Kamera termowizyjna do pomiaru temperatury obszaru i kamera światła widzialnego. Podwójne światło do monitorowania zapobiegania pożarom

Spis treści
Cecha
- High sensitivity infrared camera
- High-definition HD visible camera
- It can be used for temperature detection in various places
- Area Intrusion Detection, Cross-Border Detection, High Temperature Object Detection
- Multi-zone temperature measurement mode is supported
- Ochrona IP67
- Used for long-distance human body temperature detection 1m~4m
- Aparat fotograficzny + embedded motherboard + black body integrated structure, smaller size and lighter weight
- Nie wymaga komputera, HDMI standard video signal output, directly connected to the monitor
- Automatic correction, no fear of the impact of ambient temperature changes on thermal imaging
- Accurate forehead temperature algorithm measurement, filtering background high temperature impact
- Support mask recognition, abnormal body temperature, instant reminder alarm 9 Real-time capture Optional network server Connect to the cloud for data analysis

Specyfikacja
| Visible camera | |
| rozkład | 4 milion pikseli |
| Image sensors | GC4653 1/3” |
| Imaging devices | CMOS |
| Infrared camera | |
| Typ detektora | Vanadium oxide uncooled detector |
| rozkład | 384*288 high sensitivity detector, support contrast adjustment |
| obiektyw | 3.8mm or 6.2mm or 10mm |
| Zakres pomiaru temperatury | 0 ℃-550 ℃ |
| Dokładność pomiaru temperatury | ± 2°C or ±2% of reading, whichever is maximum |
| Operating bands | 8~14 um |
| NETD | ≤60mK (F/1,300K, 50Hz) |
| Częstotliwość wyświetlania klatek | 50Hz |
| Other parameters | |
| Temperatura robocza | -20℃ ~ 80 ℃ |
| berło | RJ45 |
| Środowisko instalacyjne | Indoor or outdoor |
| Instalacja: | Brackets, wall mounting, hoisting |







FAQ
Q1: Does your thermal + day light dual lens camera work well with 1.4g communication system support rc link for controlling the drone in real-time too?
A1: tak, it is working well with our TX900, 1.4Ghz wireless video data RC link.
Q2: What is the default IP address of the camera?
A2: The default IP address of the dual lens thermal imaging camera is 192.168.1.185.
Q3: What are the default login credentials for the camera?
A3:
-
Nazwa użytkownika: Admin
-
Hasło: 123456
Q4: How do I log in to the camera’s web interface?
A4: Connect the camera and your computer to the same network, ensure your computer is in the same IP subnet, then open a web browser and enter http://192.168.1.185. i http://192.168.1.168.Log in using the default username and password.
Pytanie 5: Can the IP address and password be changed?
A5: tak. Po zalogowaniu, you can modify the network settings and change the password through the camera’s web management interface. It is recommended to change the default password for security purposes.
Pytanie 6: After changing the device IP to my home network, why is the daylight (widzialne światło) video missing while the thermal video still works?
A6: This model has a built-in visible light IPC (kamera IP) in addition to the thermal camera. When you change the main device IP address, the visible light IPC IP address must also be updated accordingly. If the IPs are not in the same network segment, the daylight video will not display.
P7: How can I restore the daylight (widzialne światło) wideo?
A7: Please follow these steps:
-
Modify the visible light IPC IP address so that it is in the same subnet as the main device IP.
-
Wejdz do correct visible light IPC IP address in the device’s Visible Light Settings menu.
-
Upewnij się, że current visible light IP shown in the menu is in the same network segment as the device IP.
-
If your computer uses a fixed IP address, add an additional IP address to your network adapter that matches the device subnet to ensure proper communication.

Q8: Why does the thermal video still display normally?
A8: The thermal camera is integrated directly into the main device, so it is not affected by the visible light IPC network configuration. Only the visible light video depends on correct IPC IP settings.
Pytanie 9: What is the key point to avoid this issue in the future?
A9: Whenever you change the device IP address, always make sure that the visible light IPC IP, ten device IP, i computer IP are all within the same network segment.
Pytanie 10: Does this dual-sensor (Obrazowanie termiczne + widzialne światło) camera support PoE power supply? Jeśli tak, what is the supported voltage (or PoE standard)? (PoE=Power over Ethernet)
A10: Utrzymany. Please indicate this requirement when placing the order, and we will add the accessory inside the unit accordingly.
OSD Menu in Video



Albert –
Captures detailed thermal images, enabling precise identification of temperature variations across different areas.