カウンタードローンUAV信号制御モジュール

Counter Drone UAV Signal Control Module

前書き

1. The UAV signal control module is the counter-drone module.
2. Its primary function is to disrupt UAVs by emitting electromagnetic waves in specific frequency bands, interfering with their flight control and signal transmission systems.
3. To obtain the counter-effect of the drone and realize effective control of the “black flight” UAV, the drone can be forced to land or drive away quickly.

特徴

1. GaN power amplifier chip with high-efficiency
2. Real-time control of the CAN/UART bus
3. Frequency band control of discontinuous frequency points
4. Mode of low-power standby
5. Protection against output open-circuit
6. Back-up power protection
7. Extra-wide operating voltage range
8. 動作温度範囲: -40°C ～ +65°C
9. Design flexibility

仕様

動作周波数: 5720MHz～5850MHz（830MHz～940MHz,1550MHz～1620MHz,2400MHz～2500MHz）

出力パワー: 35dBm+2dB

Output power control: Output off, 半分の出力, up to three adjustable

Output voltage standing wave ratio: ≤2.0

CAN bus function: Working frequency reading and setting Output power control; Module temperature reading; Output open circuit alarm; Threshold parameter setting of temperature and standing wave ratio Module standby control.

Signal sweep period: 30uS≤Period≤40uS

Rated voltage: DC+24V (DC+9V～DC+30V)

Rated current: ≤1.2A @ DC24V

Standby working current: ≤0.05A @ DC24V

モジュール電力消費: ≤25W

Rf: 50ああ

大きさ(L * W * H): 84.5mm X 48mm X 18mm

重量: ≤150g

Structural material: アルミニウム合金 6061

Surface treatment: Anodized natural color

Heat dissipation mode:Natural heat dissipation