كاميرا قياس درجة حرارة منطقة التصوير الحراري وكاميرا الضوء المرئي. ضوء مزدوج لمراقبة الوقاية من الحرائق

جدول المحتويات
ميزة
- كاميرا تعمل بالأشعة تحت الحمراء ذات حساسية عالية
- كاميرا مرئية عالية الوضوح HD
- ويمكن استخدامه للكشف عن درجة الحرارة في أماكن مختلفة
- كشف التسلل للمنطقة, الكشف عبر الحدود, كشف الأجسام ذات درجة الحرارة العالية
- يتم دعم وضع قياس درجة الحرارة متعدد المناطق
- حماية IP67
- يستخدم للكشف عن درجة حرارة جسم الإنسان لمسافات طويلة من 1 م إلى 4 م
- الة تصوير + اللوحة الأم المدمجة + هيكل متكامل للجسم الأسود, حجم أصغر وأخف وزنا
- لا حاجة للكمبيوتر, HDMI إخراج إشارة الفيديو القياسية, متصلة مباشرة بالشاشة
- التصحيح التلقائي, لا خوف من تأثير التغيرات في درجات الحرارة المحيطة على التصوير الحراري
- قياس دقيق لخوارزمية درجة حرارة الجبين, تصفية الخلفية تأثير ارتفاع درجة الحرارة
- دعم التعرف على القناع, درجة حرارة الجسم غير طبيعية, إنذار تذكير فوري 9 التقاط في الوقت الحقيقي خادم شبكة اختياري الاتصال بالسحابة لتحليل البيانات

تخصيص
| كاميرا مرئية | |
| القرار | 4 مليون بكسل |
| أجهزة استشعار الصورة | GC4653 1/3" |
| أجهزة التصوير | CMOS |
| كاميرا تعمل بالأشعة تحت الحمراء | |
| نوع الكاشف | كاشف أكسيد الفاناديوم غير المبرد |
| القرار | 384*288 كاشف حساسية عالية, دعم تعديل التباين |
| عدسة | 3.8ملم أو 6.2 ملم أو 10 ملم |
| نطاق قياس درجة الحرارة | 0 درجه مئوية-550 درجه مئوية |
| دقة قياس درجة الحرارة | ± 2 درجة مئوية أو ± 2% من القراءة, أيهما أقصى |
| نطاقات التشغيل | 8~14 واحد |
| NETD | ≥60 مللي كلفن (F/1,300 كلفن, 50هرتز) |
| معدل الإطار | 50هرتز |
| معلمات أخرى | |
| درجة حرارة التشغيل | -20درجه مئوية ~ 80 درجه مئوية |
| جهة تعامل | RJ45 |
| بيئة التثبيت | داخلي أو خارجي |
| التركيب: | بين قوسين, تركيب الجدار, رفع |







التعليمات
Q1: Does your thermal + day light dual lens camera work well with 1.4g communication system support rc link for controlling the drone in real-time too?
A1: نعم فعلا, it is working well with our TX900, 1.4Ghz wireless video data RC link.
Q2: What is the default IP address of the camera?
A2: The default IP address of the dual lens thermal imaging camera is 192.168.1.185.
Q3: What are the default login credentials for the camera?
A3:
-
اسم المستخدم: مشرف
-
كلمه السر: 123456
Q4: How do I log in to the camera’s web interface?
A4: Connect the camera and your computer to the same network, ensure your computer is in the same IP subnet, then open a web browser and enter HTTP://192.168.1.185. و HTTP://192.168.1.168.Log in using the default username and password.
س 5: Can the IP address and password be changed?
A5: نعم فعلا. بعد تسجيل الدخول, you can modify the network settings and change the password through the camera’s web management interface. It is recommended to change the default password for security purposes.
س 6: After changing the device IP to my home network, why is the daylight (ضوء مرئي) video missing while the thermal video still works?
أ 6: This model has a built-in visible light IPC (كاميرا IP) in addition to the thermal camera. When you change the main device IP address, the visible light IPC IP address must also be updated accordingly. If the IPs are not in the same network segment, the daylight video will not display.
Q7: How can I restore the daylight (ضوء مرئي) فيديو?
A7: Please follow these steps:
-
Modify the visible light IPC IP address so that it is in the same subnet as the main device IP.
-
دخول correct visible light IPC IP address in the device’s Visible Light Settings قائمة طعام.
-
تأكد من أن current visible light IP shown in the menu is in the same network segment as the device IP.
-
If your computer uses a fixed IP address, add an additional IP address to your network adapter that matches the device subnet to ensure proper communication.

Q8: Why does the thermal video still display normally?
A8: The thermal camera is integrated directly into the main device, so it is not affected by the visible light IPC network configuration. Only the visible light video depends on correct IPC IP settings.
س9: What is the key point to avoid this issue in the future?
A9: Whenever you change the device IP address, always make sure that the visible light IPC IP, ال device IP, و ال computer IP are all within the same network segment.
س10: Does this dual-sensor (التصوير الحراري + ضوء مرئي) camera support PoE power supply? اذا نعم, what is the supported voltage (or PoE standard)? (PoE=Power over Ethernet)
أ10: أيد. Please indicate this requirement when placing the order, and we will add the accessory inside the unit accordingly.
قائمة OSD في الفيديو



Albert –
Captures detailed thermal images, enabling precise identification of temperature variations across different areas.