熱成像區域測溫攝影機和可見光攝影機雙光消防監控

特徵

1. High sensitivity infrared camera
2. High-definition HD visible camera
3. It can be used for temperature detection in various places
4. Area Intrusion Detection, Cross-Border Detection, High Temperature Object Detection
5. Multi-zone temperature measurement mode is supported
6. IP67保護
7. Used for long-distance human body temperature detection 1m~4m
8. 相機 + embedded motherboard + black body integrated structure, smaller size and lighter weight
9. 無需電腦, HDMI standard video signal output, directly connected to the monitor
10. Automatic correction, no fear of the impact of ambient temperature changes on thermal imaging
11. Accurate forehead temperature algorithm measurement, filtering background high temperature impact
12. Support mask recognition, abnormal body temperature, instant reminder alarm 9 Real-time capture Optional network server Connect to the cloud for data analysis

規範

Visible camera
解析度	4 百萬像素
Image sensors	GC4653 1/3”
Imaging devices	CMOS
Infrared camera
檢測器類型	Vanadium oxide uncooled detector
解析度	384*288 high sensitivity detector, support contrast adjustment
鏡片	3.8mm or 6.2mm or 10mm
溫度測量範圍	0 ℃-550 ℃
測溫精度	± 2°C or ±2% of reading, whichever is maximum
Operating bands	8～14 um
NETD	≤60mK （F/1,300K, 50Hz）
幀率	50赫茲
Other parameters
工作溫度	-20℃~80℃
接口	RJ45
安裝環境	Indoor or outdoor
安裝:	Brackets, wall mounting, hoisting

常問問題

Q1: Does your thermal + day light dual lens camera work well with 1.4g communication system support rc link for controlling the drone in real-time too?

A1: 是, it is working well with our TX900, 1.4Ghz wireless video data RC link.

Q2: What is the default IP address of the camera?
A2: The default IP address of the dual lens thermal imaging camera is 192.168.1.185.

Q3: What are the default login credentials for the camera?
A3:

• 使用者名稱: 行政

• 密碼: 123456

Q4: How do I log in to the camera’s web interface?
A4: Connect the camera and your computer to the same network, ensure your computer is in the same IP subnet, then open a web browser and enter HTTP://192.168.1.185. 和 HTTP://192.168.1.168.Log in using the default username and password.

Q5: Can the IP address and password be changed?
A5: 是. 登入後, you can modify the network settings and change the password through the camera’s web management interface. It is recommended to change the default password for security purposes.

Q6: After changing the device IP to my home network, why is the daylight (可見光) video missing while the thermal video still works?
A6: This model has a built-in visible light IPC (網絡攝像機) in addition to the thermal camera. When you change the main device IP address, the visible light IPC IP address must also be updated accordingly. If the IPs are not in the same network segment, the daylight video will not display.

Q7: How can I restore the daylight (可見光) 視頻?
A7: Please follow these steps:

1. Modify the visible light IPC IP address so that it is in the 同一子網路 as the main device IP.

2. 輸入 correct visible light IPC IP address in the device’s Visible Light Settings 選單.

3. 確保 current visible light IP shown in the menu is in the same network segment as the device IP.

4. If your computer uses a fixed IP address, add an additional IP address to your network adapter that matches the device subnet to ensure proper communication.

Q8: Why does the thermal video still display normally?
A8: The thermal camera is integrated directly into the main device, so it is not affected by the visible light IPC network configuration. Only the visible light video depends on correct IPC IP settings.

Q9: What is the key point to avoid this issue in the future?
A9: Whenever you change the device IP address, always make sure that the visible light IPC IP, 該 device IP, 和 computer IP are all within the 同一網段.

Q10: Does this dual-sensor (熱成像 + 可見光) camera support PoE power supply? 如果是, what is the supported voltage (or PoE standard)? （PoE=Power over Ethernet）
A10: 支持的. Please indicate this requirement when placing the order, and we will add the accessory inside the unit accordingly.

OSD Menu in Video