Low Latency H264 H265 SDI AHD to IP Video Encoder with UDP RTSP Streaming
los Vcan1731 Video Encoder Module es un compacto, high-performance H.265/H.264 encoding solution designed for professional video transmission over IP networks. It supports SDI, AHD, and analog (DE) video inputs and converts them into low-latency Ethernet streams for real-time monitoring, transmisión inalámbrica, or embedded system integration.
With ultra-low latency encoding, flexible I/O interfaces, and robust industrial design, this module is ideal for UAV systems, inspección industrial, vigilancia, transmisión, and real-time wireless video links.
Tabla de contenido
Características clave
- Baja latencia H.265 / H.264 hardware video encoding
- Soporta hasta Full HD 1080P @ 60fps
- Multiple video inputs: IDE / AHD / DE (CVBS)
- Ethernet output via RTSP / UDP TS streaming protocols
- Supports simultaneous audio encoding and transmission
- Incorporado AAC stereo audio codec (16-bit, 32Kbps)
- Optional dual input mode: IDE + AHD/AV simultaneous encoding
- Latencia ultrabaja:
- ~200–250ms with H.265 decoder pairing
- ~80–150ms with H.264 low-latency mode pairing
- Integrado UART data transparent transmission over IP
- Web UI and UART-based configuration and management
- Adjustable bitrate control via Web UI or control UART
- Industrial-grade compact design for embedded applications
Descripción general del producto
The Vcan1731 encoder converts SDI or analog video signals into IP-based streams in real time. After encoding, the video stream is transmitted over Ethernet using RTSP or UDP TS protocols, making it suitable for both wired and wireless transmission systems.
Además de vídeo y audio., the module supports one channel of UART data encapsulation, allowing telemetry or control data to be transmitted alongside the video stream. This makes it highly suitable for integrated communication systems such as UAV ground links, robótica, y plataformas de monitoreo remoto.
Vídeo & Audio Specifications
Entrada de vídeo
- IDE (MMCX female connector)
- AHD / CVBS (4-pin PH1.25mm connector)
- Auto-detection or software-controlled switching
- Optional simultaneous SDI + AHD/AV encoding
Supported Resolutions
- 1080pag: 60 / 50 / 30 / 25 / 24 fps (progressive & interlaced)
- 720pag: 60 / 50 / 30 fps
- DE (CVBS): NTSC 720×480 @60i, PAL 720×576 @50i
- AHD: 1080P30 / 1080P25 and similar formats
Codificación de vídeo
- H.265 / H.264 hardware encoding
- Bitrate adjustable via Web UI or UART
- Low-latency H.264 mode using P-frame optimized encoding
Audio
- Embedded SDI audio or analog audio input
- Codificación AAC, estéreo, 16-bit, 32 Kbps
- Audio output supported via Ethernet-decoded stream
Transmisión & Red
- Output formats:
- flujo RTSP
- Transmisión UDP TS
- RTSP + UDP TS simultaneous output
- Ethernet-based IP transmission
- Supports integration with third-party video players and decoders
- AES256 encryption for secure transmission
Control & Gestión
- Web-based UI for full configuration
- UART control interface for embedded integration
- Tasa de bits configurable, resolución, encoding mode, and network parameters
- Firmware upgrade via USB Host interface
UART Data Transmission
The Vcan1731 supports one channel of UART data encapsulation within the video stream. When paired with compatible decoder modules, UART data is transmitted transparently over IP alongside video, habilitando:
- Remote telemetry transmission
- Sensor or control signal integration
- Bidirectional system communication (with compatible decoder systems)
Interface Overview (E/S)
- SDI Input: MMCX female connector
- Analog Video/Audio Input: 4-pin PH1.25mm (AHD / CVBS compatible)
- UART de datos: 3-pin PH1.25mm, TTL 3.3V (adjustable baud rate)
- Controlar UART (CFG): 4-pin PH1.25mm, TTL 3.3V
- Servidor USB: 4-pin PH1.25mm (actualización de firmware / reserved use)
- Salida de audio: 2-pin PH1.25mm (line-out from remote stream)
- Entrada de energía: 2-pin PH2.0mm (7–24 VCC)
- Ethernet: 4-pin PH1.25mm
- FPC Interface: For COFDM or two-way OFDM modulator integration
Indicadores LED
- PWR LED: Power status indicator (solid ON when powered)
- LOCK LED: Lights when valid video signal is detected
- ENC LED: Blinks during active video encoding
Fuente de alimentación
- voltaje de entrada: 7–24 VCC
- El consumo de energía: <320mA @ 12V
- Built-in anti-reverse protection
- Reserved 5V output available for external fan or auxiliary modules
Características físicas
- Dimensiones: 70 × 45 mm (excluyendo conectores)
- Peso: 18.6 gramo
- Compact PCB design for embedded integration
Condiciones ambientales
- Temperatura de funcionamiento: 0°C a +70°C
- Optional extended version: -40°C a +85°C
- Temperatura de almacenamiento: -40°C a +85°C
Aplicaciones típicas
- UAV / drone video transmission systems
- Industrial inspection and robotics
- Wireless live video streaming systems
- Security and surveillance solutions
- Embedded IP video conversion systems
Preguntas más frecuentes
Q: I configured both RTSP and UDP streaming, but there is still no video stream output. What should I check?
UN: Please connect the encoder board directly to your computer using an Ethernet cable.
- Open a web browser and enter: 192.168.1.30
- Log in to the encoder web interface.
- Ir al Vídeo tab/page.
- Compruebe el Aporte información de estado. You should see detected video input information such as: SDI 1080p30, AHD 1080p25, or other video format parameters. This information indicates that the encoder board has successfully detected the SDI/AHD camera video signal.
If no input information is displayed, the issue is related to the video input source. Please check: SDI/AHD camera power supply, Video cable connection, Camera output resolution and format compatibility, Whether the camera is outputting a valid video signal
If the input signal is detected correctly, then the hardware video source is working properly. Próximo, please check the encoder configuration settings, including: RTSP/UDP enable settings, Streaming address and port number, Network IP configuration, Bitrate and encoding parameters, Firewall or network blocking issues, VLC or player decoding settings.
For initial testing, we recommend using VLC Media Player to verify the RTSP stream connection locally before testing UDP multicast or external network streaming.
Q: Why can’t VLC play the UDP stream? Do I need special software?
UN: The UDP stream is not standard MPEG-TS over UDP, but a custom low-latency protocol optimized for real-time transmission. Por lo tanto, VLC may not decode it correctly. We recommend using our SPlayer, which is fully compatible and optimized for ultra-low latency playback. If needed, we can also provide an SDK and technical documentation, allowing customers to develop their own player or integrate the stream into third-party software.
Q: Can the UDP stream be changed to a standard format compatible with VLC or GStreamer? What are the differences between firmware versions?
UN: Sí. Proporcionamos two different firmware versions:
- Engineering (Proprietary Protocol) firmware: Utiliza un custom low-latency UDP protocol, Supports dual video inputs (IDE + AHD/CVBS simultaneous encoding), Requires our SPlayer or SDK-based player integration.
- Estándar (MPEG-TS) firmware: Usos standard MPEG-TS over UDP protocol, Fully compatible with VLC, GStreamer, and other standard players, Supports only one video input (SDI or AHD or CVBS) at a time, Does not support dual-input simultaneous encoding.
Resumen: 1. Elegir proprietary firmware para ultra-low latency + dual-channel encoding. 2. Elegir standard firmware para broad compatibility with VLC/GStreamer.
Q: ¿El sistema admite multidifusión?? ¿Puedo enviar una transmisión a varias IP??
UN: Sí. El sistema admite multidifusión UDP., allowing one stream to be delivered to multiple receivers simultaneously without duplicating the stream per IP. Para usar multidifusión, establecer el IP remota en el lado del remitente a una dirección de multidifusión, Por ejemplo 224.0.0.23. Todos los receptores se unen al mismo grupo de multidifusión utilizando la misma dirección. Del lado del receptor, configurar la misma IP multicast:
- jugador: establezca la IP del grupo en
224.0.0.23 - VLC: abierto
udp://@224.0.0.23:8090
La multidifusión permite la transmisión de uno a muchos dentro de la misma red. La IP real del dispositivo no es crítica; en cambio, delivery depends on network multicast support and devices joining the same group. Nota: Las condiciones de la red pueden afectar el rendimiento. Entornos con VPN, maquinas virtuales, múltiples adaptadores de red, o los conmutadores sin soporte IGMP pueden afectar la recepción de multidifusión.
Unidifusión
firmware
SPlayer Versions
- V1.x: Single-stream playback (standard MPEG-TS firmware) update_image_ts_v1.1t_2025.8.27
- V2.x: Dual-stream playback (proprietary low-latency firmware, IDE + AHD support)
iVcan.com –
The Low Latency H.264/H.265 SDI AHD to IP Video Encoder with UDP/RTSP streaming (Vcan1731) delivers a very impressive and reliable performance. Setup is straightforward thanks to the intuitive Web UI, and configuration via UART is a strong advantage for embedded integration. The real standout feature is the ultra-low latency, which makes real-time monitoring feel smooth and highly responsive, especially in UAV and industrial inspection scenarios. Video quality remains stable even at 1080p 60fps, and switching between SDI, AHD, and CVBS inputs is seamless. Network streaming over RTSP and UDP works consistently, and multicast support is especially useful for multi-view systems. En general, it feels like a well-engineered, industrial-grade solution that balances flexibility, estabilidad, and performance very effectively for professional applications.