150km TDD MIMO FHSS 無人機 IP RF 無線電鏈路 雙向

這是雙向 150 公里 TDD MIMO FHSS 無人機 IP 射頻無線電鏈路.

技術要求

Equipment is required to implement a wireless communication channel, preferably TDD, MIMO 2×2, operation under BLOS conditions (possibly with restrictions). One set of equipment should include from one to three devices that should provide point-to-point and point-to-multipoint communication. The main requirements are given in the table.

№	範圍	要求	筆記
1	頻率範圍 (UL/DL)	0.3 – 1 百萬赫 300-1000 兆赫茲 或者 3-6 千兆赫 3000-6000 兆赫茲	Uplink/Downlink Frequency
2	Information transmission rate total rate (DL+UL)	≥0.3 Mbit/sec at SNR(SINR) -30 分貝 ≥1,5 Mbit/sec at SNR(SINR) __ dB ≥3 Mbit/sec at SNR(SINR) ___ dB	SNR vs throughput values ​​need to be discussed depending on the chosen hardware implementation and other parameters.
3	Bandwidth	≥250 MHz	Must be determined based on the manufacturer’s signal processing structure.
4	FHSS	≥300 hopps/sec
5	輸出功率	20W, 100W	It should be possible to scale the power from 20 進入這個 100 W, possibly using an external additional amplifier.
6	MCS	not less than BPSK	It should be possible to manually change the MSC.
7	碼率	適用	It should be possible to manually change the MSC.
8	電源電壓	Unipolar 12-30V
9	Receive/transmit delay	≤50 msec
10	介面	乙太網路	TCP/IP, UDP support must be provided.
11	Speed range	最多 150 公里/小時
12	天線增益	≥6 dBi	The equipment must include an antenna.
13	重量	最多 4 公斤.	With amplifier no more than 10 公斤.
14	加密	+	AES