10dBi 1.8m high gain fiberglass omnidirectional antenna suitable for ground receivers 180cm

10dBi 1.8m high gain fiberglass omnidirectional antenna suitable for ground receivers 180cm

Customizable Options

1. Frequency Range – Can be designed to operate on different bands (e.g., VHF, UHF, 300–1000 MHz, 1–2 GHz, etc.).

2. Gain Level – While standard is 10 dBi, higher or lower gain versions can be customized depending on application needs.

3. Antenna Height/Length – Standard 1.8 m, but can be shortened or extended for specific coverage or portability requirements.

4. Connector Type – Options include N-type, SMA, MCX, or custom connectors for compatibility with your equipment.

5. Mounting Options – Pole mount, wall mount, or tripod mount can be tailored to your installation setup.

6. Cable Type and Length – Choice of coaxial cable type (RG58, LMR400, etc.) and customized lengths.

7. Environmental Protection / IP Rating – Options for weatherproofing, UV-resistant coating, or full IP65/IP67 sealing for harsh environments.

8. Color / Finish – Standard is white or grey, but can be painted or coated to match aesthetics or reduce visual impact.

9. Polarization – Standard vertical polarization, but horizontal or dual-polarization can be offered if needed.

10. Packaging / Shipping Customization – Custom packaging for safe transport or for bulk orders.

FAQ

Question: I would like to place an order for this antenna. What parameters do I need to tell you?

Answer:

Thanks for your interest in a 900 MHz high-gain fiberglass omnidirectional antenna (10 dBi, 1.8 m / 180 cm).
To recommend the correct model, could you confirm a few details?

1. Frequency range required

• Common ISM options: 902–928 MHz (US/Canada), 915–928 MHz (AU/NZ), 868–870 MHz (EU), or a custom band (please specify exact MHz).

• Please check your radio/device spec and tell us the operating range so the antenna matches it.

2. Connector & feed: N-female default—OK? If not, specify (N-male, TNC, SMA, etc.).

3. Polarization: Vertical by default—any special requirements?

4. Mounting: pole/pipe diameter and mounting location (rooftop, mast, vehicle base, etc.).

5. Cable: Required jumper type/length (e.g., LMR-400, 5 m).

6. Environment: Outdoor conditions (temperature range, wind rating, salt-spray/corrosion).

7. Compliance/region: Country of use (to ensure regulatory band alignment).

8. Power & VSWR: Any minimum spec? (Typical: ≤1.5 VSWR, 100 W max input.)

9. Accessories: Lightning arrester or surge protector needed?

Once we have the frequency range (e.g., 902–928 MHz), we’ll quote the matching 10 dBi, 1.8 m fiberglass omni with datasheet and lead time.