如何在 HDMI cvbs 上设置网关 ip 到 ip 视频编码器

One person asked us if it is possible to modify the gateway ip address on our HDMI/CVBS to rtsp stream via ethernet board. Confirmed, in our HDMI / CVBS to Ethernet video encoder board web management network settings page, there is only an option to modify the IP address, and there is no configuration option to modify the gateway IP address.

How does he need to set the gateway ip adddress? Because we only need the same IP address segment to access it, for exampl, 192.168.1.30. The gateway address is automatically generated by the firmware and is not provided to the user for setting. 例如, if the IP address is 192.168.1.30, the gateway address is 192.168.1.1

The buyer repleid us, he need to connect our device to a router that has its own address (gateway address, 37.0.1.6). These addresses are different from 192.168.1.xxx. Is it possible to change the gateway in the firmware itself.

The gateway is only useful when the board needs to access the external network. 现在, the boards are all operated in the local area network. The board will use the gateway only when it accesses the external network (outside its own network segment). 此外, its own IP and gateway IP must be in the same segment. So if he really want to connect our device to his gateway, and want our device to access across network segments (such as serial port to network port), he can modify the device’s IP to be in the same IP segment as his gateway IP, and modify his gateway IP to end with 1, 例如: 37.0.1.1

His network does not provide the ability to change the gateway IP address. He needs to configure the IP address and gateway on our device, 例如, 设备地址: 37.0.1.12; gateway address: 37.0.1.6.

在过去, our HDMI cvbs to ip video encoder does not have this function, our software engineer is happy to modify this firmware to meet his demand.

升级固件下载

upgrade firmware to set gateway ip on the HDMI cvbs to ip video encoder

If you have any special requirements for our HDMI CVBS To ip video encoder board, please contact us and our engineers will be happy to modify the firmware to meet your requirements.

常问问题