Fluxo de vídeo IP para caixa inferior de latência do decodificador CVBS HDMI
Índice
Recurso
- This H.264 decoder supports high-definition video output at resolutions up to 1920×1080 no 60 quadros por segundo.
- It has Ethernet input and HDMI/AV output.
- Record video to a Micro SD card or USB drive.
- Manage this video decoder box via web UI or UART.
- With our encoder module, typical video latency is around 200 milissegundos.
- Suporta descompressão de vídeo H.264 proprietária, usando apenas quadros p para latência mais baixa, de 50ms a 130ms
- The VCAN2095 uses H.264 to decode video and audio; Ethernet input video is decoded and output through HDMI and AV. The input video stream may also be UDP-TS or RTSP video.
- It offers a variety of comprehensive signal outputs, including 1080p/720p HD video, vídeo de monitor HD CVBS convertido para baixo, and dual analog audio.
- The VCAN2095 DVR function records to a Micro SD card or USB drive, controlled by a switch.
- The VCAN2095 also features a built-in RTSP server, allowing video streaming over Ethernet to remote software or hardware decoders (opcional).
- This compact device is ideal for embedded applications and real-time live video monitoring over wireless or Ethernet.
- Using our video encoder, two-way wireless linker, and the VCAN2095 video decoder, the 1080p60 video signal experiences roughly a 200ms delay from input to HDMI output.
- In low-latency mode (using proprietary H.264 video decompression with only p-frames), the total latency is approximately 50~130ms.
Especificação:
OI
| Saída de vídeo HD | Conector HDMI tipo A |
| Saída de vídeo composto | Conector RCA |
| Saída de áudio | Conector HDMI e RCA incorporado |
| Energia em | 3Conector PIN PH2.54mm |
| Anfitrião USB | Conector tipo A |
| Chave OSD | Tecla de comutação para exibição OSD |
| Chave de gravação | Switch key for video recording |
| 3.3Uart de dados V TTL | 3Conector PIN PH1.25mm |
| 3.3Uart de controle V TTL | 4PIN PH1.25mm lockable Connector |
| Ethernet | Conector RJ45 |
| Cartão TF | Slot para cartão TF |
| PWR LED | Red led, light on when VCAN2095 is normal powered |
| LED de ligação | LED verde, blinks when video stream is normal received and decoding |
| REC LED | Green constant light when video recording |
* Chave OSD: turn on/off the status of the OSD displaying, long press it to switch(more than 1s). the status will be kept after reboot. When the OSD status is on without any OSD data input from the data uart, the system will display video information (video bitrates, etc.) on the video screen. When the OSD status is on with data input from the data uart, the system will display text information of the uart data on the video screen.
* REC key: botão de mudança para gravação de vídeo, short press to change it’s status. VCAN2095 will automatically check the storage device(cartão micro SD ou disco USB, cartão SD prioritário) after power on and start to record video when the storage device is inserted. Basta pressionar o botão para parar ou gravar novamente.
Vídeo e Áudio
| Saida de video | HDMI e CVBS |
| Formatos de vídeo | 1080P ou 720P
720*480 60EU(NTSC), 720*576 50EU(AMIGO) |
| Decodificação de vídeo | H.264/H.264 low latency mode |
| Saída de áudio | Áudio HDMI e AV integrado |
| Audio Decoding/Encoding | AAC |
| Descriptografia | AES256 |
| Armazenar | Disco USB ou cartão micro SD |
| Protocolo de fluxo Ethernet | Suporta decodificação de fluxo UDP TS, Decodificação de cliente RTSP, Encaminhamento do servidor RTSP |
Monitoramento e controle
Web UI or control uart.
Faixa de temperatura
Especificação completa: 0° a +70°C Ambiente (Opcional: -40° a +85°C )
Armazenar: –40° a +85°C
Características Físicas
Dimensões: 115x90x34mm
Peso: 240g
Requisitos de energia
Faixa de entrada: 9~25VDC
Consumo de energia: <250mA@12V
Perguntas frequentes
1º trimestre: Why is your decoder board more expensive than the decoder boards used at home?
A1: Our encoding board and decoding board are not for home use. They are mainly used in aerial drones and ground robots. Its biggest advantage is ultra-low latency. If this decoding board is used together with our encoding board, the total latency from encoding to decoding is only 50~130 milliseconds. We also provide web pages and serial port control commands. We can also customize some functions according to your project.
Ramazan Havan –
With the implementation of this decoder box, we have completely resolved all latency issues that were previously present. The video conversion process seamlessly transitions from IP to CVBS/HDMI formats, resulting in consistently clear and high-definition image quality throughout the conversion. These systems are perfectly suited for use in security systems and live broadcasts, offering unparalleled performance and reliability in both applications.