IP MESH Ad Hoc 네트워크 사용 설명서

IP MESH Ad Hoc 네트워크 사용 설명서

      Version number: iVcan-20230606

Brief introduction

  • Our Ad hoc network communication radio station, as a mobile self-organizing network, supports any network topology.
  • Unlike traditional wireless networks, it is a wireless broadband system with no center, 분산, 다중 홉 릴레이, 동적 라우팅, 강력한 무적, and good scalability.
  • Some routing protocols complete the wireless communication between nodes through wireless multi-hop forwarding.
  • 효율적인 MAC 계층 전송 프로토콜과 2계층 라우팅 프로토콜을 갖춘 임시 분산 광대역 무선망 전송 시스템.
  • All nodes are completely equal, without any infrastructure, and can quickly build a dedicated self-organizing network between mobile nodes, provide instant adaptive communication, have excellent broadband performance, and support the real-time transmission of multimedia information such as video coding and audio coding.
  • The system technology has the advantages of strong anti-interference ability, 높은 스펙트럼 효율, 긴 전송 거리, 퇴색 방지 능력, 그리고 강한 회절 능력.
  • 복잡하고 가시선이 없는 환경에서 실시간 고품질 무선 양방향 데이터 전송 기능을 실현할 수 있습니다..

Technical Features

IP MESH Ad Hoc network
IP MESH Ad Hoc network
  • There is no need to set up a central station and complex system configuration. After the site is powered on, 자동으로 네트워크가 형성됩니다, 통신은 다음에서 시작될 수 있습니다. “초”;
  • 임의의 토폴로지, 다중 홉 릴레이, 릴레이 전달;
  • 각 노드의 논리적 속성을 유연하게 구성 가능;
  • 현재, the same frequency network can support the interconnection of ≥32 nodes;
  • 채널이 AES로 암호화되었습니다.;
  • The system data bandwidth peak value is 90Mbps;
  • 강력한 간섭 방지 능력, 높은 스펙트럼 효율, 긴 전송 거리, 간섭 방지
  • Strong falling ability and diffraction ability

기술적 인 매개 변수

  • 통신빈도: 1412~1452MHz, adjustable in 5MHz steps;
  • 전송 전력: 2*30dBm의 (2*1W), 1dBm 단계 조절 가능。
  • 대역폭 모드: 5 / 10 / 20 메가 헤르츠;
  • 변조 방식: 다중 반송파 TDD-COFDM;
  • 캐리어 변조: BPSK/QPSK/16QAM/64QAM (적응형 또는 고정형);
  • 수신 감도: -98dBm @ 10MHz;
  • Communication distance: 30km (ground-air/air-air line-of-sight), 8km (ground-ground line-of-sight);
  • Communication rate: peak 90Mbps (적응형);
  • 전송 지연: Single jump about 2ms；
  • Multi-hop capability: 까지 8 video jumps;
  • Start time: ≤25S;
  • 네트워크 접속 시간: 미만 1 초;
  • 라우팅 전환: 미만 1 초;
  • 데이터 인터페이스: 네트워크 포트 x 2, RS232 x 2;
  • 전력 소비: 2~8W
  • 보호 수준: IP65;
  • 작동 온도: -40~ + 70 ℃;
  • 치수: 길이: 72.8mm*width 47.3mm*height 17.9mm
  •  무게: 78지

Software operation Instructions

Support 5M, 10엠, and 20M bandwidth, real-time graphical interface display, real-time map indication, 기타.

The software disables DHCP by default, and the default IP address is 192.168.17.1 If you forget the address, please connect the 9th pin of the 26PIN cable to the ground to reset the parameters.

Enter the IP address of the module in the browser, and the default username and password are both admin. It takes about 20s for the module to connect to the network from power-on. The recommended browser is Chrome.

After entering, it defaults to simple mode, click expert mode to unlock more settings, suitable for professional debugging.

Status section:

IP MESH Ad Hoc network user guide 1

개요:

IP MESH Ad Hoc network user guide 2

Topology map: (automatic refresh is turned off by default to save bandwidth, you can check automatic refresh)

IP MESH Ad Hoc network user guide 3

Check only the display path, you can know the direct jump point relationship of each module

IP MESH Ad Hoc network user guide 4

Check the details to judge the data connection status of each module. These are displayed dynamically in real time

IP MESH Ad Hoc network user guide 5

Click Details: You can know the specific situation of each module directly:

IP MESH Ad Hoc network user guide 6

Terminal state:

IP MESH Ad Hoc network user guide 7

Ad hoc network: You can remark the name, 물론이야, it can also be operated in the terminal state.

IP MESH Ad Hoc network user guide 8

Spectrum scanning: Check the interference of each frequency band. 물론, the frequency bands of different modules are purchased, and the scanning frequency bands are different.

IP MESH Ad Hoc network user guide 9

Map: (물론, to know the location information of each terminal, GNSS modules such as GPS or Beidou need to be installed)

Support tile maps, image maps, network maps, 기타.

IP MESH Ad Hoc network user guide 10

Configuration section

방법: 1. MESH node or bridge configuration

IP MESH Ad Hoc network user guide 11

2. Wireless configuration:

IP MESH Ad Hoc network user guide 12

2.1 Transmission power configuration, the power of different products purchased is different.

채널 대역폭: 5M 10M 20M 40M

채널: Different channels are used to purchase different products

The coverage distance (미터) needs to be filled in according to the actual situation. If it is set to 3000 미터, it is impossible to actually run to 5000 미터.

Number of Antennas 2

Fixed MCS rate: Can be set to off for automatic selection. If you want stable transmission, it is recommended to set the manual, 범위 (MCS0 to MCS15)

대역폭, 조정, 율

Limit MCS rate: It is recommended to enable it. After enabling it, if the fixed rate is MCS4, the software will automatically select the best modulation method from MCS0 to MCS4 during the test.

5엠10엠20엠40엠
MCS0BPSK 1/21.7엠3.3엠6.5엠13.5엠
MCS1QPSK 1/23.2엠6.5엠13엠27엠
MCS2QPSK 3/44.8엠9.8엠19.5엠40.5엠
MCS316QAM 1/26.5엠13엠26엠54엠
MCS416QAM 3/49.7엠19.5엠39엠81엠
MCS564QAM 2/313엠26엠52엠108엠
MCS664QAM 3/414.5엠29엠58.5엠121엠
MCS764QAM 5/616엠32.5엠65엠135엠
MCS8BPSK 1/23.2엠6.5엠13엠27엠
MCS9QPSK 1/26.5엠13엠26엠54엠
MCS10QPSK 3/49.7엠19.5엠39엠81엠
MCS1116QAM 1/213엠26엠52엠108엠
MCS1216QAM 3/419.5엠39엠78엠162엠
MCS1364QAM 2/326엠52엠104엠216엠
MCS1464QAM 3/429엠58.5엠117엠243엠
MCS1564QAM 5/632.5엠65엠130엠270엠

From MCS0 to MCS7, two wireless ports send the same data in order to improve stability during the movement.

From MCS8 to MCS15, the two wireless ports send different data, which can make the rate X2

If it is in a mobile state, it is recommended to use BPSK or QPSK to transmit data. 16QAM and 64QAM are suitable for use with fixed transmission.

If MCS8 to MCS15 is used, it is recommended that the antennas of the two ports be 90 degrees from each other, 예를 들면, one is vertical and the other is horizontal.

If drones are used, MCS0 to MCS2 is recommended.

The greater the bandwidth, the lower the sensitivity. The same goes for modulation.

above rate unit bps

3. 회로망:

IP MESH Ad Hoc network user guide 13

4. User management:

IP MESH Ad Hoc network user guide 14

5. 체계

IP MESH Ad Hoc network user guide 15

6. Tools Configure serial port, GPS/Beidou/GNSS, 4G/5G access, and other parameters

IP MESH Ad Hoc network user guide 16

6.1 Multi-device management, in the upper right corner, you can log in and manage users remotely, and it is also a real-time dynamic interface display or map display.

IP MESH Ad Hoc network user guide 17
IP MESH Ad Hoc network user guide 18

6.2 Serial port software settings:

IP MESH Ad Hoc network user guide 19

Select Expert Mode, 도구, and UART Interface.

IP MESH Ad Hoc network user guide 20

choose new

IP MESH Ad Hoc network user guide 21

주의, if you use the serial port to transmit serial data, you have to choose ttyS0 (COM1 of hardware) and ttyUSB0 (COM2 of hardware), ttyATH0 is invalid, 방법: 회로망

전송 속도 115200, 정지 비트 1, parity none.

이름 1, protocol UDP, IP address, 192.168.55.100 (the IP address here is the IP address of the other device, 예를 들면, input the IP of the computer for the computer, and input the IP of the device for the device).

포트 20005, 20003. Choose a port number

The computer’s IP is set to a fixed 192.168.17.100

IP MESH Ad Hoc network user guide 22

Short the TX RX pins of COM1 and COM2 of the device.

IP MESH Ad Hoc network user guide 23

Use the TCP UDP test tool to fill in the IP and port of the device.

Send it to loop back the data.

회신을 남겨주

귀하의 이메일 주소는 공개되지 않습니다. 필요 입력 사항은 표시되어 있습니다 *

다음에서 더 자세히 알아보세요. iVcan.com

계속해서 읽고 전체 아카이브에 액세스하려면 지금 구독하세요..

계속 읽기

WhatsApp에 대한 도움이 필요합니다?