如何配置无人机视频数据空气发射器和接地接收器

如何配置无人机视频数据空气发射器和接地接收器, 合适的下面型号.

drone video data telemetry transmitter-receiver UAV radio link

无线视频传输

无人机视频数据遥测发射机接收器无线电链路TDD收发器

Best-Drone-Radio-Transmitter-and-Receiver-Module-for-video-data-telemetry

TX RX 模块

视频数据遥测的最佳无人机无线电发射器和接收器模块

$380.00

如何配置无人机视频数据空气发射机

How to set air unit UAV video data transmitter — 如何设置空气单元无人机视频数据发射器

master is central node means ground receiver slave is access node means air transmitter — 主是中央节点的主节点接收器从属访问节点是指空气发射机

please set same id if you want to pair transmitter and receiver — 如果要配对发射器和接收器，请设置相同的ID

The output power amplifier can be set to less than 2 watts — 输出功率放大器可以设置为小于 2 瓦

Optional encryption method SNOW3G AES ZUC — 可选的加密方法Snow3G AES ZUC

Customize the IP address of the device and ensure in the same network segment — 自定义设备的IP地址并确保在同一网络段中

Advanced settings of frequency and time slot on the air side — 空气侧频率和时间插槽的高级设置

Please make sure the master and slave time slots are the same — 请确保主插槽相同

Set the start frequency of the operating frequency range — 设置工作频率范围的起始频率

Set the end frequency of the operating frequency range — 设置运行频率范围的终点

Query wireless status including frequency RSSI SNR NOISE MSC PER TPER distance — 查询无线状态，包括频率RSSI SNR噪声MSC每提款距离

Data serial port definition settings — 数据序列端口定义设置

Supported protocols are TCP and UDP — 支持的协议是TCP和UDP

Supported baud rates include 9600, 19200, 38400, 57600, 115200, 230400, and 460800 — 支持的波特率包括 9600, 19200, 38400, 57600, 115200, 230400, 和 460800

Check the status of the serial port, such as the amount of data sent and received — 检查串行端口的状态, 例如发送和接收的数据量

Send AT commands to get more function information — 发送命令以获取更多功能信息

Upgrade your UAV's video data transceiver — 升级无人机的视频数据收发器

Modify the username and password of the web UI management page — 修改Web UI管理页面的用户名和密码

Query the hardware and software information of the current device — 查询当前设备的硬件和软件信息

如何配置无人机视频数据接地接收器

How to set role ID bandwidth tx power encryption ip address of ground receiver — 如何设置角色ID带宽TX功率加密IP地址的IP地址

drone ground receiver is master and air transmitter is slave — 无人机接地接收器是主机，空气发射器是奴隶

Only the same ID can be used for pairing — 只能使用相同的ID进行配对

Optional transmission wireless bandwidth 3MHz 5MHz 10MHz 20MHz — 可选的传输无线带宽3MHz 5MHz 10MHz 20MHz

Optional transmission power output from 10-33 dBm — 可选的传输功率输出 10-33 dBm的

Optional transmission max throughput auto 4-8-10-15-20-25-30Mbps — 可选传输最大吞吐量自动4-8-10-15-20-25-30Mbps

Optional data encryption method SNOW3G AES ZUC — 可选数据加密方法Snow3G AES ZUC

Set the IP address + must in the same network segment with the air transmitter — 设置IP地址 + 必须在同一网络段中使用空气发射机

Frequency hopping off then you can fix a working frequency — 频率跳跃，然后您可以修复工作频率

time slot set on 1up4down for p2p or 2Up3Down for relay networking — P2P或2UP3Down的1UP4Dows设置的时间插槽用于中继网络

FHSS on or off to allow frequency hopping to avoid jamming — FHSS打开或关闭以允许频率跳跃以避免干扰

Manually enter the start frequency of the transmission frequency range — 手动输入传输频率范围的起始频率

Manually enter the end frequency of the transmission frequency range — 手动输入传输频率范围的最终频率

wireless status for RSSI SNR and transmission distance — RSSI SNR和传输距离的无线状态

four serial ports can set baud rate and port number — 四个串行端口可以设置波特率和端口号

local node serial data or all nodes serial data — 本地节点序列数据或所有节点序列数据

chooses UDP or TCP serial protocol — 选择UDP或TCP串行协议

Change the baud rate according to the flight controller or device specifications — 根据飞行控制器或设备规格更改波特率

Check the status of data transmission and reception for the transmitter and receiver — 检查发射器和接收器的数据传输状态和接收

AT commands can be used to query or execute additional functions — AT命令可用于查询或执行其他功能

It can be upgraded to the latest firmware — 它可以升级到最新的固件

Set a password for the admin panel to prevent unauthorized access and modifications — 为管理面板设置密码以防止未经授权的访问和修改

Check the hardware software and firmware version of the device — 检查设备的硬件软件和固件版本

drone video data telemetry transmitter-receiver UAV radio link

无线视频传输

无人机视频数据遥测发射机接收器无线电链路TDD收发器

Best-Drone-Radio-Transmitter-and-Receiver-Module-for-video-data-telemetry

TX RX 模块

视频数据遥测的最佳无人机无线电发射器和接收器模块

$380.00

问一个问题

感谢您的回复。 ✨