Transmisión de vídeo IP a la caja inferior de latencia del decodificador CVBS HDMI
Tabla de contenido
Característica
- This H.264 decoder supports high-definition video output at resolutions up to 1920×1080 en 60 fotogramas por segundo.
- It has Ethernet input and HDMI/AV output.
- Record video to a Micro SD card or USB drive.
- Manage this video decoder box via web UI or UART.
- With our encoder module, typical video latency is around 200 milisegundos.
- Support proprietary H.264 video decompression only used p-frames for lowest latency as 50ms to 130ms
- The VCAN2095 uses H.264 to decode video and audio; Ethernet input video is decoded and output through HDMI and AV. The input video stream may also be UDP-TS or RTSP video.
- It offers a variety of comprehensive signal outputs, including 1080p/720p HD video, vídeo de monitor CVBS HD convertido a baja velocidad, and dual analog audio.
- The VCAN2095 DVR function records to a Micro SD card or USB drive, controlled by a switch.
- The VCAN2095 also features a built-in RTSP server, allowing video streaming over Ethernet to remote software or hardware decoders (Opcional).
- This compact device is ideal for embedded applications and real-time live video monitoring over wireless or Ethernet.
- Using our video encoder, two-way wireless linker, and the VCAN2095 video decoder, the 1080p60 video signal experiences roughly a 200ms delay from input to HDMI output.
- In low-latency mode (using proprietary H.264 video decompression with only p-frames), the total latency is approximately 50~130ms.
Especificación:
OI
| salida de vídeo de alta definición | HDMI type A Connector |
| Salida de vídeo compuesto | Conector RCA |
| Salida de audio | Conector HDMI y RCA integrado |
| Poder en | 3Conector PIN PH2.54mm |
| Servidor USB | Conector tipo A |
| Tecla OSD | Tecla de cambio para visualización OSD |
| Tecla de grabación | Tecla de cambio para grabación de vídeo. |
| 3.3Uart de datos V TTL | 3Conector PIN PH1.25mm |
| 3.3Unidad de control V TTL | 4PIN PH1.25mm lockable Connector |
| Ethernet | conector RJ45 |
| Tarjeta TF | Ranura para tarjeta TF |
| PWR LED | Red led, light on when VCAN2095 is normal powered |
| LED de enlace | Green LED, blinks when video stream is normal received and decoding |
| REC LED | Green constant light when video recording |
* Tecla OSD: activar/desactivar el estado de visualización del OSD, manténgalo presionado para cambiar(más de 1s). el estado se mantendrá después del reinicio. Cuando el estado de OSD está activado sin ninguna entrada de datos de OSD desde la unidad de datos, el sistema mostrará información de video (tasas de bits de vídeo, etc.) en la pantalla de vídeo. Cuando el estado de OSD está activado con entrada de datos desde la unidad de datos, el sistema mostrará información de texto de los datos de uart en la pantalla de video.
* REC key: Botón de cambio para grabación de vídeo., short press to change it’s status. VCAN2095 will automatically check the storage device(tarjeta micro SD o disco USB, tarjeta SD prioritaria) después de encender y comenzar a grabar video cuando se inserta el dispositivo de almacenamiento. Simplemente presione el botón para detener o grabar nuevamente.
Vídeo y audio
| Salida de vídeo | HDMI y CVBS |
| Formatos de vídeo | 1080P o 720P
720*480 60I(NTSC), 720*576 50I(CAMARADA) |
| Decodificación de vídeo | H.264/H.264 low latency mode |
| Salida de audio | Audio HDMI y AV integrado |
| Audio Decoding/Encoding | CAA |
| Descifrado | AES256 |
| Almacenamiento | Disco USB o tarjeta micro SD |
| Protocolo de flujo Ethernet | Admite decodificación de flujo UDP TS, Decodificación del cliente RTSP, Servidor RTSP hacia adelante |
Seguimiento y control
Web UI or control uart.
Rango de temperatura
Especificaciones completas: 0° a +70°C Ambiente (Opcional: -40° a +85°C )
Almacenamiento: –40° a +85°C
Características físicas
Dimensiones: 115x90x34mm
Peso: 240gramo
Requisitos de energía
Rango de entrada: 9~25VDC
El consumo de energía: <250mA@12V
Preguntas más frecuentes
Q1: Why is your decoder board more expensive than the decoder boards used at home?
A1: Our encoding board and decoding board are not for home use. They are mainly used in aerial drones and ground robots. Its biggest advantage is ultra-low latency. If this decoding board is used together with our encoding board, the total latency from encoding to decoding is only 50~130 milliseconds. We also provide web pages and serial port control commands. We can also customize some functions according to your project.
Ramazan Havan –
With the implementation of this decoder box, we have completely resolved all latency issues that were previously present. The video conversion process seamlessly transitions from IP to CVBS/HDMI formats, resulting in consistently clear and high-definition image quality throughout the conversion. These systems are perfectly suited for use in security systems and live broadcasts, offering unparalleled performance and reliability in both applications.