목차
OFDM Technology Introduction
OFDM (Orthogonal frequency-division multiplexing, orthogonal frequency division multiplexing) is a multi-carrier digital modulation technology.
OFDM differs from AM/FM because it can transmit multiple high-speed signals using different frequencies at the same time. The result is bandwidth-efficient use of burst communications amid noise and other interference.
Traditional FDM (frequency division multiplexing) divides the bandwidth into several sub-channels, with guard bands in the middle to reduce interference, and they send data simultaneously. Tuning your receiver to the right station is necessary to watch cable TV or analog wireless broadcasts.
Using interference-free technology makes the use of available spectrum more efficient because guard bands aren’t needed. OFDM systems require much less bandwidth than traditional FDM systems.
OFDM Technical Characteristics
Anti-multipath fading and efficient use of frequency band resources
Based on the cyclic prefix, multipath interference is converted into useful signal multipath reception, reducing the impact of self-coherent interference and inter-symbol interference, and improving the channel’s ability to resist multipath fading. It is particularly suitable for use in high-rise buildings, 인구밀도가 높고 지리적으로 눈에 띄는 장소, 신호가 확산되는 지역과.
Efficient use of frequency band resources
OFDM technology uses FFT/IFFT algorithms to transform frequency domain signals, allowing multiple sub-carrier signals to be transmitted in parallel on a broadband channel, thus improving spectrum utilization efficiency. This is particularly important in wireless environments with limited spectrum resources.
Strong resistance to narrow-band interference
In a single-carrier system, 단일 페이딩 또는 간섭으로 인해 전체 통신 링크가 실패할 수 있습니다., but in a multi-carrier system, only a small portion of the carriers will be interfered with. Error correction codes can also be used for error correction on these sub-channels. This technology can automatically detect which specific carrier under the transmission medium has high signal attenuation or interference pulses, and then take appropriate modulation measures to enable successful communication on the carrier at the specified frequency.
High flexibility
OFDM technology can adjust the number and spacing of sub-carriers in different application scenarios to adapt to different bandwidth requirements and has good flexibility.
OFDM Feature Products
-
22km 55km 80km 100km 150km 장거리 무선 비디오 송신기 수신기 전송 트랜시버 PA 2W 5W 10W -
10W PA 150KM 공중 비디오 데이터 링크 장거리 UAV 무선 전송 송신기 수신기 광대역 전술 손잡이 -
IP 메쉬 임시 트랜시버 OFDM 송신기 수신기 드론 IP 카메라용 무선 비디오 데이터 전송 -
SDI 또는 HDMI-IP 인코더 변조기 CVBS H.265 H.264 인코딩 보드 UAV Drone Robotic 용 pcba 이더넷 RSTP UDP -
IP 메시 비디오 데이터 네트워크 송신기 트랜시버 Ad Hoc 네트워크 광대역 라디오 -
80KM 무선 송신기-수신기 비디오 데이터 RC 전송 시스템 HDMI SDI 장거리 낮은 대기 시간 Vcan1702 -
7KM 무선 비디오 데이터 RC 전송 시스템 장거리 낮은 대기 시간 HDMI SDI 15km OFDM Vcan1643 -
IP 이더넷 RJ45 출력 변조기 H.265 HTTP RSTP UDP ONVIF TCP를 통한 미니 크기 HDMI 인코더 보드
COFDM Technology Introduction
COFDM is coded OFDM (코딩된 OFDM). Some channel coding is added before OFDM modulation (error correction coding and guard interval are added before orthogonal modulation) to make the signal more reliable and effective transmission.
Applications of COFDM
OFDM, as a high-speed transmission technology that can effectively combat interference between signal waveforms, is more widely used in the field of broadband mobile communications. Pure OFDM wireless transmission systems are rarely used in actual systems, and are basically based on COFDM technology, such as DVB (디지털 비디오 방송), LTE (4지), and WIFI.
Early COFDM wireless image transmission equipment mostly used improved DVB solutions, but there were problems such as two-way transmission, 주파수 대역, 비용, 기타, and it is rarely used in the current market. The bottom layer of common ad hoc network technologies on the market is mostly improved from LTE or WIFI technology.
WiFi technology is mainly used in stationary short-range and common applications. Its pilot subcarriers used for channel estimation are relatively sparse (오직 4 pilots under 20Mhz bandwidth). It is not effective in mobile scenarios such as UAV image data transmission and emergency communications. ideal;
LTE is designed for complex high-speed mobile long-distance scenarios, has a high pilot density (200 pilots under 20Mhz bandwidth), has stronger signal recovery capabilities, and is more suitable for areas such as occlusion and high-speed movement.
결론
요약하면, COFDM is coded OFDM, which adds channel coding to OFDM to provide communication system bit error performance. Our ad hoc network is based on LTE underlying technology (channel coding technologies such as OFDM multi-carrier, convolutional coding/TURBO coding) and is optimized and designed for complex scenarios such as drones and emergency communications.
COFDM Feature Products
-
FPV 비디오 송신기 모듈 FPV 카메라 3W PA 50km용 170-860Mhz 무선 RF 오디오 비디오 송신기 -
HDMI 출력 FPV의 COFDM 비디오 송신기-수신기 AV, 무선 10km-15km-30km 장거리 저렴하고 긴 COFDM-912T -
30Km 장거리 COFDM HDMI 무선 비디오 송신기 수신기 UAV Drone 1080P 908T 용 풀 세트 오디오 비디오 TX RX -
카메라용 무선 비디오 송신기 및 수신기, HDMI HD H265 264 인코더 1W/2.5W PA 1080P60 Vcan1726 -
30-밀리초 드론 UAV HDMI 무선 비디오 송신기 초저 대기 시간 무선 전송 시스템 Vcan1729 -
COFDM 변조기 복조기 모듈 인코더 디코더 HDMI CVBS AV 입력 AES 256 FHD RF 스트리밍 -
무선 비디오 전송 RF 주파수 디지털 다운 컨버터 COFDM 전송 주파수 2.4G ~ 600Mhz 낮은 BDC -
COFDM 무선 이더넷 투명 전송 모듈 100M bps RJ45 FDD 비디오 데이터 송신기 및 수신기 -
COFDM IP 무선 비디오 데이터 송신기 모듈 단방향 이더넷 투명 전송 네트워크 포트 vcan1816



















질문하기
응답해 주셔서 감사합니다. ✨