using the 6110MHz-7210MHz 6-7 GHz FPV VTX 3W Power Amplifier for my long-range FPV setup, and the performance is outstanding. The signal is extremely stable, even in challenging environments, and the adjustable power levels give me great flexibility. The build quality feels solid, and the cooling system with the aluminum heat sink and fan works perfectly to prevent overheating. Setup was straightforward thanks to the clear LED indicators and simple button controls. Overall, this amplifier delivers reliable, high-quality transmission and has greatly improved my flying experience. Highly recommended for serious FPV enthusiasts!