30-فرستنده ویدیوی بی سیم پهپاد پهپاد HDMI میلی ثانیه
Ultra-low-latency 30~40 millisecond UAV HDMI Wireless Video Transmitter Drone wireless transmission system for Drone Camera Vcan1729
The latency of a regular COFDM transmitter and receiver is 200-300 میلی ثانیه.
This wireless video transmitter and receiver system has a delay time of less than 30 میلی ثانیه.
فهرست مطالب
ویژگی
- بسیار یکپارچه, طراحی ترکیبی مدولار
- فناوری مدولاسیون COFDM را بپذیرید
- FPGA-based H.265 video compression technology
- تاخیر فیلم بسیار کم (تاخیر سیستم انتقال کمتر از 30 میلی ثانیه)
- همه جانبه ارتباطات, ساختمان دیوارها نمی ترسم
- ارتباط بین سفری با سرعت بالا,
- کیس آلومینیومی با هیت سینک, ضد ضربه و مقاوم در برابر ضربه
- غیر خط از دید (NLOS) انتقال موبایل, با فاصله نه کمتر از 20 کیلومتر در شرایط خط دید
- حداکثر سرعت حرکت می تواند به 600 کیلومتر در ساعت برسد (اندازه گیری شده)
- سفارشی سازی کامل در دسترس است
کاربرد
- It is used for drones that fly at high speed and require a video quality of 1080P.
- This product was mainly used by public security and security inspection departments for technical reconnaissance and forensics.
- Broadcasting includes radio and television live broadcasts, sports broadcasts, اخبار اجتماعی, و بیشتر.
- این برای انتقال لحظه ای تصاویر موبایلی با کیفیت بالا در شهری مناسب است, دریا, کوه, و محیط های پیچیده دیگر.
مشخصات
UAV HDMI Wireless Video Transmitter
حالت مدولاسیون | COFDM |
ولتاژ کاری | DC11V~DC18V |
کنونی کار | 1 Watts PA:≤1.7A DC12V; 2-Watts PA: ≤2.3A DC12V; 5-Watts PA: ≤3.0A DC12V |
رابط کنترل | رابط استاندارد RS232, 8 بیت های داده, 1 توقف بیت, حتی برابری, نرخ باود: 19200 |
رابط داده شفاف | یک انتقال پورت سریال شفاف یک طرفه, 8 بیت های داده, 1 ذرهء ایست نما, حمایت توازن فرد, توازن زوج, برابری بی سیم, نرخ علامت در ثانیه: 1200, 2400, 4800, 9600, 19200, 38400, 57600,230400 |
روش رمزگذاری | 128-رمزگذاری بیتی AES |
Modulation Mapping | QPSK (4QAM), 16QAM, 64QAM |
Forward Error Correction | 1/2 2/3 3/4 5/6 7/8 |
گارد فاصله | 1/32 1/16 1/8 1/4 |
شماره حامل | 2K |
Frequency Bandwidth | 2/3/4/5/6/7/8M قابل تنظیم است |
Transmission Code Stream | 2000kbs ~ 20000kbs قابل تنظیم است |
Transmission Power Amplifier | 1 وات, 2 وات, 5 وات, 10 وات, 20 وات (ما می توانیم برای شما سفارشی کنیم) |
Transmission Frequency | را می توان در هر فرکانس سفارشی کرد, فرکانس را می توان به طور مداوم تنظیم کرد, مرحله 1 مگاهرتز است |
Power Flatness | کمتر از 0.2 دسی بل در باند 10 مگاهرتز |
Band Shoulder Ratio | وقتی توان خروجی 36 دسی بل باشد، نسبت بهتر از -30 دسی بل است |
Second-Harmonic | کمتر از -60Db |
بیشتر | 32Db |
تصویری | 720 50پ, 720 60پ, 1080 24پ, 1080 25پ, 1080 30پ, 1080 50پ, 1080 60پ |
High-Definition Input | HDMI 1080P |
Video Coding Format | کدگذاری نرم H.265 مبتنی بر FPGA |
تاخیر انداختن | تاخیر سیستم انتقال کمتر از 30 میلی ثانیه, تاخیر سرتاسر |
فلز | کمترین, ضد خوردگی, طراحی ضد لرزش |
بعد، ابعاد، اندازه | 95*75*45میلی متر |
وزن | 0.248کیلوگرم |
UAV HDMI Wireless Video Receiver
- When the above toggle switch is turned to PC, the serial port data is output from the external red, white, and black three-wire connection, which can be connected to the computer; when it is turned to LCD, the serial port data is output to the LCD screen on the receiver.
- The toggle switch below is the power switch for the LCD screen that comes with the receiver.
ion mode | QPSK, 16QAM, 64QAM (اختیاری) |
تصحیح خطا به جلو | 1/2, 2/3, 3/4, 5/6, 7/8 (اختیاری) |
تعداد حامل ها | 2K, |
فاصله گارد | 1/32, 1/16, 1/8, 1/4 (اختیاری) |
رمزگشایی ویدئو | H.265 |
نسبت ابعاد | 4:3 16:9 |
تصویر ویدئویی | 1080P@60P, 50پ, 50من, 30پ, |
ولتاژ کاری | AC220V/DC12V <0.9آ |
دمای کار | -20℃ ~ + 50 |
اندازه ظاهر | 480*260* 45 (1شاسی U) |
Device Weight | 0.466کیلوگرم |
فرعی
سوالات متداول
این مدل کمترین تأخیر ما برای فرستنده و گیرنده ویدیوی بی سیم پهپاد است.
پشتیبانی می کند کمترین تأخیر 28 میلی ثانیه ای. (بدون احتساب زمان نمایش دوربین و مانیتور)
COFDM-912T, ورودی ویدئو CVBS RCA 720P, 200~ 400 میلی ثانیه.
COFDM-908T: ورودی HDMI, 200~ 300 میلی ثانیه.
Vcan1729: ورودی HDMI, 20~ 40 میلی ثانیه. مناسب برای پهپاد.
این 1729 مدل تاخیر بسیار کم است, که برای پهپادها بسیار مناسب است. می تواند موانع را به موقع تشخیص دهد, مانند خانه ها, درختان, سیم ها, و غیره., و در کمترین زمان از آنها اجتناب کنید. بسیاری از کارخانههای تولید پهپاد در چین از این سیستم فرستنده و گیرنده ویدئویی استفاده کردهاند.
- Please note that this transmitter only supports HDMI 1080P or 720P input, it does not support HDMI1080i or 720i input.
- In order to decrease the latency delay, the HDMI is not including the Audio signal. Please tell me if you need it, We will make a special firmware for your order, but the latency delay will be longer than HDMI only have video signal.
- Please also note that for the HDMI used by the drone camera, please use extremely thin and anti-interference HDMI cables. Ordinary household HDMI or cheap HDMI cables may cause unexpected failures.
-
What's the distinction between 1080p and 1080i?The two display systems (1080p و 1080i) can both display 1920x1080 pixel images, although they do so in different ways. The letters "من" و "پ" refer to the manner in which the images are displayed. 1080i stands for "interlaced scan" and 1080p is for "progressive scan."
How to connect Vcan1729, HDMI Wireless Video Transmitter and Receiver
- Please connect the antenna first before you power on the transmitter and receiver, otherwise the Power Amplifier inside is easy to be burned.
- The parameter configuration board tool does not need to connect when you are testing.
- The power supply of the transmitter and receiver is better to use 12V 3A.
- There is two long receiver antennae and one short antenna for the transmitter. Although you do not need our transmitter antenna, please ensure that the transmitter antenna covers the frequency of 595Mhz. 595Mhz is the center working frequency.
- In the package, there is one HDMI. It is high-quality HDMI cable for drone or robot use.
- On the receiver, there are two switches on the side. (at the first time to test, please don’t move the switch and no need connect the UART cable to other devices)
PC-LCD: UART cable operate from the computer or LCD on the receiver, there is one LCD menu. If you put the CTRL switch on the LCD side, then the receiver parameter can be adjustable by menu, if you put the CTRL switch on the PC side, then the receiver parameter can be adjustable by computer, you need connect the UART cable to the computer.
LCD power: OFF / بر, it can power on or off the small screen on the receiver, after change the receiver parameter, maybe you want to power off the screen displayer to save the power
- For testing, just connect the two receiver antenna on the RF1 and RF2, HDMI output to your HDMI monitor and give it power at 12V
- For testing, just connect the one transmitter on the RF, HDMI cable to connect to your HDMI camera, and give it power at 12V.
- Please contact us if you have any question, or show us the picture or video to us, we will offer you any further information.
راهنمای کاربران
Packaging size:127*27*12سانتی متر
وزن:8.5کیلوگرم