Counter Drone UAV signal control module

Counter Drone UAV Signal Control Module

ўвядзенне

1. The UAV signal control module is the counter-drone module.
2. Its primary function is to disrupt UAVs by emitting electromagnetic waves in specific frequency bands, interfering with their flight control and signal transmission systems.
3. To obtain the counter-effect of the drone and realize effective control of the “black flight” БЛА, the drone can be forced to land or drive away quickly.

асаблівасць

1. GaN power amplifier chip with high-efficiency
2. Real-time control of the CAN/UART bus
3. Frequency band control of discontinuous frequency points
4. Mode of low-power standby
5. Protection against output open-circuit
6. Back-up power protection
7. Extra-wide operating voltage range
8. Temperature range of operation: -40°C to +65°C
9. Design flexibility

спецыфікацыя

працоўная частата: 5720MHz～5850MHz（830MHz～940MHz,1550MHz～1620MHz,2400MHz～2500MHz）

выхадныя магутнасць: 35dBm+2dB

Output power control: Output off, палова магутнасці, up to three adjustable

Output voltage standing wave ratio: ≤2.0

CAN bus function: Working frequency reading and setting Output power control; Module temperature reading; Output open circuit alarm; Threshold parameter setting of temperature and standing wave ratio Module standby control.

Signal sweep period: 30uS≤Period≤40uS

Rated voltage: DC+24V (DC+9V～DC+30V)

Rated current: ≤1.2A @ DC24V

Standby working current: ≤0.05A @ DC24V

Module power consumption: ≤25W

Rf: 50Аб

памеры(L * W * H): 84.5mm X 48mm X 18mm

вага: ≤150g

Structural material: Алюмініевы сплаў 6061

Surface treatment: Anodized natural color

Heat dissipation mode:Natural heat dissipation