150km TDD MIMO FHSS Drone IP RF Radio link two-way

Here is a two-way 150km TDD MIMO FHSS Drone IP RF Radio link.

Technical requirements

Equipment is required to implement a wireless communication channel, preferably TDD, MIMO 2×2, operation under BLOS conditions (possibly with restrictions). One set of equipment should include from one to three devices that should provide point-to-point and point-to-multipoint communication. The main requirements are given in the table.

№	Parameter	Requirement	Note
1	Frequency range (UL/DL)	0.3 – 1 GHz 300-1000 Mhz or 3-6 Ghz 3000-6000 Mhz	Uplink/Downlink Frequency
2	Information transmission rate total rate (DL+UL)	≥0.3 Mbit/sec at SNR(SINR) -30 dB ≥1,5 Mbit/sec at SNR(SINR) __ dB ≥3 Mbit/sec at SNR(SINR) ___ dB	SNR vs throughput values ​​need to be discussed depending on the chosen hardware implementation and other parameters.
3	Bandwidth	≥250 MHz	Must be determined based on the manufacturer’s signal processing structure.
4	FHSS	≥300 hopps/sec
5	Output power	20W, 100W	It should be possible to scale the power from 20 W to 100 W, possibly using an external additional amplifier.
6	MCS	not less than BPSK	It should be possible to manually change the MSC.
7	Code Rate	applies	It should be possible to manually change the MSC.
8	Supply voltage	Unipolar 12-30V
9	Receive/transmit delay	≤50 msec
10	Interface	Ethernet	TCP/IP, UDP support must be provided.
11	Speed range	Up to 150 km/h
12	Antenna gain	≥6 dBi	The equipment must include an antenna.
13	Weight	Up to 4 kg.	With amplifier no more than 10 kg.
14	Encryption	+	AES