PA1410/PA810 for DLM/DLB Module

This PA1410(or PA810) amplifier is a 10W linear power amplifier, designed for using with DLM/DLB module.

特徴:

• 周波数帯域: 1425MHz-1455MHz(PA1410), 800MHz-830MHz(PA810)
• RF入力: DLM(or DLB) module RF out(25±2dBm)
• RF出力電力: 10W(40dBmの)
• Tx gain: 18dB, when used with DLB/DLM module, set up the maximum RF power of DLB/DLM as 22~24 dBm, then the RF out power will be 40~42dbm.
• 電源投入: DC24V~30V, 最小 2.5A@28V 電源電流定格
• 消費電力: <28W平均
• 大きさ: 65*62*13.5ミリ, 金属ハウジングのコネクタは含まない
• 重量: 98グラム
• インピーダンス: 50 オーム

Working together with DLM(or DLB) モジュール:

I/O

電源投入	VDD(赤) and GND(黒) cable. It’s suggested to power with DC28V.
コントロール	Two cables, should be connected with DLM(or DLB) Switch signal pad(SCLとGND). 入力高(1.8V～3.3V) will drive the amplifier and work in Tx mode. The input low will enable the PA module to work in Rx mode.
RF入力	IPEX connector for connection with main antenna of DLM(or DLB) module.
RF出力	SMA female connector

放熱

The back side of the PA module should be assembled to metal directly and tightly to help heat dissipation. For optimal performance it is important to include adequate heat dissipation strategies that incorporate a heat sink or fan into any designs that integrate the PA module.