COFDM IP wireless data transmitter module
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port Vcan1816
- Common cofdm transmitters are video signal inputs such as HDMI, CVBS, SDI, or AHD. This one is a transparent transmission module that can support IP cameras and support video and data through cofdm.
- Paired with this COFDM network video data transmitter is a COFDM receiving module, which can realize HDMI and CVBS output, and can also output video to a computer, RTSP, or UDP player through an IP network port RJ45.
- The key role is to use UDP broadcast/multicast to send data.
- تشکیل پیوند انتقال پورت شبکه انتقال بی سیم یک طرفه ماژول فرستنده داده ها را از طریق پورت شبکه دریافت می کند و پس از دریافت داده، داده های دریافتی توسط پورت شبکه را به صورت COFDM ارسال می کند. + receive the module, تشکیل پیوند انتقال پورت شبکه انتقال بی سیم یک طرفه ماژول فرستنده داده ها را از طریق پورت شبکه دریافت می کند و پس از دریافت داده، داده های دریافتی توسط پورت شبکه را به صورت COFDM ارسال می کند.
- ماژول انتقال داده ها را از طریق پورت شبکه دریافت می کند و داده های دریافتی توسط پورت شبکه را به صورت COFDM ارسال می کند.
- ماژول انتقال داده ها را از طریق پورت شبکه دریافت می کند و داده های دریافتی توسط پورت شبکه را به صورت COFDM ارسال می کند., ماژول انتقال داده ها را از طریق پورت شبکه دریافت می کند و داده های دریافتی توسط پورت شبکه را به صورت COFDM ارسال می کند.
عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه:
فهرست مطالب
امکانات
- عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه, عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه.
- عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه: پورت شبکه, عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه. عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه: عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه
- CFG-UART: عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه, 4عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه, can be docked to our parameter configuration panel. عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه, پهنای باند بی سیم, عملکرد ماژول انتقال بی سیم پورت شبکه COFDM یک طرفه (مانند فاصله حفاظتی, مانند فاصله حفاظتی, حالت صورت فلکی, مانند فاصله حفاظتی, و غیره.) مانند فاصله حفاظتی.
- مانند فاصله حفاظتی (Tx): مانند فاصله حفاظتی.
- رابط کارت TF, به روز رسانی نرم افزار, مانند فاصله حفاظتی.
- رابط ورودی برق (قدرت): 2PIN 2.0mm pitch Phoenix terminal. ولتاژ تغذیه: 7V ~ 24V.
- مانند فاصله حفاظتی: مانند فاصله حفاظتی, و هنگام انتقال داده ها معمولاً داده ها فلش می شوند.
- نشانگر LED قدرت: نشانگر برق ورودی, مانند فاصله حفاظتی.
- مانند فاصله حفاظتی: 73مانند فاصله حفاظتی (مانند فاصله حفاظتی), مانند فاصله حفاظتی.
- مانند فاصله حفاظتی:
- نسبت های رمزگذاری کانولوشنال قابل تنظیم: 1/2, 2/3, 3/4, 5/6, 7/8
- نسبت های رمزگذاری کانولوشنال قابل تنظیم: QPSK / QAM16 / QAM64
- حالت IFFT: 2K
- نسبت های رمزگذاری کانولوشنال قابل تنظیم: 1/4, 1/8, 1/16, 1/32
- پهنای باند بی سیم: 1 نسبت های رمزگذاری کانولوشنال قابل تنظیم, 1مرحله کیلوهرتز
- نسبت های رمزگذاری کانولوشنال قابل تنظیم: -94نسبت های رمزگذاری کانولوشنال قابل تنظیم (نسبت های رمزگذاری کانولوشنال قابل تنظیم, نسبت های رمزگذاری کانولوشنال قابل تنظیم).
- نقطه فرکانس کاری مرکز: بین 200 مگاهرتز ~ تا 2300 مگاهرتز را می توان خودسرانه پیکربندی کرد
نقطه فرکانس کاری مرکز
سرعت انتقال بی سیم (نرخ رابط هوا):
نرخ(نقطه فرکانس کاری مرکز) نقطه فرکانس کاری مرکز (پهنای باند(مگاهرتز) * 8.0/7.0) / (1+سرباز) * 1512/2048*نقطه فرکانس کاری مرکز(نقطه فرکانس کاری مرکز) * نقطه فرکانس کاری مرکز * 188/204.
نقطه فرکانس کاری مرکز, نقطه فرکانس کاری مرکز, نقطه فرکانس کاری مرکز, نقطه فرکانس کاری مرکز:
UART AT Command
ATDR、ATSD、ATSG、ATSM、ATGD、ATSR、ATGR、ATGB is useful
For the UART AT command operation and format, لطفا لینک زیر را بررسی کنید.
رمزگذار مدولاتور رمزگشای ماژول دمدولاتور دستورالعمل های پیکربندی پارامتر COFDM AT Command
Receiver Module
Suggestions
- This is a one-way unidirectional transmission system. if you need a two-way bidirectional transmission system, لطفا این لینک را بررسی کنید. https://ivcan.com/t/two-ways/ or https://ivcan.com/ru/p/mini-cofdm-wireless-ethernet-transmission-module-rj45/
- This is only a data transmission system, if you need video+data transmission, please look details of these modules, HTTPS://ivcan.com/p/modulator-demodulator-module-encoder-decoder-hdmi-cvbs/
- If you need a relay (تکرار کننده) to support a longer transmission range (distances), please choose stronger PA (تقویت کننده توان) داخل, مثلا, change 1Watts PA to 2.5 وات یا 5 وات.
–160ماژول گیرنده COFDM ویدئوی HD MHz~860MHz با خروجی HDMI/AV/Ethernet/USB
The COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, مناسب برای استفاده در کاربردهای سیال و با تحرک بالا. ماژول گیرنده سیگنال های دو آنتن را می پذیرد تا به طور قابل توجهی عملکرد دمدوله شده را افزایش دهد و برد عملیاتی را افزایش دهد.. ماژول گیرنده می تواند با توجه به فرکانس و پهنای باند از پیش تعیین شده، به سرعت انتقال ورودی را پیدا کرده و آن را قفل کند.. این ماژول گیرنده دارای طیفی از خروجی های سیگنال جامع از جمله HD در 720p و 1080P است., ویدیوی مانیتور HD CVBS با تبدیل پایین, and two analog audios supported.
The receiver module also includes DVR record functionality with a Micro SD card or USB disk. علاوه بر این, the receiver module has a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like smartphones or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the Our COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. این می تواند نقش اساسی در ارائه ویدیوی زنده در زمان واقعی از هر دو سیستم عامل موبایل زمینی و هوابرد ایفا کند.
- دمدولاسیون COFDM و رمزگشای ویدیویی H.264;
- وضوح فول اچ دی, 1080P@60fps;
- امنیت عالی توسط رمزگشایی AES;
- ضبط DVR با کارت Micro SD یا دیسک USB;
- سرور داخلی RTSP پخش ویدئو را از طریق اترنت فعال می کند;
- Enables video streaming over a USB host for the remote device;
- از رشته کاراکترهای نمایش بر روی صفحه نمایش ویدیو در حالت OSD پشتیبانی می کند;
- Stable signal transfer in NLOS and high-speed moving;
- فرکانس کاری قابل تنظیم, and bandwidth.
مشخصات:
IO
HD video output | HDMI type A connector |
خروجی ویدئو کامپوزیت | 6کانکتور PIN PH2.0mm |
خروجی صوتی | Embedded HDMI and CVBS |
ورودی RF | Two SMA female 50Ω |
فیلم با کیفیت بالا از دوربین های نقطه دید | 2PIN PH2.54mm connector |
میزبان USB | 4کانکتور PIN PH2.0mm |
داده های TTL UART | 3کانکتور PIN PH1.25mm, 3.3V signal |
فیلم با کیفیت بالا از دوربین های نقطه دید | 4کانکتور PIN PH1.25mm, 3.3V signal |
شبکه محلی کابلی | 6کانکتور PIN PH2.0mm |
کارت TF | اسلات کارت TF |
کلید&ال ای دی ها | 2*5کانکتور PIN PH2.0mm |
کشف رمز
فرمت های دمدولاسیون | COFDM(DVB-T) |
حامل ها | 2K |
پهنای باند | فیلم با کیفیت بالا از دوربین های نقطه دید, فیلم با کیفیت بالا از دوربین های نقطه دید |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
فاصله گارد | 1/32, 1/16, 1/8, 1/4 |
صورت فلکی | QPSK, 16QAM, 64QAM |
نرخ بیت | 0.5فیلم با کیفیت بالا از دوربین های نقطه دید |
RF
باند فرکانس | 160مگاهرتز ~ 860MHz |
اندازه مرحله تنظیم | 1کیلوهرتز |
حساسیت | -97± 1dBm(BW = 8 مگاهرتز, QPSK, CR=2/3, GI=1/16) برای یک کانال و 3dBm برای دو کانال اضافه کنید |
تصویری و صوتی
خروجی تصویری | HDMI و CVBS, شبکه محلی کابلی(RTSP protocol by default, option UDP), یو اس بی |
فرمت های ویدیویی | 1080P یا 720P
720*480 60من(NTSC), 720*576 50من(PAL) |
رمزگشایی ویدیو | MPEG-4/H.264 AVC |
خروجی صوتی | صوتی HDMI و AV تعبیه شده |
رمزگشایی صدا | AAC |
رمزگشایی | [object Window] |
ذخیره سازی | USB disk or micro SD card |
نظارت و کنترل
Comprehensive receiver setup with Our Config Panel or Windows PC or other devices via control UART.
محدوده دما
راه اندازی فراگیر فرستنده با پنل پیکربندی Sihid یا رایانه شخصی یا دستگاه دیگری از طریق Control UART: 0درجه تا +70 درجه سانتی گراد محیط
ذخیره سازی: راه اندازی فراگیر فرستنده با پنل پیکربندی Sihid یا رایانه شخصی یا دستگاه دیگری از طریق Control UART
خصوصیات فیزیکی
Board Dimensions: 80.4*50.8میلی متر
نیازمندی های قدرت
راه اندازی فراگیر فرستنده با پنل پیکربندی Sihid یا رایانه شخصی یا دستگاه دیگری از طریق Control UART: 9~24VDC
مصرف برق: <300mA@12V
IO Signals
کلید + ال ای دی ها:
The receiver module has a 2*5PIN PH2.0mm connector which provides “keys + LEDs” signals. It is designed for customers who want to expand LEDs and keys to their cases.
PWR led signal: this two-pin can connect to an led for the power indicator, and constant light when the device is normally powered.
The link led signal: this two-pin can connect to an led for a wireless link indicator, which blinks when the video stream is received.
REC led signal: this two-pin can connect to an led for a record indicator, and constant light when video recording.
REC key signal: this two-pin can connect to a button for the switch of video recording, and a short press to change its status. The receiver will automatically check the storage device(micro SD card or USB disk) after powering on and start to record video when the storage device is inserted. Just press it to stop or record again.
OSD key: this two-pin can connect to a button for turning on/off the status of the OSD displaying, long press it to switch(more than 1s). The status will be kept after a reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:
RF:338.0MHz BW:4.0مگاهرتز ; RF, فرکانس کاری; BW, پهنای باند
QPSK CR:2/3 سرباز:1/16 ; صورت فلکی, FEC, فاصله گارد
AIR:3.90مگابیت در ثانیه ; AIR, wireless transmitting bitrates
VBR:3.05Mbps AES OFF ; VBR, video bitrates; AES OFF, AES encryption turned off.
SIG1:27 SIG2:22 ; SIG1, the signal intensity of antenna 1; SIG2, the signal intensity of antenna 2
ber1:0.14% ber2:100.00% ; ber1, bit error rate of antenna 1; ber2, bit error rate of antenna 2
ضبط کردن بدون ذخیره سازی ; video recording status
با فرستنده COFDM جفت شده است:
The default normal features of the two-antenna Wireless receiver module can be paired with all of Our H.264 transmitter modules. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200~250ms.
Our two-antenna COFDM Wireless Receiver module can also be paired with our COFDM transmitter module for the lowest video latency application when manufactured with specified firmware. The specified firmware enables proprietary H.264 video compression/decompression only using p-frames for the lowest latency. تأخیر ویدیو از ورودی فرستنده تا صفحه نمایش HDMI گیرنده حدود 50 تا 130 میلیثانیه است..
How to test COFDM IP wireless video data transmitter module?
ethernet modem in one way
سوالات متداول
Please note that this network transparent transmission device is one-way transmission, it can only realize UDP broadcast function, although there is an RJ45 network port, but because it is not two-way transmission, it cannot realize the ping command, so even if you want to connect an IP camera, you need special customization IP cameras, because ordinary IP cameras need two-way transmission equipment.
How to test this network transparent transmission device, لطفا لینک زیر را بررسی کنید
How to test COFDM IP wireless video data transmitter module
خیر, just net transfer via IP ethernet RJ45 input.
- If you want to test the video transfer, maybe you need an encoder board Vcan1746, transfer HDMI / CVBS video to IP stream, then connect the 1816 فرستنده.
- سوال: I already have Vcan1776, which has a Vcan1746 encoder board at the transmitter module, should I get one more encoder board?
- پاسخ: Although the encoder board of Vcan1776 can be reused. It needs to disassemble the Vcan1776 RF module, then connect the network port adapter cable, and change the different firmware. It is not recommended to do this. It is recommended that you purchase another separate encoder board.
- The voltage range of TX RX is 7~24V.
- At 12V power supply, use an adapter with a maximum of 1A or more.
- Prepare a formattedFAT32format Micro SD card
- Unzip the upgrade file from our verify and send to you, Here is "1816_update_image_xx_yy.zip" پرونده, and copy it to the root directory of the Micro SD card, pay attention to keep the directory structure unchanged (there is a flash folder in the root directory of the Micro SD card, and there is an app folder in it).
- Insert the Micro SD card into the Vcan1816 module, power on and wait for the red light on the board to flash, indicating that the upgrade is successful.
- توجه داشته باشید:
Under normal circumstances, the update will be completed within 30s after power-on (the red light flashes). If the red light does not flash for a long time after power-on, please check the connection of Micro SD and try power-on again.