SE10 视频编码器设备

— 低延迟 H.265/H.264 视频编码器设备, 全高清分辨率, 最大1080P60编码
— Audio codec with audio input and output
— Mini HDMI/SDI/AHD/AV video input, Ethernet RTSP/TS stream output, TCP/UDP protocol
— Web UI for management
— 选修的: HDMI+AV or SDI+AHD input and encoding at the same time
— 选修的: 4K video input and 4K encoder, maximum resolution 3840*2160@30fps
— When paired with the SHD5 decoder module, the H.265 video latency is about 200ms to 250ms
— When paired with the SHD4 decoder module and in the lowest H.264 mode, the video latency is about 50ms to 130ms

SE10 video encoder device implements H.265/H.264 video encoding and audio codec, the stream will output via Ethernet after encoding. One channel uart data can also be packed with the stream and output to the Ethernet. The video encoding bitrates are controlled via web UI. The SE10 device is in compact size and suitable for real-time live video monitor via wireless link or Ethernet. 我们有两个型号:
    * SE10-HDMI, Mini HDMI/AV video input
    * SE10-SDI, SDI/AHD video input

Video and audio input of SE10-HDMI:

Mini HDMI connector for HD video input, 4PIN ZH1.5mm connector for AV input. SE10-HDMI supports one-channel video input and encoding with default firmware. The system will auto-detect the input video after the system’s start-up. When HDMI video and AV video are connected in, the HDMI input or the specified input (via Web UI) is a priority. SE10-HDMI can also support both HDMI input and AV input and encode two-channel videos at the same time with specified firmware.

• Support HDMI video input formats: 1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@50我, 1080@30I, 720@60P, 720@50P, 720@30P, ……
• Support AV video input formats: 720*480 60我(NTSC), 720*576 50我(朋友)
• 视频编码: H.265/H.264, setup via Web UI
• Video encoding bitrates adjustable via Web UI
• Supports proprietary H.264 video compression only using p-frames for the lowest latency(the encoding and decoding latency is about 50ms to 130ms when working with the SHD4 decoder module).
• When paired with the SHD5 decoder module, the H.265 encoding/decoding video latency is about 200ms to 250ms.
• 音频输入: embedded HDMI or analog audio
• 音频编码: 亚克力, 16位, 立体声, 32千比特每秒

4K hardware version of SE10-HDMI is also available, this version supports 4K video input and encoding, the maximum input is 3840*2160@30fps.

Video and audio input of SE10-SDI:

SMA female connector for SDI HD video input, 4PIN ZH1.5mm connector for AHD input. The AHD input is AV-compatible. SE10-SDI supports one-channel video input and encoding with default firmware. The system will auto-detect the input video after the system start-up. When SDI video and AHD video are connected in, the SDI input or the specified input (via Web UI) is a priority. SE10-SDI can also support both SDI input and AHD input and encode two-channel videos at the same time with specified firmware.

• Support SDI video input formats: 1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@50我, 1080@30I, 720@60P, 720@50P, 720@30P, ……
• Support AHD video input formats: 1080P30, 1080P25, ……
• Support AV video input formats: 720*480 60我(NTSC), 720*576 50我(朋友)
• 视频编码: H.265/H.264, setup via Web UI
• Video encoding bitrates adjustable via Web UI
• Supports proprietary H.264 video compression only using p-frames for the lowest latency(the encoding and decoding latency is about 80ms to 150ms when working with the SHD4 decoder module).
• When paired with the SHD5 decoder module, the H.265 encoding/decoding video latency is about 200ms to 250ms.
• 音频输入: embedded SDI or analog audio
• 音频编码: 亚克力, 16位, 立体声, 32千比特每秒

输入/输出信号

数据串口

3PIN ZH1.5mm 连接器, RS232 by default (can be modified to TTL3.3V before ship out). This uart data will be packed with the video stream and output to the Ethernet. When the SE10 module works paired with the decoder module (SHD5, SHD4, SHD3, SHD1, ETC。) and Ethernet linker (无线或有线), the data to this uart will be transferred to the data uart of the decoder module.

SPK interface

2PIN ZH1.5mm 连接器. When SE10 is paired with a video decoder module, the SE10 system is capable to decode the audio stream from the video decoder module which is received via an Ethernet port with a wire or wireless connection, and the audio will output to a speaker. This interface is used for connecting the speaker. It can drive a 1W speaker directly.

以太网接口

4PIN ZH1.5mm 连接器, RTSP/TS stream output, TCP/UDP protocol, setup by Web UI.

电源输入

XT30PW-M 连接器
输入范围: 7～24VDC
功耗: <220毫安@12V

物理特性

外形尺寸: 72.5*48*15.4毫米 (not including connectors out of the case)
重量: 53G