150km TDD MIMO FHSS Drone IP RF Liên kết vô tuyến hai chiều

Đây là liên kết vô tuyến IP RF Drone TDD MIMO FHSS hai chiều dài 150km.

Yêu cầu kỹ thuật

Equipment is required to implement a wireless communication channel, preferably TDD, MIMO 2×2, operation under BLOS conditions (possibly with restrictions). One set of equipment should include from one to three devices that should provide point-to-point and point-to-multipoint communication. The main requirements are given in the table.

№	tham số	Requirement	Ghi chú
1	Dải tần số (UL/DL)	0.3 – 1 GHz 300-1000 Mhz hoặc 3-6 ghz 3000-6000 Mhz	Uplink/Downlink Frequency
2	Information transmission rate total rate (DL+UL)	≥0.3 Mbit/sec at SNR(SINR) -30 dB ≥1,5 Mbit/sec at SNR(SINR) __ dB ≥3 Mbit/sec at SNR(SINR) ___ dB	SNR vs throughput values ​​need to be discussed depending on the chosen hardware implementation and other parameters.
3	Băng thông	≥250 MHz	Must be determined based on the manufacturer’s signal processing structure.
4	FHSS	≥300 hopps/sec
5	Công suất đầu ra	20W, 100W	It should be possible to scale the power from 20 W to 100 W, possibly using an external additional amplifier.
6	MCS	not less than BPSK	It should be possible to manually change the MSC.
7	Tỷ lệ mã	áp dụng	It should be possible to manually change the MSC.
8	điện áp cung cấp	Unipolar 12-30V
9	Receive/transmit delay	≤50 msec
10	Giao diện	Ethernet	TCP/IP, UDP support must be provided.
11	Speed range	Lên đến 150 km/giờ
12	Độ lợi anten	≥6 dBi	The equipment must include an antenna.
13	Weight	Lên đến 4 kg.	With amplifier no more than 10 kg.
14	Mã hóa	+	AES