30-milisekundowy Drone UAV HDMI Bezprzewodowy nadajnik wideo
Ultra-low-latency 30~40 millisecond UAV HDMI Wireless Video Transmitter Drone wireless transmission system for Drone Camera Vcan1729
The latency of a regular COFDM transmitter and receiver is 200-300 milisekund.
This wireless video transmitter and receiver system has a delay time of less than 30 milisekund.
Spis treści
Cecha
- wysoce zintegrowany, modułowa konstrukcja połączona
- Zastosuj technologię modulacji COFDM
- FPGA-based H.265 video compression technology
- Bardzo niskie opóźnienie wideo (opóźnienie systemu przesyłowego mniejsze niż 30 milisekund)
- Wszechstronna komunikacja, Nie boi się budowa ścian
- Szybka komunikacja między podróżami,
- Aluminiowa obudowa z radiatorem, odporny na wstrząsy i uderzenia
- Non-line-of-sight (NLOS) transmisja mobilna, z odległością nie mniejszą niż 20 kilometry w warunkach na linii wzroku
- Maksymalna prędkość ruchu może osiągnąć 600 km / godzinę (wymierzony)
- Dostępna pełna personalizacja
Podanie
- It is used for drones that fly at high speed and require a video quality of 1080P.
- This product was mainly used by public security and security inspection departments for technical reconnaissance and forensics.
- Broadcasting includes radio and television live broadcasts, sports broadcasts, serwis społecznościowy, i więcej.
- Nadaje się do mobilnej transmisji wysokiej jakości obrazów w czasie rzeczywistym w miastach, morze, mountain, i inne złożone środowiska.
Specyfikacja
UAV HDMI Wireless Video Transmitter
Tryb modulacji | COFDM |
Napięcie robocze | DC11V~DC18V |
Prąd roboczy | 1 Waty PA:≤1.7A DC12V; 2-Waty PA: ≤2.3A DC12V; 5-Waty PA: ≤3,0A DC12V |
Interfejs sterowania | Standardowy interfejs RS232, 8 Bity danych, 1 Stop Bit, Parzystość, Szybkość transmisji: 19200 |
Przejrzysty interfejs danych | Jednokierunkowa przezroczysta transmisja przez port szeregowy, 8 bity danych, 1 bit stopu, wspierać nieparzystości, parzystości, parzystość bezprzewodowa, szybkość transmisji: 1200, 2400, 4800, 9600, 19200, 38400, 57600,230400 |
Metoda szyfrowania | 128-bitowe szyfrowanie AES |
Modulation Mapping | QPSK (4QAM), 16QAM, 64QAM |
Forward Error Correction | 1/2 2/3 3/4 5/6 7/8 |
Straż Interval | 1/32 1/16 1/8 1/4 |
Numer przewoźnika | 2K |
Frequency Bandwidth | 2/3/4/5/6/7/8M regulowany |
Transmission Code Stream | 2000kbs ~ 20000 kbs regulowany |
Transmission Power Amplifier | 1 Waty, 2 Waty, 5 Waty, 10 Waty, 20 Waty (We can customize for you) |
Transmission Frequency | można dostosować na dowolnej częstotliwości, częstotliwość można regulować w sposób ciągły;, krok to 1 MHz |
Power Flatness | mniej niż 0,2 dB w paśmie 10 MHz |
Band Shoulder Ratio | stosunek jest lepszy niż -30dB, gdy moc wyjściowa wynosi 36dB |
Second-Harmonic | mniej niż -60Db |
WIĘCEJ | 32Db |
Wideo | 720 50P, 720 60P, 1080 24P, 1080 25P, 1080 30P, 1080 50P, 1080 60P |
High-Definition Input | HDMI 1080P |
Video Coding Format | Miękkie kodowanie H.265 oparte na FPGA |
Opóźnienie | opóźnienie systemu transmisji mniejsze niż 30ms, opóźnienie od końca do końca |
Metal | minimum, Przeciw powstawaniu rdzy, konstrukcja antywibracyjna |
Wymiar | 95*75*45mm |
Waga | 0.248kg |
UAV HDMI Wireless Video Receiver
- When the above toggle switch is turned to PC, the serial port data is output from the external red, white, and black three-wire connection, which can be connected to the computer; when it is turned to LCD, the serial port data is output to the LCD screen on the receiver.
- The toggle switch below is the power switch for the LCD screen that comes with the receiver.
ion mode | QPSK, 16QAM, 64QAM (opcjonalny) |
Forward Error Correction | 1/2, 2/3, 3/4, 5/6, 7/8 (opcjonalny) |
liczba przewoźników | 2k, |
okres ochronny | 1/32, 1/16, 1/8, 1/4 (opcjonalny) |
dekodowanie wideo | H.265 |
współczynnik proporcji | 4:3 16:9 |
obraz wideo | 1080P@60P, 50P, 50ja, 30P, |
napięcie robocze | AC220V/DC12V <0.9ZA |
Temperatura pracy | -20℃ ~ + 50 ℃ |
Rozmiar wyglądu | 480*260* 45 (1U podwozia) |
Device Weight | 0.466kg |
Akcesorium
Często zadawane pytania
Model ten charakteryzuje się najniższym opóźnieniem w przypadku bezprzewodowego nadajnika i odbiornika wideo drona.
Obsługuje najniższe opóźnienie wynoszące 28 milisekund. (Nie obejmuje czasu wyświetlania aparatu i monitora)
COFDM-912T, Wejście wideo CVBS RCA 720P, 200~400 milisekund.
COFDM-908T: wejście HDMI, 200~300 milisekund.
Vcan1729: wejście HDMI, 20~40 milisekund. nadaje się do drona.
Plik 1729 model charakteryzuje się bardzo niskimi opóźnieniami, co jest bardzo odpowiednie dla dronów. Potrafi wykryć przeszkody na czas, takie jak domy, drzewa, przewody, itp., i uniknąć ich w jak najkrótszym czasie. Wiele fabryk dronów w Chinach przyjęło ten system nadawczo-odbiorczy wideo.
- Please note that this transmitter only supports HDMI 1080P or 720P input, it does not support HDMI1080i or 720i input.
- In order to decrease the latency delay, the HDMI is not including the Audio signal. Please tell me if you need it, We will make a special firmware for your order, but the latency delay will be longer than HDMI only have video signal.
- Please also note that for the HDMI used by the drone camera, please use extremely thin and anti-interference HDMI cables. Ordinary household HDMI or cheap HDMI cables may cause unexpected failures.
-
What's the distinction between 1080p and 1080i?The two display systems (1080p oraz 1080i) can both display 1920x1080 pixel images, although they do so in different ways. The letters "ja" i "p" refer to the manner in which the images are displayed. 1080i stands for "interlaced scan" and 1080p is for "progressive scan."
How to connect Vcan1729, HDMI Wireless Video Transmitter and Receiver
- Please connect the antenna first before you power on the transmitter and receiver, otherwise the Power Amplifier inside is easy to be burned.
- The parameter configuration board tool does not need to connect when you are testing.
- The power supply of the transmitter and receiver is better to use 12V 3A.
- There is two long receiver antennae and one short antenna for the transmitter. Although you do not need our transmitter antenna, please ensure that the transmitter antenna covers the frequency of 595Mhz. 595Mhz is the center working frequency.
- In the package, there is one HDMI. It is high-quality HDMI cable for drone or robot use.
- On the receiver, there are two switches on the side. (at the first time to test, please don’t move the switch and no need connect the UART cable to other devices)
PC-LCD: UART cable operate from the computer or LCD on the receiver, there is one LCD menu. If you put the CTRL switch on the LCD side, then the receiver parameter can be adjustable by menu, if you put the CTRL switch on the PC side, then the receiver parameter can be adjustable by computer, you need connect the UART cable to the computer.
LCD power: POZA / na, it can power on or off the small screen on the receiver, after change the receiver parameter, maybe you want to power off the screen displayer to save the power
- For testing, just connect the two receiver antenna on the RF1 and RF2, HDMI output to your HDMI monitor and give it power at 12V
- For testing, just connect the one transmitter on the RF, HDMI cable to connect to your HDMI camera, and give it power at 12V.
- Please contact us if you have any question, or show us the picture or video to us, we will offer you any further information.
Instrukcja obsługi
Packaging size:127*27*12CM
Waga:8.5KG