COFDM DVB-T ダイバーシティ ワイヤレス ビデオ レシーバー、HDMI AV IP ストリーム RTSP UDP 出力付き

COFDM DVB-T ダイバーシティ ワイヤレス ビデオ レシーバー、HDMI AV IP ストリーム RTSP UDP 出力付き

特徴

1. Dibcom 9090 Demodulator Tuner Chipset

   • サポート diversity reception for improved stability and signal quality.

   • と互換性があります DVB-T COFDM standard のみ (does ない support DVB-T2).

2. ビデオ出力オプション

   • サポート HDMI digital video output.

   • サポート CVBS analog video output for legacy devices.

3. Network Streaming

   • 統合された RJ45イーサネットインターフェース.

   • サポート RTSP and UDP video streaming for IP network applications.

DiBcom and Sony tuner chipset support diversity, but stopped to produce. So the cost is not cheaper.

カスタマイズ可能なオプション

1. Video Output Configuration

   • Choice between HDMI digital output, CVBS analog output, または両方.

   • Resolution and frame rate settings for HDMI output.

2. Network Streaming Options

   • Enable or disable RTSP streaming.

   • Enable or disable UDP streaming.

   • Custom network port configuration for RTSP/UDP streams.

3. チューナー & Reception Settings

   • Frequency band selection within DVB-T range.

   • Add frequency down converter to support 860-6000MHz.

   • Adjustable RF gain or sensitivity settings.

   • Diversity reception options (single vs. dual antenna configuration).

4. 物理的な & インターフェースオプション

   • Housing type and size (例えば, コンパクト, rack-mount).

   • Connector types for HDMI, CVBS, およびイーサネット.

   • Optional external antenna connectors for enhanced reception.

5. ファームウェア & ソフトウェアのカスタマイズ

   • Custom GUI or web interface branding.

   • Pre-configured channel lists or scanning behavior.

   • Integration with existing IP monitoring or NVR systems.

6. 電源オプション

   • 電圧範囲のカスタマイズ (例えば, 5V, 12V, POE support).

   • Power-saving modes or remote power control.

よくある質問

1. Why doesn’t the second LED flash?
   
   I just connected the second receiver (受信), but it is not receiving any signal. The HDMI output displays the logo correctly, and all configuration settings appear to be correct. しかし, I noticed that the bottom green LED labeled 録音 is not blinking, whereas on the previously working receiver, the REC LED blinks normally. Could you help me understand why this is happening?
   The light at the bottom is the recording LED. Earlier firmware versions used fast flashing and slow flashing to indicate recording status. Customer feedback suggested this wasn’t clear enough, so we’ve switched to off and on to indicate recording status. This LED only indicates the recording status; don’t overly focus on it; その代わり, pay attention to the working status indicator above.

   

2. Why does one of my two COFDM wireless video receivers work fine, while the other one doesn’t receive any channels?
   

   

   

   Please observe carefully. The operating frequency of the second HDMI wireless video receiver is not 340MHz. It is actually changed to 3400MHz, which is equivalent to 3.4GHz. Please change it to 340MHz. The frequency is within the range supported by COFDM and it should work normally.
3. Why does it take 5 minutes from powering on the machine to seeing the boot logo on HDMI ( Fighter Jet)?
   The engineer said that if there is a problem with the power supply, there is a watchdog on our board that will detect an unstable power supply and will repeatedly try to restart. It is likely a power-on startup problem. You can observe whether the red light on the board is flashing. Or take a video for us. A working COFDM video receiver takes only 10 seconds from booting up to seeing the HDMI and CVBS boot screens. https://youtu.be/H1tpzDId45o
4. What is the COFDM DVB-T Diversity Wireless Video Receiver?
   It is a professional-grade wireless video receiver using the Dibcom 9090 Demodulator Tuner Chipset, supporting DVB-T COFDM standard with diversity reception for stable, 長距離, 低遅延ビデオ伝送.
5. Does this wireless video receiver support DVB-T2?
   いいえ, it supports DVB-T COFDM only, not DVB-T2.
6. What is diversity reception, and why is it important?
   Diversity reception uses dual antennas to improve signal stability, reduce dropouts, and enhance video quality in challenging environments.
7. What video outputs are available?
   It supports HDMI digital output, CVBS analog video output, and RJ45 output ethernet video stream by RTSP or UDP, making it compatible with both modern and legacy devices.
8. Can it output video over IP networks?
   はい, it supports RTSP and UDP streaming via Ethernet (RJ45インターフェース), ideal for IP-based applications.
9. What video resolution does the receiver support?
   It supports up to 1080P@60 real-time decoding with low latency H.265/H.264 decoding.
10. What kind of audio and video inputs does it support?
    It can handle HDMI and AV input encoding from the transmitter, and provides audio decoding output.
11. Can it process two video inputs simultaneously?
    はい, it can optionally encode HDMI + AV inputs at the same time, though the default is single input (HDMI or AV).
12. How is the device configured?
    You can configure it via Web UI, UARTシリアルポート, or AT commands.
13. What is the supported working frequency range?
    It supports 160MHz~860MHz, with configurable center frequency. With the support of down-conversion, 160-6000MHz can also be supported.
14. Is the wireless bandwidth adjustable?
    はい, the bandwidth is fully configurable, supporting different transmission requirements.
15. What is the sensitivity of the dual antenna reception?
    The sensitivity is -100±1dBm (QPSK, 8MHz帯域幅).
16. Can the device display wireless status on screen?
    はい, via OSD (オンスクリーンディスプレイ), showing parameters like signal strength, ビットレート, 頻度, 帯域幅, 等.
17. What kind of latency does the receiver achieve?
    Video latency can be as low as 60–130ms, depending on resolution and bitrate.
18. Does it support video decryption?
    はい, it can decrypt video streams if the transmitter uses encryption.
19. Can I record video directly on the receiver?
    はい, it supports recording to TF card or USB disk.
20. Does it support transparent serial data transmission?
    はい, it provides a data serial port for transparent transmission, allowing command/control data to pass through.
21. How much power does the receiver consume?
    Power consumption is about 230mA @ 12V.
22. What power input does it support?
    The receiver accepts 6V~15V DC input.
23. What are the device dimensions and weight?
    It measures 115 × 90 x 34mm and weighs 243 グラム.
24. What antenna connectors are used?
    It uses SMA external threaded inner hole connectors.
25. What indicators are available on the device?
    It has Power (PWR), リンク, and REC indicators.
26. How does the REC indicator work?
    It flashes slowly when recording video and quickly when idle.
27. What is the maximum wireless range of this receiver?
    With optimal conditions, it can achieve up to 16km transmission distance (using UAV and 1W transmitter).
28. How does the environment affect transmission distance?
    Factors such as interference, 障害物, 頻度, and antenna gain affect performance.
29. What video codecs are supported?
    It supports H.264 and H.265 decoding.
30. Can I connect the receiver to a mobile phone or tablet?
    はい, via USB output, it can stream to smartphones and tablets for decoding.
31. Can I adjust the encoding bitrate?
    はい, the video bitrate is dynamically configurable.
32. Does it support audio output?
    はい, both HDMI and CVBS (AL/AR) support audio output.
33. Can the OSD display be turned off?
    はい, you can enable/disable OSD with the OSD button or output via serial port.
34. What happens if the signal is lost?
    The receiver will display “Disconnected, no signal” until the link is restored.
35. Does it support AES encryption?
    はい, it supports AES encryption/decryption, depending on transmitter settings.
36. Can the receiver upgrade firmware?
    はい, via TF card interface for software updates.
37. Can the receiver output video simultaneously to multiple devices?
    はい, it supports HDMI, CVBS, and USB simultaneous outputs.
38. What is the air interface rate (空気)?
    It is the wireless transmission data rate, displayed in real time on OSD.
39. Can I monitor BER (ビットエラー率)?
    はい, BER per antenna is displayed on OSD or via serial port.
40. Is it suitable for UAV drone video transmission?
    はい, it is commonly used for drone and ground station applications.
41. Can I use it for vehicle-mounted video transmission?
    はい, it works for mobile video links, even in urban environments.
42. Is this receiver good for long-range surveillance?
    はい, it supports stable, 長距離, low-latency wireless surveillance video.
43. Does it support low latency live video streaming?
    はい, it is optimized for real-time, low-latency video applications.
44. What kind of users typically need this device?
    It is ideal for UAV operators, 放送専門家, 監視, and robotics applications.
45. Can it be integrated with IP video platforms?
    はい, via RTSP/UDP network streaming, it integrates easily with NVRs and IP video systems.
46. Does the device have a built-in web interface?
    はい, it provides a Web UI for remote configuration.
47. Can I use serial port commands for advanced settings?
    はい, via UART AT commands.
48. What accessories are typically used with this receiver?
    Optional common accessories include fiberglass omnidirectional antennas, 八木アンテナ, and input / output cable.
49. Is the receiver portable?
    はい, with its compact 243g design, it is lightweight and portable.
50. Does it support both fixed and mobile applications?
    はい, it is suitable for both stationary ground receivers and mobile vehicle/UAV operations.
51. How do I know if the receiver is recording video?
    The REC LED indicator flashes to show recording status.
52. Can I customize the frequency and bandwidth?
    はい, you can configure working frequency, 帯域幅, and other wireless parameters.
53. Why should I choose this receiver over others?
    Because it combines DVB-T COFDM diversity reception, HDMI/AV/IP outputs, 超低遅延, 録音, 暗号化, and UAV compatibility—all in a compact, professional-grade design.
54. I have 1776-Rx with no CVBS and HDMI out. Would you send the schematic so I can verify the voltage?
    You should also look at other potential issues. Is the transmitter functioning correctly, and is it receiving video input while powered on? What is the current of Rx when it is turned on? をご確認ください。 Vcan1776-RX schematic here. SMTT SMTB
55. How do I replace the broken IC chip on the back of the wireless video transmitter?

相対ポスト

1. How to make SD upgrade card for wireless video receiver?
2. How to resolve the issue of not being able to record video using an SD card on a COFDM HDMI receiver.
3. COFDM Receiver Configuration and Streaming Protocol Guide
4. COFDM ワイヤレス ビデオ トランスミッター デコーダー レシーバー ボード経由でユーザー定義の OSD メニュー フライング データをオーバーレイ送信する方法
5. COFDM モジュールのパラメータ設定 UART AT コマンド