Wärmebildkamera zur Messung der Bereichstemperatur und Kamera mit sichtbarem Licht. Dual-Licht zur Brandschutzüberwachung

Feature

1. High sensitivity infrared camera
2. High-definition HD visible camera
3. It can be used for temperature detection in various places
4. Area Intrusion Detection, Cross-Border Detection, High Temperature Object Detection
5. Multi-zone temperature measurement mode is supported
6. IP67 Schutz
7. Used for long-distance human body temperature detection 1m~4m
8. Kamera + embedded motherboard + black body integrated structure, smaller size and lighter weight
9. Kein Computer erforderlich, HDMI standard video signal output, directly connected to the monitor
10. Automatic correction, no fear of the impact of ambient temperature changes on thermal imaging
11. Accurate forehead temperature algorithm measurement, filtering background high temperature impact
12. Support mask recognition, abnormal body temperature, instant reminder alarm 9 Real-time capture Optional network server Connect to the cloud for data analysis

Spezifikation

Visible camera
Lösung	4 Millionen Pixel
Image sensors	GC4653 1/3”
Imaging devices	CMOS
Infrared camera
Detektortyp	Vanadium oxide uncooled detector
Lösung	384*288 high sensitivity detector, support contrast adjustment
Linse	3.8mm or 6.2mm or 10mm
Temperaturmessbereich	0 ℃-550 ℃
Genauigkeit der Temperaturmessung	± 2°C or ±2% of reading, whichever is maximum
Operating bands	8～14 um
NETD	≤60mK （F/1,300K, 50Hz）
Bildrate	50Hz
Other parameters
Betriebstemperatur	-20℃~80℃
Schnittstelle	RJ45
Installationsumgebung	Indoor or outdoor
Installation:	Brackets, wall mounting, hoisting

FAQ

Q1: Does your thermal + day light dual lens camera work well with 1.4g communication system support rc link for controlling the drone in real-time too?

A1: Ja, it is working well with our TX900, 1.4Ghz wireless video data RC link.

Q2: What is the default IP address of the camera?
A2: The default IP address of the dual lens thermal imaging camera is 192.168.1.185.

Q3: What are the default login credentials for the camera?
A3:

• Nutzername: Administrator

• Passwort: 123456

Q4: How do I log in to the camera’s web interface?
A4: Connect the camera and your computer to the same network, ensure your computer is in the same IP subnet, then open a web browser and enter http://192.168.1.185. und http://192.168.1.168.Log in using the default username and password.

Q5: Can the IP address and password be changed?
A5: Ja. Nach dem Anmelden, you can modify the network settings and change the password through the camera’s web management interface. It is recommended to change the default password for security purposes.

Q6: After changing the device IP to my home network, why is the daylight (sichtbares Licht) video missing while the thermal video still works?
A6: This model has a built-in visible light IPC (IP Kamera) in addition to the thermal camera. When you change the main device IP address, the visible light IPC IP address must also be updated accordingly. If the IPs are not in the same network segment, the daylight video will not display.

Q7: How can I restore the daylight (sichtbares Licht) Video?
A7: Please follow these steps:

1. Modify the visible light IPC IP address so that it is in the same subnet as the main device IP.

2. Geben Sie die ein correct visible light IPC IP address in the device’s Visible Light Settings Speisekarte.

3. Ensure that the current visible light IP shown in the menu is in the same network segment as the device IP.

4. If your computer uses a fixed IP address, add an additional IP address to your network adapter that matches the device subnet to ensure proper communication.

Q8: Why does the thermal video still display normally?
A8: The thermal camera is integrated directly into the main device, so it is not affected by the visible light IPC network configuration. Only the visible light video depends on correct IPC IP settings.

F9: What is the key point to avoid this issue in the future?
A9: Whenever you change the device IP address, always make sure that the visible light IPC IP, das device IP, und das computer IP are all within the same network segment.

F10: Does this dual-sensor (Wärmebildtechnik + sichtbares Licht) camera support PoE power supply? Falls ja, what is the supported voltage (or PoE standard)? （PoE=Power over Ethernet）
A10: Unterstützt. Please indicate this requirement when placing the order, and we will add the accessory inside the unit accordingly.

OSD Menu in Video