यह पीए1410(या पीए810) एम्पलीफायर एक 10W लीनियर पावर एम्पलीफायर है, designed for using with DLM/DLB module.
विशेषताएं:
- आवृत्ति बैंड: 1425MHz-1455MHz(PA1410), 800MHz-830MHz(PA810)
- RF in: DLM(or DLB) module RF out(25±2dBm)
- RF out power: 10डब्ल्यू(40dBm)
- Tx gain: 18डीबी, when used with DLB/DLM module, set up the maximum RF power of DLB/DLM as 22~24 dBm, then the RF out power will be 40~42dbm.
- विद्युत आगम: DC24V~30V, minimum 2.5A@28V power current rating
- बिजली की खपत: <28W average
- आयाम: 65*62*13.5मिमी, not including the connector out of the metal housing
- वजन: 98जी
- मुक़ाबला: 50 ओम
Working together with DLM(or DLB) मापांक:
मैं/ओ
| विद्युत आगम | VDD(लाल) and GND(काला) cable. It’s suggested to power with DC28V. |
| नियंत्रण | Two cables, should be connected with DLM(or DLB) Switch signal pad(SCL and GND). The input high(1.8V to 3.3V) will drive the amplifier and work in Tx mode. The input low will enable the PA module to work in Rx mode. |
| RF in | IPEX connector for connection with main antenna of DLM(or DLB) मॉड्यूल. |
| RF out | एसएमए महिला कनेक्टर |
गर्मी लंपटता
The back side of the PA module should be assembled to metal directly and tightly to help heat dissipation. For optimal performance it is important to include adequate heat dissipation strategies that incorporate a heat sink or fan into any designs that integrate the PA module.
प्रश्न पूछें
आपका संदेश भेज दिया गया है