Broadcast-HDMI-Encoder zum DVB-T-HF-Modulatorkartenmodul

Broadcast-HDMI-Encoder zum DVB-T-HF-Modulatorkartenmodul

FAQ

Could you show how the LCD board works?
Please check the below YouTube video.

Can this HDMI to DVB-T RF modulator operate at 340 und 380 MHz with a 6 MHz-Bandbreite?
Kein Problem. Please see the test results on the spectrum graph.

Is it possible to set the bit rate to a minimum of 5-6 Mbps?
Most professional-grade modulators support both configurable fixed bitrate (CBR) and adaptive/variable bitrate (VBR) modes. Our model bit-rate supports 5-25Mbps. The bitrate is set to VBR mode. Even if you lower the setting, the bitrate will still spike when the video content is complex. CBR mode. The bitrate will fluctuate by approximately 3% below the target value. Zum Beispiel, with a target bitrate of 8Mbps, it will fluctuate between 7.8Mbps and 8Mbps. aber, lowering the bitrate will also affect the image quality, especially for high-definition programs.

Besonderheit	Fixed Bitrate (CBR – Constant Bitrate)	Adaptive Bitrate (VBR – Variable Bitrate)
Wie es funktioniert	Das bitrate remains constant, regardless of the complexity of the video content.	Das bitrate dynamically changes based on scene complexity (z.B., high for fast action, low for static scenes).
Videoqualität	Consistent but can suffer from blocky artifacts in complex scenes; may waste bandwidth on simple scenes.	Generally higher overall perceptual quality. Allocates more bits to complex scenes and fewer to simple ones.
Bandwidth Usage	Constant and predictable. Essential for stable bandwidth planning and managing multiple channels.	Fluctuates and is less predictable. Requires more robust network handling to accommodate bursts.
Ideal Use Case	Video conferencing, stable content, or bandwidth-constrained systems where predictable data rates are a priority.	Content with varying motion (Sport, Filme) where achieving the best possible video quality is the main goal.
Konfiguration	Usually a direct setting where you input a specific value (z.B., 4, 6, 8 Mbps).	Often a mode you select (z.B., „VBR“), sometimes with target quality or max/min bitrate parameters.

• Wählen CBR (Behoben) for applications where bandwidth stability and predictability are critical, such as in large headends where multiple channels share a fixed bandwidth pipeline.

• Wählen VBR (Adaptiv) when you want to maximize video quality for content with high motion and have the network capacity to handle bitrate variations.

Product Safety and Operational Guide

1. Stromversorgung & Electrical Safety

• Mains Connection: This product must be connected to a mains power supply.

• Disconnection: Always disconnect the device from the mains supply before performing any maintenance, cleaning, or modifications to the installation.

• Overvoltage Protection: To prevent short circuits or fire, never overload power lines.

• Correct Power Adapter: For single-channel models, only use the provided 12VDC power supply. Using an unauthorized power adapter may cause damage.

2. Umgebungsbedingungen

• Temperatur: The device must be installed and operated within its specified minimum and maximum temperature range.

• Luftfeuchtigkeit & Liquids:

  • Protect the device from splashes and moisture.

  • Do not place any objects filled with liquids on or near the unit.

  • Do not install in humid places or in direct sunlight.

  • If liquid spills into the cabinet, immediately disconnect the power.

• Weather Exposure: Do not expose the unit to rain or moisture.

3. Ventilation & Kühlung

• Airflow: Ensure ventilation holes are never obstructed.

• Gehäuse: The device must not be installed in a hermetically sealed environment.

• Clearance: Maintain a minimum distance of 15 cm (6 Zoll) around the apparatus from other electronic products or heat sources to ensure sufficient ventilation and prevent overheating.

4. Wartung & Zubehör

• Cleaning:

  • Disconnect the module from power before cleaning.

  • Clean only with a soft, dry or slightly damp cloth. Do not use solvents or abrasive cleaners.

• Compatible Accessories: The use of accessories, Kabel, or power supplies not specified or provided by the manufacturer may cause damage and void the warranty.

5. General Installation

• Follow all minimum and maximum operational specifications provided in the full user manual.

• Ensure the installation location is stable, dry, and well-ventilated.

WEB OPERATION INSTRUCTION

For setting configurations, you can use the Web NMS to control and set by connecting the device to a computer’s RJ45 Port. The default IP of device is 192.168.0.168. Your computer will require a static IP address in the range 192 . 168 . 0 . xxx except device’s ; ansonsten, it would cause an IP conflict

1. Computer static IP address Setting

The IP Address of the computer must be in the same participation as device’s. System Control > Network Connections > LAN Connection > Eigenschaften >Internetprotokollversion 4 TCP/IPv4 > Eigenschaften,as the picture:

 

2. Device set up and Log in

1. Connect the PC to the Ethernet port of the Device.
2. Launch the web browser and delete browsing history.
3. When log in to the IP (192.168.0.168), you will see the log in page.

The factory password is “admin”. Enter the password and click button “Apply”.

Auch, user can changed the Username and Password by click “Change” , details display as following page.

3. General Section

In “ General ” section, you can change basic settings as following format description.

Quelle	HDMI
System	DVB-T
Frequenz(KHz)	50000-900000
RF Attenuation(dB)	0-30
Service Name	bis zu 15 alphanumeric characters
FFT	2K, 8K
Coderate	1/2, 2/3, 3/4, 5/6, 7/8
Konstellation	QPSK, 16QAM, 64QAM
Bandbreite (MHz)	6, 7, 8
LCN	1-1023
Schutzintervall	1/4, 1/8, 1/16, 1/32

4. Stream Section

In “ Stream ” section, you can change detail TS setting as following format description.

PMT PID	32-8190
Video PID	32-8190
Audio PID	32-8190
PCR PID	32-8190
TS ID	1-65535
Service ID	1-65535
Netzwerk-ID	1-65535
ON ID	1-65535
Service Provider	bis zu 15 alphanumeric characters
Network Name	bis zu 15 alphanumeric characters Range
Encoder Bitrate	5-25Mbps
Audio-Encoder	MPEG, AAC
Half FPS	Ein/Aus
FHD Output	Auto/Interlace
Latenz	500, 800, 1000Frau

 

5. Network Section

Die Standard-IP ist 192.168.0.168. Allow user manual change in this page.

6. Update Section

Klicken „Aktualisieren“ on the left side of the homepage to display the following page

Bemerkung:

1. Make sure the network is stable before operation.
2. Avoid opening two pages with the same URL.
3. Avoid updating the FW & Main MCU through the router, which may cause the update to fail.
4. Ensures the route and power supply are not separated in the update process.
5. After the update, it takes a while for the device to automatically restart. And never turn off the power supply during this period.

6.After the update, if the page does not automatically response, please do not power off, and try to reload page, or use another browser to open again.

7.If the update doesn’t work properly, hold the reset button for 5 seconds before reloading the web page.

6.1. Update LCD Module

1. Klicken “ LCD Module ” button and pop up a dialog box.
2. Choose the file[xxx.bin] to be uploaded.
3. After the update is completed, it will automatically return to the settings page.

6.2. Update Modulator Firmware

1. Klicken “ Update Modulator Firmware ” button and pop up a dialog box.
2. Choose the file[xxx.v2img] to be uploaded.
3. After the update is completed, it will automatically return to the settings page.

6.3. Update Main MCU

1. Klicken “ Start Update Main MCU ” Taste, it will jump to another page as below picture.
2. Choose the file [xxx.bin] to upload then click “ Update ”
3. When update finished, will automatically return to homepage.

7. System Info Section

User can check the software version and Video sources information here.

The button “ Reload ” is to upload the file that saved settings before.

The button “ Factory Default ” is for the settings restore factory defaults.