Flux vidéo IP vers le boîtier inférieur de latence du décodeur HDMI CVBS
Table des matières
Fonctionnalité
- This H.264 decoder supports high-definition video output at resolutions up to 1920×1080 à 60 images par seconde.
- It has Ethernet input and HDMI/AV output.
- Record video to a Micro SD card or USB drive.
- Manage this video decoder box via web UI or UART.
- With our encoder module, typical video latency is around 200 millisecondes.
- Prise en charge de la décompression vidéo propriétaire H.264 utilisant uniquement des images P pour une latence la plus faible comprise entre 50 ms et 130 ms
- The VCAN2095 uses H.264 to decode video and audio; Ethernet input video is decoded and output through HDMI and AV. The input video stream may also be UDP-TS or RTSP video.
- It offers a variety of comprehensive signal outputs, including 1080p/720p HD video, vidéo du moniteur HD CVBS convertie, and dual analog audio.
- The VCAN2095 DVR function records to a Micro SD card or USB drive, controlled by a switch.
- The VCAN2095 also features a built-in RTSP server, allowing video streaming over Ethernet to remote software or hardware decoders (facultatif).
- This compact device is ideal for embedded applications and real-time live video monitoring over wireless or Ethernet.
- Using our video encoder, two-way wireless linker, and the VCAN2095 video decoder, the 1080p60 video signal experiences roughly a 200ms delay from input to HDMI output.
- In low-latency mode (using proprietary H.264 video decompression with only p-frames), the total latency is approximately 50~130ms.
spécification:
IO
| Sortie vidéo HD | HDMI type A Connector |
| Sortie vidéo composite | RCA Connector |
| Sortie audio | Embedded HDMI and RCA Connector |
| Alimentation | 3PIN PH2.54mm Connector |
| Hôte USB | Type A connector |
| OSD Key | Switch key for OSD-display |
| Rec Key | Switch key for video recording |
| 3.3Uart de données V TTL | 3Connecteur PIN PH1.25mm |
| 3.3Uart de contrôle V TTL | 4PIN PH1.25mm lockable Connector |
| Ethernet | Connecteur RJ45 |
| Carte TF | Emplacement pour carte TF |
| PWR LED | Red led, light on when VCAN2095 is normal powered |
| LED de liaison | Green LED, blinks when video stream is normal received and decoding |
| REC LED | Green constant light when video recording |
* OSD Key: allumer/éteindre l'état de l'affichage OSD, appuyez longuement dessus pour changer(more than 1s). the status will be kept after reboot. When the OSD status is on without any OSD data input from the data uart, the system will display video information (video bitrates, etc.) on the video screen. When the OSD status is on with data input from the data uart, the system will display text information of the uart data on the video screen.
* REC key: switch button for video recording, short press to change it’s status. VCAN2095 will automatically check the storage device(micro SD card or USB disk, priority SD card) after power on and start to record video when the storage device is inserted. Just press the button to stop or record again.
Vidéo et audio
| Sortie vidéo | HDMI et CVBS |
| Formats vidéo | 1080P ou 720P
720*480 60je(NTSC), 720*576 50je(COPAIN) |
| Décodage vidéo | H.264/H.264 low latency mode |
| Sortie audio | Embedded HDMI and AV audio |
| Audio Decoding/Encoding | CAA |
| Décryptage | AES256 |
| Stockage | Disque USB ou carte micro SD |
| Protocole de flux Ethernet | Prise en charge du décodage de flux UDP TS, Décodage client RTSP, Transfert du serveur RTSP |
Surveillance et contrôle
Web UI or control uart.
Plage de température
Spécification complète: 0° à +70°C Ambiante (Facultatif: -40° à +85°C )
Stockage: –40° à +85°C
Caractéristiques physiques
Dimensions: 115x90x34mm
Poids: 240g
Exigences de puissance
Plage d'entrée: 9~25VDC
Consommation d'énergie: <250mA@12V
FAQ
Q1: Why is your decoder board more expensive than the decoder boards used at home?
A1: Our encoding board and decoding board are not for home use. They are mainly used in aerial drones and ground robots. Its biggest advantage is ultra-low latency. If this decoding board is used together with our encoding board, the total latency from encoding to decoding is only 50~130 milliseconds. We also provide web pages and serial port control commands. We can also customize some functions according to your project.
Ramazan Havan –
With the implementation of this decoder box, we have completely resolved all latency issues that were previously present. The video conversion process seamlessly transitions from IP to CVBS/HDMI formats, resulting in consistently clear and high-definition image quality throughout the conversion. These systems are perfectly suited for use in security systems and live broadcasts, offering unparalleled performance and reliability in both applications.