30Km long distance COFDM HDMI Wireless Video Transmitter پرسش و پاسخ
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150کیلومتر راه دور COFDM HDMI فرستنده سیستم انتقال ویدئو بی سیم گیرنده مجموعه کامل صوتی تصویری TX RX برای پهپاد پهپاد UGV 1080P
ویژگی
- بسیار یکپارچه, طراحی ترکیبی مدولار
- استفاده از فناوری مدولاسیون COFDM, H.264 image coding technology
- می تواند یک کانال HDMI 1080P را انتقال دهد (SDI اختیاری) سیگنال
- تاخیر کمتری, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 میلی ثانیه.
- همه جانبه ارتباطات, ساختمان دیوارها نمی ترسم
- ارتباط سریع با مسافرت, the maximum moving speed can reach 600 کیلومتر / ساعت.
- جعبه آلومینیومی نوع هیت سینک فرستنده, ضد ضربه, Waterproof case is optional.
- پشتیبانی از LOS و غیر خط دید (NLOS) انتقال موبایل
- فاصله کمتر از 30 کیلومتر تحت شرایط دید ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- دریافت همزمان سیگنال های صوتی و تصویری, چند منظوره HDMI1080P با کیفیت بالا اختیاری, کیفیت استاندارد DVD خروجی با کیفیت استاندارد
- گیرنده می تواند توابع ضبط فیلم و پشتیبان گیری را درک کند
- 128-رمزگذاری و رمزگشایی AES بیتی
- سفارشی سازی کامل در دسترس است
- Upgrade tool: پارامتر پیکربندی برد
- استفاده کنید: پهپاد, وسايل نقليه & UGV
- تلفیق: COFDM
- ولتاژ کاری: DC11V-DC13V
- در حال حاضر کار: 0.5~ 2W (بسته به PA های مختلف)
- قدرت انتقال: 0.5W~20W optional
فهرست مطالب
کاربرد
این محصول عمدتا در شناسایی فنی و جمع آوری شواهد ادارات بازرسی ایمنی و امنیت عمومی استفاده می شود, انتقال تصویر در زمان واقعی از هواپیماهای بدون سرنشین, کشتی های بدون سرنشین, رله رادیو و تلویزیون, پخش زنده رادیو و تلویزیون: زمینه پخش, پخش ورزشی, اخبار اجتماعی, هوا زنده, کارگاه, سفر کوهنوردی, و جنبه های دیگر. برای انتقال همزمان تصاویر متحرک با کیفیت در محیط های پیچیده مانند مناطق شهری مناسب است, دریاها, و کوه.
مشخصات فرستنده
روش مدولاسیون | COFDM |
ولتاژ کاری | DC11V ~ DC13V |
جریان کار | 0.5 وات: .0.6A DC12V, 1 وات: .0.8A DC12V, 2 وات: ≤1.5A DC12V 5 وات: ≤3.0A DC12V 10 وات: ≤5.0A DC12V 20 وات: ≤7.0A DC12V |
رابط کنترل | رابط استاندارد RS232, 8 بیت های داده, 1 Sبیت بالا, Parity Bit, نرخ باود: 19200 |
رابط داده شفاف, | یک انتقال پورت سریال یک طرفه شفاف, 8 بیت های داده, 1 توقف بیت, از Parity Odd پشتیبانی کنید, Parity Bit, برابری بی سیم, نرخ باود: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
روش های رمزگذاری | رمزگذاری 128 بیتی را پشتیبانی می کند |
نقشه برداری مدولاسیون | QPSK (4QAM), 16QAM, 64QAM |
تصحیح خطا به جلو | 1/2 2/3 3/4 5/6 7/ 8 |
فاصله گارد | 1/32 1/16 1/8 1/4 |
شماره حامل | 2K |
پهنای باند فرکانس | 2 / 3 / 4 / 5 / 6 / 7 / 8M قابل تنظیم است |
جریان کد انتقال | 2000kbs ~ 20000kbs قابل تنظیم است |
انتقال قدرت | 0.5 / 1 / 2 / 5 / 10 وات |
فرکانس انتقال | هر فرکانس قابل تنظیم, مرحله 1 مگاهرتز |
یک صافی قدرت | در عرض 10 مگاهرتز بدون باند از 0.2dB |
نسبت شانه | توان خروجی 27 دسی بل, نسبت شانه از -30dB بهتر است |
هارمونیک دوم | 45-45dB |
بیشتر | 32Db |
ورودی فیلم | 720×480 60من(NTSC), 720×576 50من(PAL), 720 50پ, 720 60پ, 1080 50من, 1080 60من, 1080 24پ, 1080 25پ, 1080 30پ, 1080 50پ, حالت های مختلف سازگار است. |
رابط HD | HDMI, SDI اختیاری |
قالب رمزگذاری ویدئو | H.264 |
استاندارد حفاظت | شاسی رادیاتور کاملاً آلومینیومی, ضد خوردگی, طراحی ضد ضربه |
به طور کلی اندازه | 9 ایکس 6.4 ایکس 2.3 سانتی متر |
وزن کلی | ≤0.20 کیلوگرم |
مشخصات گیرنده
پارامترهای گیرنده چند پهنای باند پهنای باند نصب شده روی ماشین | |
محدوده فرکانس را دریافت کنید | 170-860مگاهرتز VHF&UHF |
پهنای باند فرکانس | 2/3/4/5/6/7/8مگاهرتز, اختیاری |
سطح ورودی RF | -94dBm ~ -15dBm (8M پهنای باند)/-98dBm ~ -15dBm (2M پهنای باند) |
RF امپدانس ورودی | 50 اهم |
اتصال ورودی RF | سر N |
حالت دمولاسیون | COFDM |
حالت صورت فلکی | QPSK, 16QAM, 64QAM (اختیاری) |
تصحیح خطا به جلو | 1/2, 2/3, 3/4, 5 /6,7/8 (اختیاری) |
شماره حامل | 2K, |
فاصله گارد | 1/32, 1/16, 1/8, 1/4 (اختیاری) |
رمز گشایی ویدیو | MPEG-2MP@ML/H.264 |
نسبت ابعاد | 4: 3 16: 9 |
تصویر ویدئویی است | 720 * 576 @ 8MHz 1080P @ 60P |
حالت خروجی صدا | استریو نامتعادل 300 / 200mv |
خروجی صوتی | خروجی 2 صوتی + 2خروجی تصویری |
ولتاژ بهره برداری | AC220V / DC12V <0.5آ |
دمای عملیاتی | – 20℃ ~ + 50 |
اندازه ظاهر | 480*260*45 (1تو) شاسی |
وزن تجهیزات | 1.5کیلوگرم (زبان دو طرفه 2.5 کیلوگرم) |
توجه داشته باشید: اتصال پیش فرض HDMI است, اگر به مدل ارزانتری نیاز دارید, اتصال دهنده CVBS Yellow video connector 720p HDMI, لطفا اینجا را بررسی کنید برای یک مدل دیگر.
شرح:
– این دستگاه از فناوری COFDM استفاده می کند, که آنتن انتقال را یکپارچه می کند, مدولاسیون دیجیتال, سمعی, و عملکرد ویدئویی.
– اندازه جمع و جور, گرمای کم, و دامنه انتقال طولانی
– سازگار با یک دوربین کوچک, می تواند ضبط و انتقال تصویر HD را فعال کند
– در صورت استفاده از آنتن با بهره بالا، برد انتقال طولانی تر خواهد بود
– دامنه انتقال: 5000متر (بدون هیچ وقفه ای)/500M با موانع قطع می شود
امکانات:
– اندازه جمع و جور, طراحی مدولاسیون
– از فن آوری مدولاسیون COFDM استفاده می کند, فناوری فشرده سازی تصویر MPEG-2
– ارتباطات همه جانبه
– ارتباطات با سرعت بالا امکان انتقال صدا و تصویر در زمان واقعی را فراهم می کند
– یک بدنه آلومینیومی که ضد ضربه است
– انتقال NLOS
مشخصات:
فرستنده:
– اندازه:90x64x23mm
– وزن:200G
– انتن:22میلی متر
گیرنده
– اندازه: 87x70x20 میلی متر
– وزن:200G
– ارتفاع آنتن:42.5سانتی متر (می تواند خم شود)
مشخصات فنی
– تلفیق: COFDM
– ولتاژ کاری: DC11V-DC13V
– در حال حاضر کار:0.5W: کمتر از 0.6A @ DC12V
– پورت کنترل: پورت standrad RS232. 8-بیت داده های بیتی, 1-کمی متوقف شد, نرخ علامت در ثانیه:19200, بررسی برابری عجیب و غریب
– پورت داده انتقال:8 بیت داده های بیتی,1 کمی متوقف شد, نرخ علامت در ثانیه,1200,2400,4800,9600,19200,38400,57600,115200,230400
– رمزگذاری: حمایت کردن 128 رمزگذاری
– نقشه برداری مدولاسیون: QPSK (4QAM),16QAM,64QQAM
– تصحیح خطا به جلو: 1/2,2/3,3/4,5/6,7/8
– از این فاصله محافظت کنید: 1/32,1/16,1/8,1/4
– شماره حامل:2K
– پهنای باند فرکانس:2/3/4/5/6/7/8M قابل تنظیم است
– جریان حمل و نقل:2000kbs-20000kbs قابل تنظیم است
– قدرت انتقال: 2W
– فرکانس انتقال: می تواند سفارشی شود, گام 1 مگاهرتز است
– صافی قدرت: کمتر از 0.2db در 10 مگاهرتز
– هارمونیک دوم: کمتر از -45db
– بیشتر:32دسی بل
– ورودی فیلم:1VP-P,75اهم
– قالب برنامه ویدیویی: MPEG-2
– کیفیت فیلم: 720×576 وقتی بالاتر از 4M است
– قالب: NTSC و PAL را می توان تنظیم کرد
مشخصات فنی گیرنده:
– محدوده فرکانس گیرنده: 170-860مگاهرتز, VHF و UHF
– پهنای باند فرکانس: 2/3/4/5/6/7/8 مگاهرتز, قابل تنظیم
– سطح ورودی RF:-94DBM-0dbm در 8M / -98dbm-0dbm در 2M
– RF امپدانس ورودی: 50اهم
– پورت ورودی RF: دبیرستان
– مدولاسیون: COFDM
– راه صورت فلکی: QPSK,16QAM,64QAM اختیاری است
– تصحیح خطا به جلو: 1/2,2/3,3/4,5/6,7/8 اختیاری
– شماره حامل:2K
– شکاف محافظتی:1/32,1/16,1/8,1/4
– میزان نمایشگر:4:3,16:9
– تصویر ویدئویی:720×576 @ 6 مگاهرتز
– پورت خروجی صدا و تصویر: استاندارد 3.5 بندر
– ولتاژ کاری: DC12V 0.3A
بسته شامل:
– 1 فرستنده x
– 1 گیرنده x
– 1 لوازم جانبی x را تنظیم کنید
30Km long distance COFDM HDMI Wireless Video Transmitter
پرسش و پاسخ
سوال 1: من برای پهپاد UAV UGV USV حداقل به یک برد 30 کیلومتری از هوا تا زمین نیاز دارم.
پاسخ 1:سیستم ما از آن پشتیبانی می کند, باید از آمپلی فایر 2 وات استفاده کند, بهتر است از آنتن فرستنده بلند مخصوص و دو آنتن گیرنده بالاتر استفاده کنید.
COFDM-912T در مقابل COFDM-908T
سوال 2: اگر از فرستنده و گیرنده هر دو روی زمین استفاده کنم، چقدر می توانم به آنجا برسم?
پاسخ: در استفاده زمینی, فرستنده و گیرنده باید دارای اختلاف ارتفاع معینی برای ارسال فواصل طولانی باشند.
طولانی ترین فاصله فقط است 2.5 کیلومتر اگر فرستنده و گیرنده هر دو در یک ارتفاع روی زمین باشند. لطفا ویدیوی تست ما را ببینید; زیرا فرستنده و گیرنده در سطوح مختلف قرار می گیرند, یک طرف آن در کوه است, طرف دیگر در کنار دریا است, ما از دو وات پیش فرض برای انتقال استفاده کردیم 27 کیلومتر.
سوال 3: آیا از محیط کاری پشتیبانی می کند -20 درجه?
پاسخ: بله, پشتیبانی
سوال 4: من می خواهم ماژول ها و دستگاه های داخلی خود را بخرم, لطفا ابعاد آن ماژول ها را به من بگویید.
پاسخ: مدل SD: 6X7X1.6cm, مدل HD: 5X7X1.6cm
سوال 5:Do you have any special case shells for marine use?
پاسخ: بله, لطفاً تصویر زیر را بررسی کنید. (For the transmitter with a three-proof shell, ضدآب, ضد ضربه, anti-salt spray, 防水,防震,防盐雾)
اقدامات احتیاطی برای سفارشی سازی سفارش
- فرکانس: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- طول آنتن: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 یا 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
سوالات متداول
Q. What is the video resolution?
آ: HDMI 1080P.
Q. Does the transmitter power current is high?
آ: برای فرستنده, the different PA (تقویت کننده توان) داخل, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
برای گیرنده, the current is only 0.3آ (300میلی آمپر)
Q: Like we only need 10km, how much PA is recommended?
آ: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 کیلومتر. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
آ: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
آ: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610مگاهرتز).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
آ:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
آ: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
مثلا, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, و غیره.
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 متر.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
PA | THE | NLOS |
500میلی وات | >10کیلومتر | <300متر |
1W | >30کیلومتر | <500متر |
5W | >60کیلومتر | <1500متر |
20W | >120کیلومتر | <3000متر |
50W | >200کیلومتر | <5000متر |
100W | >250کیلومتر | <10کیلومتر |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50پ. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. مثلا, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 ساعت ها.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Because COFDM is a one-way transmission, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- بله, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- بله, we can build the transmission of telemetry and video in COFDM-908T.
- اولین, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 وات. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Here are some correspondences between the output power and the dBm parameters displayed by the instrument.
- 20mW is 13dBm
200mW is 23dBm
1 Watts is 30dBm
2 Watts is 33dBm
5 Watts is 37dBm
10 Watts is 40dBm
20 Watts is 43dBm
50 Watts is 47dBm
100 Watts is 50dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
بله, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080[object Window], 1080[object Window]
در حال حاضر, it does not support 1080i, nor does it support 4K transmission.
20تست فرستنده و گیرنده ویدیوی بی سیم HDMI کیلومتر بر روی دریا برای قایق یا از ساحل به کشتی
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
بررسی
هیچ بررسی وجود دارد هنوز.