Q: Please propose a streaming player that has a stable operation with RTSP stream from a demodulator under 8/10/11 Windows. The player has to restart its playing automatically after interruption of the video stream, reconnecting network connection (reconnection of RJ-45 connector on Demodulator), or RF path interruption.

A: We did not develop the Rtsp player, We have been using EasyPlayer, and some domestic customers also use it, and they have not encountered any problems. In view of the fact that the current Rtsp streaming player, whether it is EasyPlayer or VLC, is not ideal, the only way I can think of is to modify the firmware of the receiving end, use UDP to push the stream to the window pc, and then use our self-developed player to decode (the source code is available for your secondary development), I hope the new player will perform well under your windows pc, you can consult your company's customer opinions (I am afraid that your company's customers will resist our independent The developed player feels unsafe or something).

Q: Can Easyplayer display multiple video streams simultaneously on a single screen?

A: Yes, it supports 1X video streams, 4X video streams, 8X video streams, 16X video streams.

Q: Can Easy Player be integrated with our software?

A: In fact, any software that supports RTSP will work. Easy Player is one option, and its source code is accessible. https://github.com/tsingsee/EasyPlayer

Q: How to know the bandwidth required for an IP camera's network port output through Easy Player?

A: Connect the IP camera to the computer via an Ethernet cable, and input the RTSP video source of your camera on the Easy Player. When the OSD is checked in the player, the top of the screen will display the current network camera's pixels, bit rate, and required bandwidth, such as 1920x1080 25FPS 2Mbps etc. To activate the on-screen display, close and reopen the application. The software has a small bug. Try turning the OSD off and on again.

Do you have a version of Splayer for Linux?

Sorry, no, now only for Windows OS.

The Splayer player is only for UDP, not RTSP?

Yes, For RTSP, we always use Easyplayer. COFDM ( cvbs to IP encoder) is one-way, better to use UDP for lower latency.

How to test the ethernet output?

1. For our video encoder board, there are HDMI CVBS video input and Ethernet RJ45 output. 2. Please connect your video source to our video encoder board input, and connect the net cable from our video encoder board to your PC. 3. At the computer, at the RTSP player, type the address, and then you will get the video online or any worldwide place via the internet.

用于低延迟无线视频发送器和接收器的 RTSP 播放器

1. VLC播放器

如何在VLC播放器上更好地播放视频?

1.1 打开VLC播放器并选择工具->优先

RTSP player for low latency wireless video transmitter and receiver 1

1.2 单击“输入/编解码器”, 在“硬件加速解码”上选择“禁用”, 并保存.

vlc media player configure simple preferences — VLC 媒体播放器配置简单的首选项

2. EasyPlayer 实时播放器

https://github.com/tsingsee/EasyPlayer-RTSP-Win/archive/refs/tags/v3.0.19.0415.zip

我们的工程师和QC同事正在使用这个版本, EasyPlayer-RTSP-Win-v2.1.18.0129.

Q: 请推荐一款能够稳定运行来自解调器的 RTSP 流的流媒体播放器 8/10/11 视窗. 播放器必须在视频流中断后自动重新开始播放, 重新连接网络连接 (重新连接解调器上的 RJ-45 连接器), 或射频路径中断.

一个: 我们没有开发 Rtsp 播放器, 我们一直在使用EasyPlayer, 还有一些国内客户也在用, 他们没有遇到任何问题.

鉴于目前的Rtsp流媒体播放器, 无论是 EasyPlayer 还是 VLC, 不理想, 唯一能想到的办法就是修改接收端的固件, 使用UDP推流到window pc, 然后用我们自研的播放器解码 (源码可供您二次开发), 希望新播放器在你的windows pc下有好的表现, 可以咨询贵司客户意见 (怕你们公司的客户抵制我们独立开发的播放器感觉不安全什么的).

Q: 可以轻松地在单个屏幕上同时显示多个视频流?

一个: 是, 它支持1X视频流, 4X视频流, 8X视频流, 16X视频流.

Q: 可以轻松地与我们的软件集成?

一个: 事实上, 任何支持RTSP的软件都可以正常工作. Easy Player是一个选择, 并且其源代码可访问.
https://github.com/tsingsee/EasyPlayer

Q: 如何通过Easy Player知道IP相机网络端口输出所需的带宽?

一个: 通过以太网电缆将IP摄像机连接到计算机, 并在Easy Player上输入相机的RTSP视频源. 当在播放器中检查OSD时, 屏幕的顶部将显示当前网络摄像头的像素, 比特率, 并需要带宽, 例如1920年×1080 25FPS 2Mbps等.
How to know the bandwidth required for an 500MP 1080p IP camera's network port output through Easy Player
激活屏幕上的显示, 关闭并重新打开申请. 该软件有一个小错误. 尝试再次关闭OSD.